boring mills, machining centers used for sale (569)

New CNC drilling- and dowel inserting machine Brand: VITAP Type BLITZ 3.0 Blitz CNC drilling glueing and dowel inserting machine (axis X) 1300mm. Highly efficient and reliable thanks to a easy software. Ideal for JUST IN TIME production or mass production. Machine standard equipment: - Drilling head 3500 rpm - N °3 horizontal indipendent spindles - N° 3 vertical indipendent spindles - N °1 glue and dowels inserting unit - N °1 high capacity vibrator to feed the dowels - N° 1 low pressure pump for the glue Working area horizontal head: - X= 1300 mm - Y= 50 mm - Z= 50mm (vertical) - Z=25mm (horizontal) Combined drilling and driving unit for dowels: - Configurations of min. 6 x 25 mm and max. 10 x 40 mm are possible. - The desired dowel configuration must be specified when ordering. Sets for further dowel configurations are optionally availab ...

Dowel hole drilling machine Brand: VITAP Type: ALFA 21 CLASSIC New machine - One boring unit 21 spindles - QUICK CHANGE SPINDLES - Pneumatic cylinder for horizontal/vertical positioning of the boring group (45 degreed and any intermediate angles) - Front/top caliper to obtain the same boring measure between horizontal and vertical position - Tilting side stops adjustable by metric scale and nonius and magnifying lens on each stop - 2 safety clamps inclined 4 degrees - Height regulation of the boring group by mechanical digital position indicator; - 6 positions turret to adjust the drilling depth (0-80 mm) - Automatic vertical-horizontal depth difference device (10 mms) - Drilling speed adjustment from the panel control - Strengthened steel structures for tilting of the boring group - 1 motor HP. 2 (Kw 1,50) - Start/stop electropneumatic circuit by mean ...

bore capacity in steel (diameter): 10 mmbore depth: 50 mmthroat: 180 mm0: 250 - 3000 U/mintable surface area: 300 x 200 mmmachine weight ab.: 30 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

HOMAG PROFI BOF311/60/F/KC 5 axis processing centre↵↵• Fully automatic CONSOLES - CLAMPING TABLE KC↵   - 10 clamping consoles with automatic positioning unit↵   - 30 automatically positionable platforms for holding the vacuum clamps↵   - 4 lifting rails attached to the side of the consoles↵↵•  5 axis main spindle 15 kW liquid cooled.↵    - Speed range continuously programmable from 1000 - 24000 rpm.↵↵• Drive 5+ unit interface for the use of machining units. ↵↵• Drilling head 17 spindles vertical↵ - 1 motor 2,7 kW, frequency controlled Speed max. 7500 1/min↵ - 7 spindles vertical in X-direction↵ - 11 spindles vertical in Y-direction↵- 4 spindles horizontal drilling and sawing unit↵↵•  Chain changer for 30 tool / unit positions with upstream double gripper for  ...

Design: Robust industrial design Application: Precise row and dowel holes in solid wood and panel materials Drilling unit: Multi-spindle Drill heads: Vertically guided Construction: Solid steel frame construction for high stability and low-vibration running Support table: Large, enables precise workpiece guidance Drill beam: Height adjustable, pneumatically assisted Operation: Foot switch for safe working Motor: Powerful for smooth drilling progress Condition: Functional, signs of wear and tear Auction-ID: 03Z-3RB-3

Highlights • 1 x HELLER FP 2000 – 5-axis horizontal machining center (2010, SN 49995) • 1 x HELLER H2000 – 4-axis horizontal machining center (2013, SN 52728) • Integrated FASTEMS FPC 750 pallet automation with 24 memory locations and 2 set-up stations • Control: SIEMENS Sinumerik 840D / 840D sl • Tool holder: HSK63 • Spindle speed up to max. 16,000 rpm • Tool locations: 240 (FP 2000) and 408 (H2000) • KNOLL cooling systems and chip conveyors Traverses & Rapid Traverses • FP 2000 (X/Y/Z): 630 / 630 / 830 mm • H2000 (X/Y/Z): 630 / 630 / 630 mm • Rapid traverse FP 2000: 60 m/min • Rapid traverse H2000: 90 m/min Tool Changer • FP 2000 tool positions: 240 • Tool positions H2000: 408 • Max. tool length: 350 mm • Max. tool diameter: 160 mm • Max. tool weight: 12 kg Workpiece capacity • Max. workpiece diameter: 720 mm • Max. workpiece height: 100 ...

Equipment/Technical data: - Drilling gearbox V13 HighSpeed (vertical) - Horiz. Drilling gearbox with 4 spindles in X-direction - Horiz. Drilling gearbox with 2 spindles in the Y-direction - Grooving saw Ø 100 mm in X-direction - Tool change spindle incl. converter, 5 KW (HSK 63) with 4-fold tool change magazine for HSK63 - Workpiece length min. 200, max. 3,050 mm, incl. roller conveyor - Workpiece width min. 70, max. 850 mm - Workpiece thickness min 12, max. 60 mm - Workpiece weight max. 35 kg - PowerTouch control system (Full-HD multi-touch display) - WoodWop 6 programming software (without AV software) - Workpiece length-dependent machining in the X direction (4 pneumatically lowerable workpiece stops)

Code: 0288 Brand: SAC Model: F 12 Automatic working center for door and wooden window frames Technical data: Tenoning side : End cutting circular saw - Blade diameter mm 400 Motor power Hp 4 Horizontal positioning with indexing stops N° 2 tenoning spindles each lenght mm 320 Max tools diameter mm 320 Spindle diameter mm 50 Motors power each Hp 10 Max thickness of pieces mm 100 N° 2 suction inlets mm 130 Automatic table with guideline Profiling side: N° 4 profiling spindles each lenght mm 270 - Spindle diameter mm 50 Motors power each Hp 10 N° 4 suction inlets mm 130 Glass bead recovery device - Motor power Hp 3 - Blade diameter mm 200 Exhaust outlet diameter mm 60 Glass bead recovery device - Motor Hp 3 Exhaust outlet diameter mm 100 Adjustable feed speed Return roller conveyor Overall dimensions - tenoning mach ...

Second-owned machine Purchase 2019 since then production in 3 shifts until 06/25. Procedure area X-Y-Z 1000-800-800 Control: Siemens 840 D-SL No maintenance backlog Contact: Kristina Kreimer - TBAuctions E-mail: k.kreimer@tbauctions.com Phone: +49 151 66771219 Auction-ID: 045-MZW-1

Machine in first ownership Purchase 2010 since production in 3 shifts until 06/25. Procedure area X-Y-Z 800-800-800 Control: Siemens 840 D-SL No maintenance backlog Contact: Kristina Kreimer - TBAuctions E-mail: k.kreimer@tbauctions.com Phone: +49 151 66771219 Auction-ID: 045-MVU-1

Second-owned machine Purchase approx. 2024 since production for 5 months in 2 shifts until 06/25. Procedure area X-Y-Z 1000-1000-1000 Control: Siemens 8400 New spindle - 3 months term New Chip Conveyor - 3 Months Term No maintenance backlog Contact: Kristina Kreimer - TBAuctions E-mail: k.kreimer@tbauctions.com Phone: +49 151 66771219 Auction-ID: 045-NB2-1

Max drilling depth 150 mmMax drilling length 310 mmHeading 270 x 90 mmHead rotation +/- 45?Min/max height door/window 600/1000 mmWorktable dimensions 420 x 60 mmTilt adjustment work table +/- 45?Motor chain 2,2 kWFront mechanical pusherAutomatic chain lubrication pump

panel thickness: min 10mm, max 50 mmmax panel dimensions X : 3000 mm / Y : 900 mm min panel dimensions X : 300 mm / Y : 90 mm Feed speed : 20 m/minDrilling motor 2,2 kWspeed : 4,460 r/minvertical drilling spindles 86 horizontal drilling spindles, 2 x 2 in X direction, 1 x 2 in Y directiongrooving saw in X direction, diameter 125 mm

Hardware drilling and recessing machine, with multi-spindle headTable mountedMotor 1,1 kWFence left and right, 1,5 m. long

Line has got 2 throughfeed drilling machines Weeke 1st drill Weeke BST30/25, N? 0-259-05-3283-01-0810, 1992Equipment:2 x hor. Units, split drilling blocks, each with motor 1,8 kW, 13-spindle drilling blocks, centers 32 mm6 x bottom unit, split drilling blocks, each with 1,8 kW motorvertical blocks swivelling 360? Min/max motor centerdistance: 160 - 576 mmMin drilling unit center distance: 192 mmPreselection for automatic cyclesPanel sizes, length 250 up to 2500 mm, width 200 up to 800 mm, thickness 12 up to 40 mm2nd drill Weeke BST30/25, N? 0-259-05-3284, 1992Equipment:Machine prepared to take 2 horizontal units at later date6 x bottom unit, split drilling blocks, each with 1,8 kW motorvertical blocks swivelling 360? Min/max motor centerdistance: 160 - 576 mmMin drilling unit center distance: 192 mmPreselection for automatic cyclesPanel sizes, length 250 up to 2500 mm, width 200 up to ...

Process: horizontal drilling - injecting glue - driving dowels1 drilling and doweling unit, freely programmableWorkpiece dimensions:Length min/max: 20 / 1250 mmWidth min/max: 50 / 800 mmThickness min/ max: 10 / 60 mmZ-axis manually adjustableDrilling depth manually adjustableCenter stop pneumatically lowerable4 vertical pushersDouble diaphragm pump 1:1Dowels: 8 mm x 30 mm, 8 mm x 35 mmControl: Powercontrol PC85T with Woodwop software

horizontal boring - glue injection - dowel insertingSingle drill and inserter which can be freely programmedDrilling depth manually adjustableZ-axis with manual settingWorkpiece sizes: Length min/max: 20 / 1250 mmWidth min/max: 50 / 800 mmThickness min/max: 10 / 60 mmmax. workpiecewidth with middle fence on 2 fields: 600 mm, on 1 field: 1200 mmMiddle fence with pneumatic rise/fall6 vertical pressure unitsDouble membrane glue pump 1:1 Glue viscosity 350 mPasDowels: 8 mm x 30 mm, 8 mm x 35 mmControlls: Powercontrol PC85 with Woodwop software

bore capacity in steel (diameter): 20 mmbore stroke: 150 mmthroat: 285 mm: 2 speeds: 150 - 3000 U/minweight: 1700 kgdimensions of the machine ca.: 1600 x 700 x 1850 mmEquipment:- In-line drilling machine with 3 drilling units- 1 drilling head with right/left rotation- Coolant device- drill chuckThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

• Hinge drilling and inserting machine • Serial number 104 • Motor power 1,30 KW • Head with 3 spindles • Pneumatic clamp • Pneumatic driven, actuating by pedal • Table size 1500 x 370 mm • Transversal adjustment of the table approx, 60 mm • Inserting device with loader • Operating conditions of this machine: unchecked. • Transport dimensions approx. 1500 x 1200 x 2150 mm. • This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A7-42207-9

This Hüttenhölscher Line multi-spindle drilling machine was manufactured in 2012. It features a PC-controlled function sequence under Windows 7 with TwinCAT, a 6-station loading gantry, and a 2-axis gantry robot. The machine includes a vacuum generation by ejector and multiple conveyor lines for efficient material handling. Ideal for high precision drilling with its advanced control system. Contact us for more information about this machine.

This Biesse Techno Kernell was manufactured in 2010. A used multi-spindle drilling line with stacking system, it features infeed and automatic stacking units by Wamhoff. Ideal for efficient, high-volume drilling operations, this machine includes multiple drilling supports both from above and below. If you are looking to get high quality drilling capabilities consider the Biesse Techno Kernell machine we have for sale.Contact us for more information.

x-travel: 1100 mmy-travel: 650 mmz-travel: 600 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC control Sinumerik 828D2-axes dividing head (4th and 5th axis)electronical hand wheel24-fold automatic tool changercoolant through spindle devicechip screwmeasuring feelerTechnische Daten / technical details:Verfahrweg X / X-Travel 1100 mmVerfahrweg Y / Y-Travel 650 mmVerfahrweg Z / Z-Travel 600 mmTischgröße / table size 1300x600 mmWerkzeugschaft / spindle taper SK40 Drehzahlbereich / spindle speed 8000 UpM /rpmAnzahl der Werkzeugplätze / tool places in ATC 24 Eilgang X,Y,Z / rapid feed X,Y,Z 15,15,15 m/minGewicht der Maschine ca. / weight ca. 7400 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not ...

This 3-axis QUICK CNC KQ-63E was manufactured in 2025. Its a multi-spindle drilling machine capable of handling workpieces from 70 to 2800 mm in length and 50 to 1220 mm in width. Features include top and bottom milling spindles, a high-speed tool changer, and brushless servo motors. If you are looking to get high-quality drilling capabilities, consider the QUICK CNC KQ-63E machine we have for sale. Contact us for more information.

This 4-axis KOCH BL 2500 NC select line was manufactured in 2019. Ideal for multi-spindle drilling, this machine ensures precision and efficiency in your production line. Consider the opportunity to buy this KOCH BL 2500 NC select line multi-spindle drilling machine. Contact us for more information.

This QUICK CNC KQ-62 Lite multi-spindle drilling machine was manufactured in 2025. It handles workpieces from 70 to 2400 mm in length, 9 to 60 mm in thickness, and 30 to 1220 mm in width. Features include a Higerman control system, dual 3.5 kW milling spindles at 18000 rpm, and comprehensive drilling units. Consider the opportunity to buy this QUICK CNC KQ-62 Lite multi-spindle drilling machine. Contact us for more information.

This Hüttenhölscher Drilling rig was manufactured in 2010. It features a PC-controlled function sequence under Windows 7, TwinCAT, and a used drilling system with a 6-station loading gantry. The rig includes a 2-axis gantry robot, Y/Z axes with servo motors, and a travel distance of Y-axis 8500 mm, Z-axis 1500 mm. It also has a suction crossbeam with a four-circuit vacuum supply. Contact us for more information about this machine.

bore capacity in steel St 60: 25 mmbore capacity in cast iron GG 20: 30 mmDrilling capacity in St 60: 30 mmthreading in St 60: M 16 threading in GG 20: M 20 Short spindle: MK 3 spindle stroke: 140 mmthroat: 293 mmcolumn diameter: 115 mmMachine table - usable table surface: 514 x 360 mmT-Slots Amount - Width - Distance: 2 x 14 x 224 mmDistance spindle-table min.: 132 / 724 mmfeed: von Hand spindle turning speed - stepless: 100 - 1.800 U/mintotal power requirement: 1,0/1,6 kWweight of the machine ca.: 260 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel St 60: 25 mmbore capacity in cast iron GG 20: 30 mmDrilling capacity in St 60: 30 mmthreading in St 60: M 16 threading in GG 20: M 20 Short spindle: MK 3 spindle stroke: 140 mmthroat: 293 mmcolumn diameter: 115 mmMachine table - usable table surface: 514 x 360 mmT-Slots Amount - Width - Distance: 2 x 14 x 224 mmDistance spindle-table min.: 132 / 724 mmfeed: von Hand spindle turning speed - stepless: 225 - 4300 U/mintotal power requirement: 1,0/1,6 kWweight of the machine ca.: 260 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Frame dowel and slotted hole drilling machine from Hofmann HT 200 U with angle adjustment Special drilling machine for staircase construction, window construction and universal use by pneumatic height adjustment. Angled dowels and picket holes are easy thanks to the rotatable drilling unit realizable. Motor pole-switchable, two speeds Motor power 1.5 / 1.8 kW, 1400 / 2800 rpm Start of the motor with practical handle switch Precision Chuck with Two Inserts 16mm and M10 Thread Table size approx. 1100 x 240mm Linear laser for exact positioning of the workpiece Drilling unit can be rotated 65 degrees to the left and right Pneumatic adjustment of the processing height, dowels on two levels without changing The desired drilling heights can be achieved for each drilling level with a handwheel and digital counter , the changeover is then pneumatically done from the front Transve ...

Construction • Sturdy steel frame • Gantry system • 6 consoles / 12 vacuum pods • Central suction connection via two flexible hoses • Cable towing system for X, Y and Z axes • External control cabinet (fully equipped) • Tool holder via quick-change spindle (HSD / Weeke typical) Axles (typical for Weeke BP 155) • X-axis: approx. 3000–3300 mm • Y-axis: approx. 1200–1500 mm • Z-axis: approx. 150–200 mm useful stroke Table system • 6 brackets, individually movable • 2 vacuum pods per console (12 in total) • Profile guides for quick positioning Dimensions of the machine Based on the Weeke-BP series and the visible structure: Total length: approx. 5.5 – 6.0 m Overall width: approx. 2.5 – 2.8 m Total height: approx. 2.3 – 2.6 m Editing Field: approx. 3100 × 1300 mm Control cabinet: approx. 1.0 m × 0.8 m × 2.1 m Weight Weeke BP machi ...