used Fittings drilling machines for sale

•Hardware drill BLUM Minipress •Machine is still in operation •from carpentry dissolution due to retirement •from location

1.1 kw per drilling unit with spraying direction and suction device For aluminium frames Very good condition Stop Right-Left Built in 1998

PIVOT AND DRILL FITTINGS Attacks left and right 2200 ´ mm Motor 400 V

Description: machine number 867642, motor approx. 0.75 kW, drilling gear for pot bands, drilling gear for row hole drilling, with 7 spindles, grid 32 mm, fence right and left with tilting stopsdimensions (l x w x h) approx.: 1,400 x 900 x 1,600 mm, weight approx.: 90 kg

Ganner 191M Fitting and hole row drilling machine 7-spindle drill head 3 and 1 spindle drill head Hole row drilling machine System 32 Speed 2800 U/1 Tabletop model various drills 0.75 KW 400V 50HZ with stop rails Masch. Item no. 296 544 Manual drilling feed Underframe Year of construction 1985 G&2921-F9793

Fitting drill Ganner L x W x H: 1.20 x 0.80 x 1.40 m + stops Weight approx. 400 kg Built in 1987 The machine is in good condition, ready for operation. Changes, errors, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Drill head swivelable grid 18 drill bits 32 mm spacing + 42 mm for pot strips cleaned functionally tested with blow-off device and lots of accessories

Fitting drilling machine Grass BBM-R with substructure with stop L x W x H: 2.5 x 1.0 x 1.8 m Weight approx. 350 kg Year of construction 1992 The machine is in very good condition, ready for operation, Changes, errors, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 fax 0041 62 966 21 12

University Press grass for pot hinge drilling and injection is ready for use in good condition. Weight approx. 40 kg Built in approximately 1996 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Blue Max mini Hardware drilling machine Spindle number 6 Table-top model Engine 0,8 KW 400V 50 Hz Masch. No. 04416 Pneumatic drill feed Fence without stand (optional) Year of build 2016 G & 2574-M3I2J

Hettich-blue-mini-MAX Hardware drilling machine Type Blue-Max-mini Spindle number 4 Table-top model Motor 0.75 KW 400V 50 Hz Masch. No. 01395 Manual drill feed without stand (optional) Built in 1995 G & 2827-M3I2J

Hettich YYB-800 Hardware drilling machine BLUEMAX YYB-800 type Spindle number 6 (2-3-1) Table-top model 1 KW 230V Masch. No. 09411 Manual drill feed Without stand (optional) Year 2011 G & 2569-M3F6Nl

Electric Pneumatic pot belt drilling machine MAW BEV for drilling pot belts or fittings • Support table: 300 x 37 cm • Motor: 1.6 kW • Weight: 180 kg.

Hardware drill Ruchser RU EBL2, 5-S Masch. No. 00664-2-96 Weight approx. 700 kg Built in 1996 L x W x H: 350 x 80 x 130 cm The machine is in good condition, ready to use. Spare parts/service MATEC CH-4952 Eriswil/DE-79618 Rheinfelden Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Description: technical data: serial number 501030 connection 400 V frequency 50 Hz current 4,7 A 2 x pressure holders 21 x drills total drill hole distance 660 mm table 900 x 350 mm please have a look at the video of the machine  ,Drill beam: Yes, Drill head for concealed hinge: No, Press-in device: No, material clamping: ✔, swiveable drilling unit: 90 °, dimensions (l x w x h) approx.: 1,200 x 1,050 x 1,400 mm, weight approx.: 350 kg

with 6 drill heads 64x64 mm with 6 pneumatic stops with manual stops 20 programs Absauhaube