other wood working machines used for sale (1,326)

We are offering for sale a Weinig planing line consisting of: - Stacking system (x2) (can also be rotated 180 degrees) - Slat disposal - Isolation - Weinig Hydromat 22 – 7 spindles, up to 80 m/min feed speed ( new control) - sorting station - capping - Bundling Specifications: - Total line length: 35 meters - Total line width: 15 meters Find more here - / Contact us at -

Single-shaft shredders Technical Specification: Hopper opening: 600 x 800 mm Hopper capacity: 0.6 m³ Working width of the rotor: 600 mm Diameter of the rotor: 260 mm Drive power: 15 kW Rotor speed: 90 rpm Number of knives: 14 pieces + 2 pieces Type and size of the knives: concave / 40 x 40 mm, cutting turning crowns concave / 30 x 30 mm, scraper blade Screen perforation: 15/20 mm Lacquering: Frame in RAL 5010, Tricher in RAL 7016 (HoKuTech standard paint) Connected load: 400 V +/- 5 % / 50 Hz For material: chipboard, MDF/HDF, softwood/hardwood, OSB inclusive: - Control cabinet (Rittal) with 5 m cable - Electrical control (PLC Siemens) - Star triangle run-up - Rubber oscillating elements - E-rotor with knife pockets milled into the profile - Transmission limit switch - 1st row of knives - Hold-down device on the slide for long and large parts - Large 4 ...

Inv. Num. : 8372 Type: ZLSM-4x1.20-3x1.20-0 Producer: Mühlböck Generated: Parameters: Depth: 5400 mm Height: 4200 mm Length: 6520 mm Capacity: 12 x 8 63 m3 (103 68 m3) Load: 100 kg per 1m2 Number of fans: 4 pieces

HSE 5-520KH Firewood splitter with lift table Horizontal splitter Clamping force maximum 5t Cylinder stroke 375 mm Gap length maximum 520mm Fission material diameter: 250mm Flow speed 3.7 cm/s Return speed 6.2 cm/s Electric motor Drive power 230V 50Hz 2.2kW LxWxH 1160 x 425 x 610mm Weight50kg G&STÜ-5981005 Scissor lift table FHT 500 hydraulic mobile Load capacity 500 kg Table dimensions 855x500x50 mm Max. lifting height 900 mm Min. table height 340 mm Handle height 970 mm Foot pedal strokes up to max. height 55 Roller diameter 127 mm Net weight 120 kg G&STÜ-6150500

Weibert TBF-220 Cultivator Tiller, rear tiller, tiller Milling width: approx. 2.2m Milling depth: max. 16 cm (depending on soil conditions) 6 milling blades per flange Milling blade: total 60 Pieces PTO: included RPM: 540 Dimensions assembled: 240x105x95 cm (LxWxH) Rotor shaft drive: Gear drive in oil bath Mount: Three-point hitch Cat. II Weight with packaging: approx. 666 kg Tractor: at least 60 hp Weight: approx. 640 kg G&JAN

Miter punch With table extension With foot lever With table extension Technical features: Double mitres 45º Simple mitres 90° Maximum cutting height 160 mm Maximum cutting width 110 mm Weight approx. 50 kg

Weibert SFK/30-2600 Saw-milling machine Trimming length 2600mm Suction nozzle diameter 100mm Saw blade diameter 315mm Saw blade inclination 90 -45° Max. cutting height 90° 100mm; 45° 80mm 3kW 400V 50Hz Spindle mandrel diameter 30mm Spindle speeds: 1800/3000/6000/9000min⁻¹ Weight approx. 425kg G&STÜ-5945326

Weibert SFK 254/30-1300 Saw-milling machine LxWxH 2200 x 1330 x 1300mm Suction nozzle diameter milling machine 100mm Suction nozzle diameter saw blade protector 30mm 400V 50Hz 2.2/1.5kW Format sliding carriage length 1300mm Format sliding carriage width 238mm Table length 920mm Table width 810mm Spindle height adjustment 110mm Spindle mandrel diameter 30mm Working length of spindle 105mm Spindle speeds: 1400/4000/6000/9000min⁻¹ Circular Saw Unit Trimming length 1300mm Saw blade inclination 45 – 90° Max. cutting height 90° 78mm; 45° 63mm Weight approx. 211kg G&STÜ-5945314

HSE 5-520KH Firewood splitter Horizontal splitter Clamping force maximum 5t Cylinder stroke 375 mm Gap length maximum 520mm Fission material diameter: 250mm Flow speed 3.7 cm/s Return speed 6.2 cm/s Electric motor Drive power 230V 50Hz 2.2kW LxWxH 1160 x 425 x 610mm Weight50kg G&STÜ-5981005

Dry Extraction Wall Spänex TAW compact 215 Paint mist extraction wall with dry separator Complete supply air system Hot water heating coil Spray chamber control with touchscreen 2 x 2.0 kW drive power 6000 m³/h volume flow Year of construction: 2011 From joinery liquidation / retirement in GOOD - CONDITION from the carpentry workshop

LECAB automatic stacking line, Consisting of:, - Outfeed system, - Cross chain transport, - Automatic stacker with 6 stacking sticks units, - Cross chain transport for outfeed, - Roller conveyor for wood packages

KALLFASS outfeed and stacking line FS, Manufacture year 2012, - Roller conveyor with cross transport, - Adjustable stop, - Alignment conveyor, - Cross chain conveyor with layer formation, - Stacking system with stick cassettes, - Lifting table with chain conveyor, - Chain conveyor for wood packages, The line is in excellent condition

JONAB automation for planing line, Consisting of:, - Tilt hoist, - Cross chain with transport belt, - Cross chain with separation, - Infeed roller conveyor

I.T.E.C GmbH Cold circular saw Find more here - / Contact us at -

HSE 22-1100 Cleaver Maximum clamping force 23.4t Cylinder stroke 880 mm Gap length maximum 1100mm Split material diameter: 350mm Flow speed 4.3 - 10.5 cm/s Return speed 7.5 cm/s Electric motor Drive power 400V 50Hz 5.1kW LxWxH 1050 x 1550 x 2500mm Weight 297kg G&STÜ-5981022

HSE 14-1100 Cleaver Clamping force maximum 14t Cylinder stroke 850mm Gap length maximum 1040mm Fission material diameter: 300mm Flow speed 4.2 - 21.8 cm/s Return speed 5.2 cm/s Electric motor Drive power 400V 50Hz 3.5kW LxWxH 1440 x 1350 x 2280mm Weight 185kg G&STÜ-5981014

COMPOSITION: Surface planing machine: Table width: 350 mm 3-Knife Roller -------- Thickness planing machine: Machinable height: max. 240 mm Machinable width: max. 350 mm -------- Spindle milling machine: Spindle: Ø 35 mm -------- Circular saw: Length of the slide: 1100 mm Saw blade: Ø 300 mm -------- Mortising machine: Device

Sawing, milling, drilling and dowel inserting machine Koch type SFBD-B Universal + BL25 Specifications: Machine working :d the top side in continuous with additional: 4 drilling supports vertically from above 4 drilling supports: horizontal from the back Aggregates: tiltable Workpiece length (mm): 330 - 2500 Workpiece width (mm): 40 - 180 (200 mm for straight cut) Workpiece thickness (mm): 15 - 80 mm Dowel (mm): 8 + 10 + 12 x 30 + 40 + 50 Dowel extension (mm): 10 - 25  Machine dimension: Length (mm): 8040 Width (mm): 5850 Height (mm): 2500

Manufacturer:Weinig Model: Powermat 500 Year of Manufacture: 2009 Type of Machine: Planer with automatic return. Likely Use: Wood processing, particularly profiling and planing of wood components. Find more here - / Contact us at -

Horizontal chipper Horacle / machine no.: H2156/62HO - Feed width: 620mm - Max. feed height: 140mm - Vibrating trough length: 5m - Power: 28 kW - Rated voltage: 400V - Rated current: 55A - Control voltage: 230V - Fuse : 63A - Frequency: 50Hz

Consisting of: Finger jointing shaper ProfiJoint, manual transfer station and one-channel press Infeed lenght 150-700 mm Timber width 40-150 mm timber thickness 20-50 mm