lathes used for sale (3,033)

General Manufacturer: Spinner Type: Microturn LT Year of construction: 2024 Control: Siemens One Travels: X 600 mm Z 350 mm Y +/- 50 mm Switch-on hours: 4,587 h Work spindle hybrid bearing Speed: 10,000 rpm Tool/movement Tool holder: BMT45 with Y-axis Tool turret: 12-speed Condition Condition: Used Functional: tested and fully functional Other equipment and accessories included: High-precision motor spindle with a circular shape deviation and 1um Power Chuck Röhm KFD-HS 125 Power Chuck SMW Autoblok BH-D 165-46-3-A05 Various owners and AGW High-pressure system 70 bar including fine filter Chip conveyor Spindle coolers

CNC lathe BIGLIA B750 YS TECHNICAL FEATURES: Year: 2015 NC Type: FANUC series 32i-B Maximum diameter Rotation: 680 [mm] X-axis travel: 305 [mm] Y-axis travel: 140 [mm] Z-axis travel: 860 [mm] X-axis fast feed speed: 18000 [mm/min] Z-axis fast feed speed: 24000 [mm/min] Y-axis fast feed speed: 7500 [mm/min] Spindle Nose: ASA 8" Maximum diameter in bar: 80 [mm] Spindle Bore: 91 [mm] Maximum speed Spindle: 3500 [rpm] C-axis indexing accuracy: 0.001 [°] Spindle power: 22 [kW] Spindle torque: 700 [Nm] Counter Spindle Nose: ASA 5" Sub-spindle bore diameter: 55 [mm] Counter-spindle stroke: 895 [mm] Maximum speed Spindle: 5000 [RPM] C-axis sub-spindle indexing accuracy: 0.001 [°] Sub-spindle power: 25 [kW] Spindle torque: 159 [Nm] Max. section Tool holders: 25 x 25 [mm] Number of turret stations: 16 Turret Index Time: 0.3 [s/pos] Number of powered turret statio ...

centre height: 450 mmcentre distance: 6150 mmspindle bore: 140 mmturning diameter over bed: 900 mmturning diameter over slide: 660 mmspindle drive: 15 kWexternal dimensions: Breite 1750mm length: 9000 mmheight: 1650 mmweight: 8000 kgspindle speed:: 11-500 UpM With a chuck, collet, and faceplateThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bar material dia.: 32/38 mmspindle passage: 44 mmturning length: 320 mmturning speeds: 200-8000 U/minc-axis: 0,001 Gradgripping station: 32/38 mmturning length: 120 mmturning speeds: 200-8000 U/minc-axis: 0,001 0number of tools: 13 fixnumber of milling stations: 4+5 drivencontrol: Mitsubishi Meldas M70 Number of axles: 5+2 St.total power requirement: 7,5 kWweight of the machine ca.: 2850 kgdimensions of the machine ca.: 2,5 x 1,4 x 1,75 + FMB mbar loader: FMB turbo 3-36 fire distinguisher: Kraft & Bauer CNC sliding headstock machine Citizen L32-1M8, built 01/2019 with barloaderFMB turbo 3-36equipped with swarf & coolant tank, fire distiguisher.ON/OFF 29.564h (status 24.03.2026)Running hours 26.607h (status 24.03.2026)GBL function (standard)LFV function: noThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is in good technical condition, after prior agreement it is possible to test it. Fanuc i Series, Dmax320mm, X175 Z330, 5,000rpm, 12 tool positions, Tool measuring system, Part catcher, 4 jaw inserts,, Clamping pliers, many accessories

The machine is in good technical condition, after prior agreement it is possible to test it. approx. 3000 hours of TRIPS 550X400

The machine is in good technical condition, after prior agreement it is possible to test it. ideal machine for complete machining in one clamping (turning + milling). Equipment and parameters: - main spindle + counter spindle (complete machining from both sides) milling spindle with B axis Mazatrol SmoothG control 36-position tool magazine Capto C6 / PSC63 internal cooling large number of accessories (jaws, clamps, holders, etc.) a functional postprocessor for SolidCAM is included in the sale significant time and cost savings when introducing the machine into production

Support, travel carriage of a Schaublin lathe, sgt. Condition, See photos ! Rotatable, feed via lever, infeed, axles are clampable! Is for a lathe brand Schaublin ! Shipping possible !

Lathe beds, unused Compakt 5 , Compakt 8, Compakt 11, Super 11, Interchangeable Wheels , Other EMCO Parts: Clamping tables, angle tables, steady rests, lathe spindles, milling spindles, ...

Various Tool Quick Couplers, PARAT, WDR 4 , WDL4, WD4, WB4 , Price per quantity on request

An old Colchester engine lathe is available. Center height: 216mm, swing diameter over bed/cross slide/in gap: 432mm/267mm/711mm, distance between centers: 2000mm, spindle bore: 76mm, speed: 1600rpm, bed width: 343mm. Machine dimensions X/Y/Z: approx. 3200mm/1100mm/1400mm, weight: approx. 2500kg. An on-site inspection is possible.

turning diameter: 340 mmturning length: 1000 mmcontrol: Mazatrol SmoothC total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 350 mmturning length: 650 mmcontrol: 840 D SL ShopTurn Siemensgreates pass round over bed: 385 mmSwing dia. over traverse guideway: 350 mmMain spindle:: turning speed range - main spindle: 0 - 4.500 min/-1power capacity - main spindel: 11,5 / 8 kWmax. Torque: 340 Nmspindle diameter in front bearing: 130 mmspindle bore: 87 mmbar material dia.: max. 65 mmmax. chucking diameter: 250 mmspindle head: 170 h5 C-Axis: turret:: number of toolpositions: 12 pos.Shank diameter: DIN 69880: 30 mmDriven Tool Stations:: Number of driven toolspositions: 6 pos.Spindle speed - driven tool stations: max. 4.500 min -1power capacity driven tool-stations: 5,5 kWaxis stroke:: x-axis: 255 mmz-axis: 800 mmTailstock:: tailstock: 680 mmtaper of center: MK 4 clamping capacity: 6,8 kNfeeds:: feed speeds: 0 - 30.000 mm/minrapid traverse ( X / Y / Z ): 30 / - / 30 m/minFeed force ( X / Y / Z ): ...

This 3-axis DOOSAN Puma GT 3100 M was manufactured in 2022. It features a maximum turning diameter of 376 mm and a turning length of 725 mm. The machine is equipped with a 12-station tool turret and a three-jaw power chuck diameter of 305 mm. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma GT 3100 M horizontal turning machine we have for sale. Contact us for further details.

This 6-axis DOOSAN PUMA 2600 SY II was manufactured in 2022. It features a maximum turning diameter of 255 mm and a turning length of 760 mm. The machine is equipped with a 24-station tool turret and driven tools, providing versatile machining capabilities. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA 2600 SY II horizontal turning machine we have for sale. Contact us for further details.

This 8-axis DMG MORI Sprint 65 linear was manufactured in 2015. It features a maximum main spindle speed of 5000 rpm and a maximum main spindle bar diameter of 65 mm. The machine includes two turrets, each with 12 driven tool positions, and a robust coolant tank capacity of 650 liters. If you are looking to get high-quality turning capabilities, consider the DMG MORI Sprint 65 linear multi-spindle turning machine we have for sale. Contact us for further details.

This 3-axis Romi C420 was manufactured in 2013. It features a swing over bed of 430 mm and a distance between centers of 1,000 mm. The machine is equipped with a Siemens 802D control unit and has a maximum spindle speed of 4,000 rpm. If you are looking to get high-quality turning capabilities, consider the Romi C420 horizontal turning machine we have for sale. Contact us for further details.

This 8-axis DMG GILDEMEISTER Sprint 32 linear was manufactured in 2003. It features a turning length of 120 mm and a turning diameter of 32 mm. The machine is equipped with a Fanuc 160i-B control and offers impressive spindle speeds of up to 8000 rpm. If you are looking to get high-quality multi-spindle turning capabilities, consider the DMG GILDEMEISTER Sprint 32 linear machine we have for sale. Contact us for further details.

This 4-axis EMCO Turn 420 MC Plus was manufactured in 2005. It features a maximum turning diameter of 100 mm and a maximum part length of 600 mm. The machine is equipped with a powerful spindle speed range of 0–5000 rpm and a tool changer with 24 stations. If you are looking to get high-quality turning capabilities, consider the EMCO Turn 420 MC Plus multi-spindle turning machine we have for sale. Contact us for further details.