subcategories
(3rd category level)
Manufacturer:
(Category: 205)
Manufacturer: Vitap, Type: Point K2, Year: 2018, Barcode scanner: yes, Machining stations: 1050, Work piece width min-max mm: 1010, Work piece length min-max mm: unendlich, Work piece thickness min-max mm: 50, 3 axis control: yes, Working range X: 270 - unendlich, Working range Y-axis: 185 - 1200, Working range Z: 4 - 50, Vertical drilling station from below: 9, Milling spindles horizontal: 1 vertikal, Power kW 1: 5,0, RPM min-max 1: 12.000 - 24.000, Milling spindles vertical: yes, Horizontal drills-X: 2 + 2, Drill horizontal Y: 1 + 1, Sawing unit: 100 mm, Lochraster: 32, Machining stations: 1050, Year :2018
Manufacturer: Weeke, Type: BHC 600 Profiline, Year: 2003, Control: Weeke, Working range X: 9.000, Working range Y-axis: 1.790, Working range Z: 370, C axis: yes, Work piece width min-max mm: 1.300, Min.-max. workpiece length in mm: 7.250, Min.-max. workpiece height in mm: 100, Feeding speed max m/min: 80, Pendulum processing: yes, Number of milling spindles vertical: 1, Tool adaption system: HSK 63, Milling engine 1 hours power: 12, Number of tool changers: 2, Tellerwechseler: 2, Number of tools per tool-magazine: 8 + 18, Mitfahrender Werkzeugwechsler: yes, Vertical drills-X: 10, Drill vertical Y: 10, Horizontal drills-X: 3, Drill horizontal Y: 3, Number of tables: 2, Traverse table: yes, 2 station allocation: yes, Saw unit: yes, Laser positioning: yes, Year :2003
Manufacturer: Biesse, Type: Rover 6.50 5-Achsmaschine conf.2, Year: 2006, Software: Editor 2.2.1.273, Working range X: 4600, Working range Y-axis: 1535, Working range Z: 230, C axis: yes, B-axis: yes, Programming station office: möglich, Number of milling spindles: 1, Milling engine 1 hours power: 12, rpm 1): 1500-2400, Kettenwechsler: yes, Number of tools per tool-magazine: 14, Mitfahrender Werkzeugwechsler: yes, Traverse table: yes, 4 station allocation: yes, Stops in the table front: yes, Stops in the table rear: yes, Vacuum pumps m³/h: 120, Rigging support table: yes, Tool clamping system: HSK-63 F, Saw unit: yes, Radial arm machine: yes, Werkstückspannsystem: Vakuum, Schnittstelle DXF: yes, machine ready for demonstration: yes, Zentralschnierung: yes, Presentation possible: yes, Year :2006
Manufacturer: Homag , Type: Genius 20/50/16/V/G, Year: 1998, Control: Homatic, Feeding speed max m/min: 80, Working range X: 5600, Working range Y-axis: 1600, Working range Z: 60/120, C axis: yes, B-axis: no, Tool adaption system: HSK F 63, Milling engine 1 hours power: 12, rpm 1): 1500 - 18000, Number of tool changers: 1, Number of tools per tool-magazine: 30, Vertical drills-X: 5, Drill vertical Y: 5, raster table: Glattisch, 2 station allocation: yes, 4 station allocation: yes, Stops in the table front: 14, Stops in the table rear: 3, Vacuum pumps m³/h: 66 + 100, Saw unit: yes, Edgebanding unit: yes, Edgeband hight mm: 40, Marking laser: yes, Year :1998
Manufacturer: Priess und Horstmann Frontenbohrautomat, Type: BAT III, Year: 1994, Control: Priess und Horstmann, Barcode scanner: yes, 3 Achsensteuerung: 3, Working range X: 2 X 1500, Work piece width min-max mm: 190 - 600, Work piece length min-max mm: 100 - 1500, Work piece thickness min-max mm: 10 - 60, Automatic setting up: yes, Drilling supprt from bottom: 7 Spindeln, Drill support from top: yes, Number of milling spindles: 1 , Power kW 2: 2,2, RPM min-max 2: 18000, Sawing unit: 1,6 kW, Line screw running units: yes, Feeding speed max m/min: 60/80/10, Pneumatic clamping: yes, Cycle rate: 400, machine ready for demonstration: yes, FREE TEXT: Maschine ist für Hettich Beschlag/Puffersetzautomat , Year :1994
Manufacturer: Weeke, Type: Optimat BP 145, Year: 2001, Control: Homatic 2000 IPC, Software: Woodworp, Working range X: 3250, Working range Y-axis: 1300, Working range Z: 100, C axis: yes, Feeding speed max m/min: 80/60/20, Pendulum processing: yes, Number of milling spindles: 1, Tool adaption system: HSK63F Kegel, Milling engine 1 hours power: 9, rpm 1): 1250-24000 FU geregelt, rpm 2): t, Number of tool changers: 1, Tellerwechseler: yes, Number of tools per tool-magazine: 8, Mitfahrender Werkzeugwechsler: yes, Horizontal drills-X: 4, Drill horizontal Y: 2, Traverse table: yes, Stops in the table front: yes, Stops in the table rear: yes, Vacuum pumps m³/h: 100, Drill vertical: 22, Saw unit: yes, FREE TEXT: 2x Freiplätze für zum Nachrüsten vorbereitet, Year :2001
Manufacturer: Reichenbacher, Year: 2011, Control: Siemens Sinumerik 840 D Solution Line mit NCU 720.2, Software: Frame-Concept, Work piece width min-max mm: 300-1500, Min.-max. workpiece length in mm: 2 X 2200 oder 1 X 4000 X 1600, Min.-max. workpiece height in mm: 10-120, Work piece width min-max mm: 300-1500, Min.-max. workpiece length in mm: 2 X 2200 oder 1 X 4000 X 1600, Number of milling spindles: 2 X 5 Achs, Tool adaption system: HSK 63, Milling engine 1 hours power: 18, rpm 1): 1000-24000, Kettenwechsler: yes, Number of tables: 2, Traverse table: yes, 2 station allocation: yes, Stops in the table front: yes, Vacuum pumps m³/h: 250, Portal machine: yes, Automatic setting up table: yes, Charging system double-sided: Roboter, Destacking unit: mit Lagerplätzen, Automatic charging: Roboter auf Fahrportal, Presentation possible: yes, FREE TEXT: Bohr undBänder Eindrehstation, Year :20 ...
Manufacturer: Morbidelli, Type: 503, Year: 1998, Control: Tria 7000, Feeding speed max m/min: 75, Working range X: 3200, Working range Y-axis: 1050, Working range Z: 80, C axis: yes, Number of milling spindles: 1, Tool adaption system: ISO 30, Milling engine 1 hours power: 7,5, rpm 1): 18000, Number of tool changers: 1, Number of tools per tool-magazine: 8, Vertical drills-X: 11, Drill vertical Y: 7, Horizontal drills-X: 4, Drill horizontal Y: 2, Traverse table: yes, 4 station allocation: yes, Stops in the table front: yes, Stops in the table rear: 4, Vacuum pumps m³/h: 120, Tool clamping system: ISO 30, Saw unit: Starr in X Richtung, Radial arm machine: yes, Year :1998
Manufacturer: Biesse Rover A, Type: Rover A, Year: 2008, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 145-3685, Min.-max. workpiece height in mm: 6-80, C axis: yes, Number of milling spindles: 1, Milling engine 1 hours power: 12, U/min 1): 1500-24000, Number of tool changers: 1, Number of tools per tool-magazine: 18, Vertical drills-X: 7, Drill vertical Y: 8, Horizontal drills-X: 4, Drill horizontal Y: 2, raster table: yes, 2 Platzbelegung: yes, Anschläge im Tisch vorne: yes, Vacuum pumps m³/h: 250, Tool clamping system: HSK F 63, Drill vertical: 15, Saw unit: yes, Year :2008
Manufacturer: Weeke, Type: Optimat BHX 500, Year: 2007, Control: PC 85, Software: Woodwop, Barcode: Ja, Online connection: möglich, Operating system: Windows, Work piece width min-max mm: 70-1000(1300), Work piece length min-max mm: 200-2500, Work piece thickness min-max mm: 8-80, Working range X: 2500, Working range Y-axis: 1000, Working range Z: 80, Beschickungsband: 32, Vertical drilling station from below: 32, Drill support from top: 2, Drilling heads overall: no, Tool changer: 2, Drill vertical Y: 32, Horizontal drills-X: 32, Drill horizontal Y: 8, Zwischentransport: 2, Lock case moulding aggregate: 2 , Number of spindles: 2x2,7, Year :2007
Manufacturer: MAW IMA, Type: Frontenbohranlage, Year: 2000, Control: Ferrocontrol, Program: yes, Function: Bohren und Beschläge setzen, Work piece width min-max mm: 300-600, Min.-max. workpiece length in mm: 400-1500, Min.-max. workpiece height in mm: 16-22, Destacking unit: yes, Inlet roller conveyor: Hordenwagen, One or two Spot machine: Stern 4 Platz, Working stations: 4, Dowel driving station: no, Milling spindles horizontal: no, Milling spindles vertical: no, Fitting type: Topfband, Belt drilling stations: yes, Bänder Eindrehstation: yes, Hinges inserting unit: yes, Magazin for hinges!: yes, Set buffer: yes, Dowel driving station: no, Working range X: 1500, Working range Y-axis: 600, Drill gearings: 2, Drilling supprt from bottom: 1 Verstärktes Bohrgetrieb Beschlag/ L Bohrkopf ca.12 spindeln, Drill gearings: 2, Drill support from top: 1 Stück 3 Spindeln, Drill gearings: 2, Charg ...
Manufacturer: HOMAG Optimat , Type: BOF 32/30/K, Year: 1999, Control: Homatic, Maschinensteuerung: 80, Programming station office: 3600, Work piece width min-max mm: 1200, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 1, Throuh running machine: 2, Feeding speed max m/min: HSK 63, Working range X: 12, Working range Y-axis: 24000, Working range Z: 12, Working range Y-axis: 24000, B-axis: 2, Pendulum processing: 12, Tool adaption system: 2 X 12, Milling engine 1 hours power: 2 X 7, U/min 1) Vertikal: 2 X 6, Milling engine 2 hours power: 2 X 6, Frässpindel horizontal 1 kW: 4, U/min 1) Horizontal: yes, Bohrergetriebe Horizontal: 2 X 120 , Kettenwechsler: no, Working widht max mm: yes, Max. working depth in mm: inkl Werkzeuge und Zubehör, Year :1999
Manufacturer: Priess und Horstmann, Type: BAT III, Year: 1995, Control: Priess und Horstmann, Program: yes, Funktion: Frontenbohrmaschine, Work piece width min-max mm: 150-600, Min.-max. workpiece length in mm: 150-1300, Min.-max. workpiece height in mm: 10-45, One or two Spot machine: 2, Working stations: 2, Feeding speed max m/min: 80, Fitting type: Blum, Set buffer: yes, Working range X: 21300, Working range Y-axis: 2600, Working range Z: 60, Vertical drills-X: 2, Drill vertical Y: 15, Horizontal drills-X: no, Drill gearings: 3, Drilling supprt from bottom: 2, Drill gearings: 3, Drill support from top: 1, Drill gearings: 3, Hinges inserting unit: yes, Magazin for hinges!: yes, Radial arm machine: yes, Year :1995
Wood step drill bits, wood drill bits, countersink bits, end mills, drill chucks, click-type quick-change chucks -for: row drilling machine, hardware drilling machine -from: a woodworking shop -15 kg: Milling cutters, drill bits, countersinks, click-type quick-change chucks
Spindle machining unit, automatic drilling machine, drilling machine, pillar drilling machine, multi-spindle drilling machine, row drilling machine, dowel drilling machine -Drive: 0.25 kW -Speed: 2755 rpm -Drill head: Ø 12 mm -fixed, without feed -Number: 3x drill heads available Price: per piece -Dimensions: 470/120/H150 mm -Weight: 7 kg/piece
Spindle machining unit, automatic drilling machine, drilling machine, pillar drilling machine, multi-spindle drilling machine, row drilling machine, dowel drilling machine -Drive: 0.25 kW -Speed: 2755 rpm -Drill head: Ø 12 mm -fixed, without feed -Number: 8x drill heads available Price: per piece -Dimensions: 700/120/H150 mm -Weight: 11 kg/piece
Drill stand, drill stop, drill press stand, drill jig, drill bushing jig-Quick release device-Max. Height: 100mm-Dimensions: 400/240/H220 mm-Weight: 22 kg
Dowel drilling machine, dowel drilling machine, drilling and dowel station, row of holes dowel drilling machine, knothole drilling machine, row drilling machine, drilling beam, multi-spindle drilling head, articulated multi-spindle head, row drilling machine, dowel drilling head, dowel drilling machine, drilling gear -Drive: 1.5 / 2.0 kW -Drill speed: 2200/4400 rpm -pneumatic workpiece clamping -15 drill bits from below, grid 32 mm -Bore head: swiveling -Foot switch -Bore depth: max. 185 mm -Height adjustment: max. Mm -Max. Clamping height: 110 mm -Dimensions: 950/1100 / H1350 mm -Weight: 616 kg
machining unit, drilling machine, drilling machine, pillar drilling machine, multi-spindle drilling machine, row drilling machine, dowel drilling machine-Manufacturer: Perske, Quill machining unit-Drive: 1.5 kW-Speed: 2800 rpm-Stroke: 55 mm-Dimensions: 720/200/H175 mm-Weight: 38 kg
Impact drilling machine, row drilling machine -Support table: 2200 mm -Multi-spindle head: 5 drill bits -Drill spacing: 32 mm (other multi-spindle heads available) -Version: mobile -Stops: adjustable -Dimensions: 2300/600/H1350 mm -Weight: 240 kg
Multi-spindle drilling machine -4 motors (1 motor defective) -pneumatically exciting -Drilling depth approx. 30 mm -Max. drilling distance: 1000 mm -Drive: 0.36 kW 2800 rpm -Weight: 280 kg
Spindles, machining unit, automatic drilling machine, drilling machine, pillar drilling machine, multi-spindle drilling machine, row drilling machine, dowel drilling machine -Max. feed rate: Stroke 60 mm -Drive: 1.1 kW -Recording: 10 x 17 mm -Number: 2x quill processing units available Price: per piece -Weight: 25 kg/piece
Multi-spindle head, multi-spindle drill head, dowel drill head, hardware drill head -Dimensions: 190/85/75 mm -Drilling distance: 26 mm -Medium drill bit: offset by 5 mm -Number: 1x drill heads available Price: per piece -Weight: 2 kg/piece
Cup hinge drilling machine -Stops: pneumatically controlled with program selection -Drilling pattern: see the pictures -Dimensions: 4000/1100/H1800 mm
Processing unit, automatic drilling machine, drilling machine, floor drilling machine, multi-spindle drilling machine, row drilling machine, dowel drilling machine -Drive: 1.1 kW -Speed: l 2665 rpm -Thread recording -Adjustable drilling distance: 15-65 mm -Number: 2x processing units available -Price: per piece -Weight: 23 kg/piece
Number of spindles in row of holes: 11 Number of spindles horizontal: 3 Cup belt drill head: yes, Blum Drill pitch: 32mm Power consumption: 2.2kW
Used machine Rows of holes Dowel drills Manufacturer: Ganner Type: Gannomat 120 Year of manufacture: unknown Power: 1.1 kW Working range: Drilling stroke: 120 mm
Dimensions (L/W/H): 3300x2100x2100 mmWeight: 1500 kgTotal power requirement: 14 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Drilling depth: 60mm, min. workpiece width: 800mm, max. workpiece length: 2500mm, workpiece height range: 10mm-60mm, machine dimensions X/Y: 1400mm/1400mm, weight: approx. 750kg. Documentation available. An on-site inspection is possible.
Dimensions (L/W/H): 8800x2900x2100 mmWeight: 6500 kgTotal power requirement: 18-36 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
