used Column-type drilling machines for sale

: 34 mm: 40 mm: 40 mm: MK 4 : 100-1.800 U/min.throat: 300 mm: 615x430 mm: 2 x 14 x 224 mm: 138/688 mmcolumn diameter: 145 mmspindle stroke: 160 mmfeeds: 0,1-0,2-0,3-0,4 mm/UMachine height: 1865 mmtotal power requirement: 1,4/2,2 kWStandard equipment:- Electromagnetic feed clutch with overload protection and electricalCross Handle Switches- Main switch lockable- Motor protection switch- Mushroom pushbutton (latching) for EMERGENCY STOP in the front panel- Speed adjustment stepless- Speed display digital- Protection class IP 54- Motor insulation class F- Spindle protection with electrical protectionPos. 20.1Tapping device with foot switch, for thread cutting withStop, max. 6 threads/min., (Tapping power dependent on spindle speed)Pos. 25.Coolant device B, consisting of: separate container (33 l), pump withMotor protection switch, complete fittingThe data for this ad was created with ModulM ...

bore capacity in steel (diameter): 30 mmthroat: 210 mmbore stroke: 110 mmspindle taper MT: 3 speeds: 10 von 140-1800 U/mintable-size: 320 x 400 mmcolumn diameter: 100 mmdrill diameter: max. 31 mmDistance spindle/table max.: 710 mmtotal power requirement: 1 kWweight of the machine ca.: 210 kgdimensions of the machine ca.: 0,4 x 0,7 x 1,73 mElectric 380 Volt: Column drilling machine with manual feed, speed regulation viaStep discs and 2-stage motor as well as spindle right - left rotation.Machine dealer with own stock of 1600 m²The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mmthroat: 300 mmbore stroke: 150 mmbore capacity in cast iron: 36 mmspindle taper MT: 3 spindle turning speed - stepless: 140 - 1400 U/mintable-size: 500 x 360 mmcolumn diameter: 125 mmtotal power requirement: 1,5 kWweight of the machine ca.: 335 kgdimensions of the machine ca.: 500 x 800 x 1850 mmThe machine comes from a training company and has been maintained more thansecond hand.The general condition is very good, all functions have been checked.Accesories:- Drill chuck- infinitely variable speeds- lightingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 25 mmbore stroke: 150 mmShort spindle: MK 3 T-Slots Amount - Width - Distance: 2x14x180 mmbase plate: 380x390 mmturning speeds: 60-1400 U/minvoltage: 380 VYear: 1977 0no. of spindles available: 1 table surface - upper: 705 mmclamping surface (upper): 400 x 315 mmbase plate: 135 mmbore spindle - and spindle ram diameter: 39,6 mmweight of the machine ca.: 320 kgdimensions of the machine ca.: 550x870x1900 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pillars - or drilling machines Smoothness thanks to polished splined hubs High concentricity by hardened and ground spindle Large speed range Heavy, solid casting Drilling depth stop adjustable with millimetre scale Low maintenance gearbox with grease lubrication Electrical connection: 400 V / 3 pH 50 Hz Engine power: 1,1 / 1,5 kW Drilling capacity in steel: Diameter 28 mm Spindle retainer: MK 3 Projection/Quill stroke: 260 mm / 127 mm Spindle speeds/levels: 75 - 2900 min-1/8 Table length x width / T-slots: 376 x 394 mm / 14 mm Column diameter: 92 mm Dimensions Lxwxh: 670 x 550 x 2, 080mm Net weight: 184 kg G & pieces 3034230

bore capacity in steel (diameter): 40 mmthroat: 315 mmbore stroke: 200 mmtaper MK: 4 speeds: 12: 56-1120 U/minbore capacity in cast iron: 50 mmtable-size: 700 x 450 mmDistance spindle/table max.: 710 mmtotal power requirement: 4/3,43 kWweight of the machine ca.: 1 tdimensions of the machine ca.: 1,14 x 0,7 x 2,58 mElectric 380 Volt: Thread cutting device: Croll-moving table: Vice: BB 175 mmHeavy gear drill with automatic spindle feed, 2-stage motor, 12 speeds, thread cutting device with Re-Li barrel, height-adjustable drill head and work table. Sliding cross table with locking make Alzmetall Mod. 6000PR, 750 x 420 mm table size, travel x/y = 400 x 200 mm.Machine dealer with own stock of 1600 m²The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 28 mmthroat: 320 mmbore stroke: 150 mmspindle taper MT: 3 MKtable:: 500 x 350 mmcolumn diameter: 105 mmturning speeds: 75 - 3010 U/mintotal power requirement: 0,9 / 1,2 kWweight of the machine ca.: 235 kg.range L-W-H: 1740 x 670 x 850 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mmthroat: 330 mmbore stroke: 190 mmspindle taper MT: 4 MKtable:: 500 x 400 mmcolumn diameter: 140 mmturning speeds: 90 - 1500 U/mintotal power requirement: 2,2 kWweight of the machine ca.: 435 kg.range L-W-H: 570 x 930 x 2170 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Weibert SB 4132SM Box column drill Technical Specification Motor power - W 1500/2200 400V Drilling capacity in mm 32 Spindle stroke in mm 120 Drilling spindle holder MK4 / MT4 Drilling spindle speed in min-1 (24) 60-3480 Column diameter in mm 90 / 2.5 Gross weight in kg 125 GMHM SB4132SM

SB163VH Box column drill Motor: 1100W 230V 50Hz Table size: 356x356 mm Dimensions set-up: 740x470x1710 mm Drilling capacity max. D= 16mm Max. spindle stroke 150mm LCD display Variable speed adjustment LED light Spindle mount MK3 Drilling spindle speed 460-2100 1/min Drilling depth stop Fold-away quick-release chuck cover tilting drill table +/-45° arbitrarily height-adjustable solid base plate Drill column with ground surface Weight 88.5 kg G&HM-SB163VH-230V

Dear customers currently we offer you a refurbished columns or column drilling machine from F. Zimmermann for sale. The special feature of the machine is the work table adjustable in 3 levels. Here are the other technical data of the machine: Speeds: 100 - 2,250 rpm Work light MK3 recording (new) Swivel radial: 360° Swivel axisial: 2x 90° Quill stroke: 160 mm Projection column spindle center: 500mm Table: 490 x 400 mm Centering disc Ø: 55 mm H7 working height swivel table: 715 mm working height base plate: 1,215 mm Base plate and table with T-slot 12 mm Dimensions: 600 x 1,120 x 1,930 mm Power: 1.5 kW Weight: approx. 500 kg After the overhaul, the machine has a completely new electrical system including engine brake, is painted light grey in RAL 7035 and comes with a drill set. We look forward to your questions and inquiries! If you have any questions, please ...