GÖTZINGER / HOFFMANN type RB S Dowel drilling machines

Dowel and stair drilling machine GÖTZINGER RBS swivel with laser

very good condition, the machine has been used very little and is as good as new, it comes from an educational institution
it can be used to drill dowel holes and similar things
the machine has a drill head type BKF-5 with 5 drill bits M10 female thread, the distance between the drill bits horizontally is 32mm, vertically it is 25mm
the whole drill head can be swivelled 360° with degree display and different grids, a normal 2-jaw chuck can also be used
You also get 3 drill bit holders, for drills with a cylindrical shank of 12 or 16mm, and for drills with an M10 external thread
the machine table is 1100mm wide and 250mm deep, there is a stop at the front that can be lowered if necessary
for the production of dowel connections there are 2 adjustable angle stops on the machine table, which can be adjusted with an exact scale, in addition there are two 2500mm long stop rails with 2 folding stops and scale each, these stop rails can be mounted on the left and right
the machine drilled completely automatically, which was problematic with larger drill diameters, for this reason the machine was converted to manual feed by feed lever and switch
the workpiece is clamped with 2 pneumatic clamping cylinders, the switch is located directly on the clamping cylinder
380V, 2100W
2820 rpm
Year of manufacture 2005
Weight: approx. 300kg
with the machine you can make all kinds of frame dowel joints, right angle, blunt and mitred
ideal for the production of dowel connections in timber frame construction, furniture doors and window construction and similar things, especially stairs can be manufactured very well due to the swivel option
the drilling unit can be swivelled on both sides up to 65° with scale and has a grid at 0°, so the machine can also be used to drill railing rods into stair stringers very well
due to the stops, the drill head and the design of the machine, dowel connections are made in the shortest possible time, which makes the machine very economical
the machine requires a compressed air connection of 6bar (the air consumption is very low)
Clockwise
Mills and drills very well and cleanly
the linear laser at the top of the machine allows torn dowel holes and inclinations to be drilled very quickly and accurately
the max. drilling height is 100mm, the drilling height is adjusted at the front under the machine table with a handwheel, the height can be read on a very precise, mechanical counter
the max. drill hole depth is 190mm with stop and scale
The max. workpiece height is 360mm
Everything works perfectly
with description
the machine will be delivered and demonstrated by us personally for 220.00 euros throughout Germany, so you have no risk when buying, delivery to Austria and the rest of the EU is also possible on request
Professional equipment, no DIY store scrap
you can start working with the machine immediately
Very stable and durable construction
the precision guides with the backlash-free ball bearing bushings are OK and go easily, the swivel mechanism is also very smooth due to 2 groove bearings, the locking is possible with a locking screw