Manufacturer:
(Category: 102)
MORI SEIKI NTX2000SZ 1500 multitasking turning center, year 2012, for complete machining of complex workpieces. The machine is located in Norway. Further details, technical data, photos and video on request.
DOOSAN MX2100ST turning center, year 2022, equipped with FANUC 31i-B5 control. This multi-tasking lathe offers X1/Z1 travels of 565/1,050 mm, Y-axis ±85 mm, and B-axis indexing. Main and counter spindle each deliver 22/18.5 kW at 5,000 rpm with A2-6 nose and 8 chuck; 76 mm spindle bore accommodates bar stock up to ø65 mm. BMT55P turret with 12 driven tool positions (5,000 rpm) plus 80-station Capto C6 ATC with 12,000 rpm milling spindle (18.5/15/11 kW) and 2.0 s tool change. Single Swiss owner; delivered complete with LNS Sprint 565 S2 bar feeder (3.2 m, ø3â€34 mm), 55-bar high-pressure coolant to milling spindle, electric tool-measuring arm, parts catcher, oil-mist extraction and HAINBUCH TOPlus/Mando workholding.
Key data: 660 mm, 1500 mm
X-axis 580 mm Y-axis 150 mm Z-axis 1,545 mm B-axis -30 to 210° W-axis 1,490 mm Main spindle Drive power 22 kW Max. spindle speed 4,600 rpm Max. bar passage 52 mm Sub-spindle Drive power 18.5 kW Max. spindle speed 5,000 rpm Milling spindle Drive power 18.5 kW Max. spindle speed 12,000 rpm B-axis 0.0001° Interface for bar feeder Parts catcher Chip conveyor 50 bar high pressure pump 5-axis simultaneous machining Full C-axis bending spindle Gear Hobbing, Abwalfräsem Milling spindle synchronized threading Cylinder interpolation Preparation for multiple and flash tool holders 1 pcs LNS Quick Load Servo 3 Short Bar Loader
Key data: 380 mm, 1000 mm
Main spindle Drive power 26 kW Max. spindle speed 4000 rpm Max. bar passage 77 mm Spindle nose A2-8 Revovler Drive power milling drive 5.5 kW Max. speed driven tools 4500 rpm Tool stations 12 Mazatrol Matrix Control Main spindle with full C-axis Tooleye Tool Measurement Chip Conveyor, Right Discharge Coolant pump 15 bar Interface for bar feeder Parts catcher Tailstock 3-jaw chuck B-210 Tool holder package: 7 fixed + 3 driven tool holders CE mark Documentation
Key data: 380 mm, 1019 mm
X-axis 234 mm Y-axis 100 mm Z-axis 1090 mm Tailstock 1075 mm C-axis 360° Drive power 26 kW Max. bar passage 80 mm Max. speed 4000 rpm Number of tool positions 12 Drive power milling drive 5.5 kW Max. spindle speed 5000 rpm Powered tool stations 12
Key data: 1160 mm
Powerful vertical CNC lathe from HYUNDAI WIA Year of construction 2013 FANUC 32i Manual Guide Max. turning diameter 1,160 mm Max. swing diameter 1,355 mm Main spindle power up to 60 kW Max. torque 6,490 Nm C-axis with 0.001° resolution 12-speed BMT85P tool turret 12 powered tool stations Renishaw Q-Setter Hyundai WIA Tool Breakage Monitoring 20-bar coolant system Hinged belt chip conveyor 800 mm 3-jaw chuck Seoam CAS 32
Horizontal turning machine manufactured in 1999. This EMCO EmcoTurn 365 MC features a maximum turning diameter of 310 mm and a turning length of up to 610 mm. It includes a powerful main spindle speed range of up to 5000 rpm and a tool holder with 12 powered stations. If you are looking to get high-quality turning capabilities, consider the EMCO EmcoTurn 365 MC machine we have for sale. Contact us for further details.
This 4-axis Gildemeister CTX 400 twin was manufactured in 2001. It features a maximum swivel diameter over bed of 570 mm and a maximum turning length of 635 mm. The machine is equipped with a Heidenhain CNC Pilot control system and offers a speed range of 25 – 5,000 min⁻¹. If you are looking to get high-quality turning capabilities, consider the Gildemeister CTX 400 twin horizontal turning machine we have for sale. Contact us for further details.
Horizontal turning machine manufactured in 2014. This SEIGER SLZ 500E features a center distance of 1500 mm and a swing diameter over the bed of 500 mm. It is equipped with a powerful main drive of 20/25 kW and a maximum spindle torque of approximately 1400 Nm. If you are looking to get high-quality turning capabilities, consider the SEIGER SLZ 500E machine we have for sale. Contact us for further details regarding this machine.
Tacchi HD3/140L CNC heavy duty lathe with milling capability. Year 2001. Built for large diameters, long shafts, and demanding roughing with reliable accuracy. With 95 kW spindle power, a 2,000 mm swing over bed, and 8,000 mm between centers, the Tacchi HD3/140L delivers capacity and rigidity for continuous industrial use.This used HD3/140L offers the power and stability you need for heavy cuts, confident finish quality, and fewer setups. The 3 bed way construction and 1,400 mm bed width enhance stiffness. The full C axis with 360,000 positions and a 22 kW milling tower enable complete machining in one clamping, reducing cycle time and handling. Buyers searching for a second hand HD3/140L benefit from proven Tacchi reliability and a large working envelope.- Swing over bed 2,000 mm- Swing over cross slide 1,550 mm- Between centers turning length 8,000 mm- Workpiece weight between centers ...
Centering machine for preparing axes to be machined on lathes such as Schaublin, Emco etc. The centering is automatic according to the diameter of the parts. Satisfactory condition, belt to be changed. Three-phase motor.
Center height: 225mm, distance between centers: 1000mm, swing over bed/cross slide: 450mm/260mm, spindle bore: 65mm, max. spindle speed: 3000rpm, max. feed rate: 10m/min, tool turret: 4, main motor power: 7.5kW, control: Fanuc 0i Mate TC. Machine dimensions X/Y/Z: approx. 3500mm/1500mm/1700mm, weight: approx. 1550kg, operating hours: approx. 27000h, feed hours: approx. 1329h. Documentation available. An on-site inspection is possible.
Chevalier FCL 1840 - Ø 460 x 1000 mm CNCSwing over bed: 460 mm Swing over cross-slide: 230 mm Distance centre tot centre: 1000 mm Max longitudinal travel Z-axis: 900 mm Max cross travel X-axis: 250 mm Dia of spindle bore: 58 mm Power on the spindle: 7,5 HP Number of speeds: 40 > 2000 rpm Command: Fagor Total power needed: 5,5 kW Length: 2200 mm Width: 1400 mm Height: 2000 mm Weight: 2300 kg
turning diameter: 310 mmturning length: 450 mmcontrol: Fanuc O-TC total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC control Fanuc O-TC12-fold revolver (VDI30)3-jaw chuck main spindle3-jaw chuck sub spindlechip conveyortool measuring devicecoolant deviceTechnische Daten / technical details:Umlaufdurchmesser über Bett / rotary diameter over bed 500 mmUmlaufdurchmesser über Planschlitten / rotary diameter over sledge 310 mmmax. Drehdurchmesser / max. turning diameter 310 mmmax. Drehlänge / max. turning lenght 450 mmX-Weg / X-travel 200 mmZ-Weg / Z-travel 450 mmDrehzahl / spindle speed 4500 UpM /rpmWerkzeugrevolver / turret head 12 fach /holesStangendurchlass Hauptspindel / bar diameter main spindle 50 mmEilgang X / rapid feed X 24 m/minEilgang Z / rapid feed Z 30 m/min.Antriebsle ...
Lathe PPL 200-225 - Turning diameter over bed: 400-450 mm - Turning diameter over slide: 235-285 mm - Offset with bridge: turning diameter 600-650 mm - Face plate diameter: 350 mm - Bed width: 320 mm - Engine power: 5.5 hp - Tool carriage: 150 mm stroke Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.
Manufacturer: DOOSAN Model: PUMA 2600 Year: 2012 Condition: Used Stock number: 9439 Control system: FANUC Maximum turning length: 1245 mm Max. turning diameter: 376 mm Maximum spindle speed: 2800 1/min Weight: 5400 kg
CNC Lathe Manufacturer: Gildemeister Type: CTX 410 V3 Machine No.: 0136004581 Year of Make: 2006 Control: Siemens 840D ShopTurn Circumferential diameter: 505 mm Chuck diameter: 210 Spindle passage: 65 mm Drive power: 40/ 100%ED 21/28 KW Speed range from – to: 25-5000 Dimensions approx.: 4300x2000x1800 Weight approx.: 5600 Kg - 12-speed revolver - VDI 40 - C-axis - Powered tools 12 stations - Package bar machining - Chip conveyors - Tailstock - SMW Autoblok 210BB - Driven tool holders 3x axial - Driven tool holders 2x radial - Various other tool holders - New engine for revolver Errors excepted
CNC Lathe Manufacturer: Gildemeister Type: CTX 420 Linear V4 Machine No.: 02260005181 Year of Make: 2005 Control: Siemens 840D ShopTurn Circumferential diameter: 680 Chuck diameter: 250 Drive power: 40/ 100% ED: 37/25 KW Speed range from – to: 20-5000 rpm Weight approx.: 6500 Kg - 12-speed revolver - VDI 40 - C-axis - Y-axis - Powered tools 12 stations - Chip conveyors - Tailstock - SMW Autoblok 250 BH Errors excepted
CNC Lathe Manufacturer: Gildemeister Type: CTX 310 Engine No.: 8042942713C Year of Make: 2008 Control: Heidenhain IT Circumferential diameter: 500 mm Spindle Passage: 65 Drive power: 40/ 100% ED: 16/12 KW Speed range from – to: 25-6000 rpm Weight approx.: 3500 Kg - 12-speed revolver - VDI 30 - Chip conveyors - C-axis - Powered tools 12 stations - Package bar machining - LNS QuickLoad Servo 3 short loader - Tailstock - Hainbuch ToplusMini Axzug 65 Errors excepted
CONTROLS CNC controls SIEMENS BASIC FUNCTIONS number of spindles: 2 number of turrets: 1 number of c-axes: 2 WORKING RANGE TURNING turning diameter (max): 100 mm worpiece length max.: 150 mmMAIN SPINDLE spindle revolutions (max): 6000 /minTOOL MAGAZINE number of positions: 12 ELECTRICAL SPECIFICATIONS total power consumption: 36 kW mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS total weight approx.: 7000 kgATTACHMENTS (TURNING) hydraulic system: yes European CE standards: yes Machines in good condition:- Integrated pick-up automation- Two EMAG machines configured in a line are for sale.- A robot destacking unit with 100% parts inspection can also be purchased.
This DMG GILDEMEISTER CTV 250 Vertical lathe machine was manufactured in 2012 in Germany and has 38984 production hours. It is equipped with a SIEMENS control unit. The machine dispose of a chip conveyor and a high pressure cooling system with paper filter. The revolver head was completely renewed at the end of the previous year.
This 6-axis Takisawa TS-4000YS was manufactured in 2021. It features a maximum swing diameter of Ø 600 mm and a turning diameter of Ø 370 mm with a length of 750 mm. The machine includes a powerful 22 kW main motor and a counter spindle with a speed of 6000 rpm. If you are looking to get high-quality turning capabilities, consider the Takisawa TS-4000YS turn-mill centre we have for sale. Contact us for further details.
The machine is in good technical condition; it can be tested by prior arrangement.
Manufacturer: DOOSAN Model: PUMA GT 3100 M Year: 2023 Condition: Used Stock number: 9431 Control system: FANUC i-Series Maximum turning length: 725 mm Maximum turning diameter: 376 mm Maximum turning diameter over bed: 720 mm Maximum turning diameter over support: 590 mm X-axis travel: 260 mm Z-axis travel: 830 mm C-axis travel: 360 Maximum spindle speed: 2800 1/min Maximum workpiece weight: 1000 kg Number of all tools: 12 pieces Number of driven tools in the turret: 12 pieces Number of axes: 3 pieces Max. rod diameter: 102 mm Weight: 5650 kg Equipment: Powered tools Baking (2 pieces) Suction
An INDEX CNC lathe with counter spindle and IEMCA bar feeder is offered. Main spindle bore: 65mm, max. spindle speed: 7000rpm, axes: 4, live tooling: possible, tool system: VDI25, spindle operating hours: approx. 80000h, control: Siemens 840D. 2) Bar feeder: IEMCA Master 880/MP 33 L, Year of manufacture: 2004, max. bar length: 3300mm, round bars: 8mm-80mm, hexagonal bars: 7mm-65mm, square bars: 10mm-50mm, max. bar weight: 120kg, min. remnant length: 110mm, bar feeder weight: approx. 1350kg. Including chip conveyor. Machine was continuously maintained. The machine is available from October. Documentation available. Inspection possible by arrangement.
Horizontal turning machine manufactured in 1997. This BOEHRINGER DUC 560/2000 features a maximum turning diameter of 570 mm and a turning length of 2000 mm. It includes an 8-position disc turret and a three-jaw chuck with a diameter of 200 mm. If you are looking to get high-quality turning capabilities, consider the BOEHRINGER DUC 560/2000 machine we have for sale. Contact us for further details.
Horizontal turning machine manufactured in 2017. This KEY EAST BV-40160 features a swing over bed of 1,010 mm and a distance between centers of 4,000 mm. It includes a front and rear chuck diameter of 500 mm, along with a digital readout for enhanced precision. If you are looking to get high-quality turning capabilities, consider the KEY EAST BV-40160 machine we have for sale. Contact us for further details.
This 4-axis DMG Mori Seiki SL 2500 Y was manufactured in 2005. It features a maximum swing diameter of 755 mm and a machining diameter of 390 mm, with a maximum machining length of 655 mm. The machine includes a 12-station turret and a programmable hydraulic tailstock. If you are looking to get high-quality turning and milling capabilities, consider the DMG Mori Seiki SL 2500 Y turn-mill centre we have for sale. Contact us for further details.
- KITAGAWA 400 mm chuck- Spindle bore 110 mm- Chip conveyor- Feed rate X-Axis 20M/Min- Feed rate Z-Axis 25M/Min- Coolant and Filtration system
