subcategories
(3rd category level)
Manufacturer:
(Category: 109)
This 3-axis Sodick AG40L LN2 was manufactured in 2015. It features an X-axis travel of 400 mm, Y-axis travel of 300 mm, and Z-axis travel of 270 mm. The machine has been operated for 13,161 hours and is currently connected and available for inspection/testing. If you are looking to get high-quality die-sinking capabilities, consider the Sodick AG40L LN2 machine we have for sale. Contact us for further details.
Specificaties: 4 rollen Plaatbreedte: 3600 mm Diameter: 4000 mm Diameter van de bovenrol: 1500 mm Diameter van de zijrollen: 1100 mm Diameter van de onderste middenrol: 1450 mm 7000 ton Maximale dikte: 200 / 270 mm Maximale druk op de bovenste rol: 7300 ton Rolmateriaal 60CrMoV12.5 Hydraulische rotatieaandrijving Software: Beckhoff Besturing: Swiss Bend-IT Technology V.3.4.0 Luchtverbruik: 4 bar / 35 m³/u Afmetingen: 15000 x 7200 x 7890 Gewicht 750 ton IN TOPCONDITIENumber of rolls: 4 Roll capacity cold: 220 mm Roll capacity warm: 270 mm Type: VRM Hy 36-4712 Roll dia upside: 1500 mm Dia under roll - side rolls: 1450 / 1100 mm Driven rolls: Centre top and bottom rolls driven Power needed: 850 kW Length: 15 000 mm Depth: 7200 mm Hight: 7890 mm Weight: 750 ton
Total of 6 pieces H7 (23; 34; 42; 62; 70; 80mm), unused, different versions, further details see photos
: 12 St.: ca. 90 kg: ca. 710x720x1000 mmdrawer measurements: 600 x 600 mmColour: 7035/5012 RALCabinet including assortment of dividersLarge drawer usable space Full extension drawers (VA) 100%8 drawers with internal height 40 mm2 drawers with internal height 70 mm,2 drawers with internal height 95 mm, 7 drawers with tray dividers and boxes3 drawers with rail dividers2 drawers with foam insertsBall bearing drawer runnersIndividual pull-out stopIndividual locking possible for each drawerCabinet without key!Translated with DeepL.com (free version)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
High-quality pneumatic riveter, designed for use with blind rivets ranging in diameter from 2.4 mm to 4.8 mm. Allows you to make durable joints with aluminum, stainless steel, steel and copper rivets. Auction-ID: A7-50066-64
The electronic digital tire pressure gauge is a modern device that allows you to quickly and accurately check your car's tire pressure. Auction-ID: A7-50066-39
Tool holder, reamer, tool holder, machine reamers, reamer, reaming tool, dowel cutter set, milling holder, milling tool, boring head, spindle tool, reducing sleeves, tool holder -Mounting bracket: Mount: MK4 6 pieces -Type: Cone Ø 22/20 mm 3 pieces / Ø 19/17 mm 3 pieces -Price/Fee: complete -Transport dimensions: 315/220/H40 mm -Weight: 7.7 kg
Thread cutting head with Strehler jaws, thread cutting die, thread cutting machine, pipe thread cutting -Manufacturer: Alrowa, thread cutting head with Strehler jaws -Type: No6 -inch thread: 1 1/2 - 3 -Accessories: incl. 3 sets of Strehler jaws, see photos -Dimensions: 950/200/H150 mm -Weight: 15.7 kg
Thread cutting head with Strehler jaws, thread cutting die, thread cutting machine, pipe thread cutting -Manufacturer: Alrowa, thread cutting head with Strehler jaws -Type: No23 -inch thread: 1/4 - 1 1/2 -Dimensions: 730/150/H125 mm -Weight: 8.0 kg
Tool holder, reamer, tool holder, machine reamers, reamer, reaming tool, dowel cutter set, milling holder, milling tool, boring head, spindle tool, reducing sleeves, tool holder -Mounting bracket: Mount: MK3 3 pieces -Type: Cone Ø 16/14 mm 2 pieces / Ø 13/11 mm 1 piece -Price/Fee: complete -Transport dimensions: 265/85/H27 mm -Weight: 1.8 kg
Tool holder, milling holder, milling tool, boring head, spindle tool, reducing sleeves, mounting bracket -Milling chuck: MK4 chuck -Shaft: Ø 22 mm -Shaft length: 320 mm -Dimensions: Ø 40 x 490 mm -Weight: 2.8 kg
Boring head, spindle head, drill head, plunge drill head, plunge head, spindle drill head, boring head, spindle tool, facing and boring head -Borling head: MK3 mount -Size: Ø 74 mm -Guide pin: Ø 45 m -Dimensions: Ø 74 x 237 mm -Weight: 4.2 kg
Tool holder, reamer, tool holder, machine reamers, reamer, reaming tool, dowel cutter set, milling holder, milling tool, boring head, spindle tool, reducing sleeves, tool holder -Mounting bracket: Mount: MK5 4 pieces -Type: Cone Ø 40/37 mm 2 pieces / Ø 32/29 mm / Ø 27/25 mm -Price/Fee: complete -Transport dimensions: 420/230/H65 mm -Weight: 15 kg
AEROCAP 1001 – mobile low-pressure sandblasting machine for wood, metal and stone. The AEROCAP 1001 is suitable for extensive renovation work, restoration and recurring blasting work. The 17-litre abrasive tank allows longer work phases with fewer interruptions for refilling. The automatic start & stop system allows the blasting process to be started and stopped directly on the blasting lance. The previously selected settings are retained. Typical areas of application: Paint stripping and cleaning of wood Beams, trusses, doors and stairs Metal parts and vehicle parts Stone, brick and mineral surfaces Restoration and renovation work Technical features: Abrasive container: 17 litres 6m blast hose Automatic start & stop system Integrated dehumidifier Maximum operating pressure: 8 bar Various nozzle sizes available made and assembled in France ...
TECHNICAL SPECIFICATIONS – BASIC UNITSystem footprint: 12.3 sq m Length: 3.5 m Width: 3.5 m Height: 3.0 m Total weight including dielectric fluid: 6,500 kg Connected load (45/90 A generator): approx. 6 / 9 kVA Supply voltage: 380 V Connection: RST/MP/S Fuse rating (45/90 A generator): 25 / 35 A Operating current corresponding to the generator: 45 / 90 AWORKPIECE AND ELECTRODEPermissible workpiece dimensions: 900 × 900 mm Workpiece clamping surface: 900 × 900 mm Max. table load: 1,000 kg Max. electrode weight with pneumatic clamp: 100 kg Max. electrode weight directly on the quill: 250 kg Min. distance table – electrode holder: 220 mm Max. distance table – electrode holder: 620 mmWORKING TANKMirror height from table: 450 mm Internal width: 900 mm Internal length: 900 mm Max. capacity: 415 lCLAMPING PLATELength: 900 mm Width: 900 mm Threaded hole size: M10 Threaded hole spacing: 12 ...
serial number: 813 stroke: 160 mmautomatic feeds: ja cross-moving table: 2-Achsen weight of the machine ca.: 1,2 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 3000 mmtable width: 1500 mmburner heads: 1 Control: CNC workpiece weight: 1500 kgtraversing speed: 200 m/mintotal power requirement: 55 kWdimensions of the machine ca.: 10050 x 4920 x 2200 mmCUTTING CAPACITY:STRUCTURAL STEEL 40 mmSTAINLESS STEEL 40 mmALUMINUM 40 mmBRASS 16 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
FARO Titanium Arm 7-Axis 3D Coordinate Measuring Arm Portable 3D coordinate measuring arm (CMM) from the FARO brand from the proven Titanium series. The device is characterized by high flexibility and precision directly in production or quality assurance. It was developed by FARO Technologies to perform precise, tactile measurements directly in manufacturing environments or for quality control. Key Features & Technical Details Technology: Manual, articulated measuring arm with internal encoders for precise detection of points in space. Areas of application: Ideal for initial sample inspections, component comparisons against CAD data and the measurement of sheet metal components and fixtures. Combination of mobile measuring arm (FARO Titanium) and welded assemblies 1. Initial situation and system advantages The integration of the Titanium FaroArm® into ...
Wenzel RS 1012 CNC 3D Coordinate Measuring Machine The Wenzel RS 1012 is a CNC 3D coordinate measuring machine (CMM) in horizontal arm design, which is designed for the precise measurement of medium- to large-volume workpieces such as components and assemblies. The machine concept is based on a stable cast iron or granite base plate as a measuring table with a side-mounted guide system, which enables open loading from three sides. Technical Core Components & Specifications Machine Type: Horizontal Arm 3D Coordinate Measuring Machine (CMM) Manufacturer: WENZEL Präzision GmbH Model / Year of manufacture: RS 1012 / 2002 Serial Number: 023116 Measuring volume (X/Y/Z): 2,000 mm × 1,000 mm × 1,200 mm Probing system: Renishaw PHC10-3 PLUS (interface/control for motorized rotary/swivel head PH10) Design: Horizontal arm measuring device (column measuring machine) with integrated ...
Steinheil KONTUR 408-2/D optoelectronic contour and shaft measuring system High-precision optoelectronic contour and shaft measuring system Steinheil KONTUR 408-2/D with high-quality Jenoptik optics The system is used for contactless, high-precision and fast measurement of rotationally symmetrical components (e.g. shafts, camshafts, turned parts) The device scans the measuring object without contact according to the shadow image principle. Rotational measurements are recorded with up to 1440 measuring points on the circumference per measuring point. The evaluation and quality control is carried out directly via an integrated SPC software (Statistical Process Control) based on Windows NT with clear tolerance bars and diagrams The system is housed in a closed aluminium profile housing with a transparent protective structure and is protected by professional safety light curtains ...
used
WMW BK 50 AIAdmission in drilling-spindle (morse): Mk5 Max drill capacity: 50 mm Table dimensions: 490 x 530 mm SPEEDS: 45 > 1000 rpm Max drilling depth: 280 mm Motorpower: 7 kW Length: 1200 mm Depth : 770 mm Height: 2700 mm Weight: 1,7 ton
90° round: 340 mm 90° rectangular: 700 x 340 mm 45° right: 400 x 340 mm 45° left: 400 x 340 mmDepth of throat: 700 mm Max height of workpiece: 340 mm Sawspeed: 17 > 120 m/min Length of band saw: 5800 x 38 x 1,3 mm Power needed: 4 kW Length : 3250 mm Depth : 1700 mm Height: 1850 mm Weight: 2300 kg
This 3-axis CHARMILLES ROBOFIL 240 CC was manufactured in 2003. It has a machine weight of 2100 kg and operates on a voltage of 400 V with a current of 18 A. If you are looking to get high-quality wire EDM capabilities, consider the CHARMILLES ROBOFIL 240 CC machine we have for sale. Contact us for further details.
This 3-axis CHARMILLES Roboform 35 was manufactured in 2004. It features an X travel of 350 mm, Y travel of 250 mm, and Z travel of 300 mm. The machine has a table size of 500 × 400 mm and can accommodate workpieces weighing up to 500 kg. If you are looking to get high-quality die-sinking capabilities, consider the CHARMILLES Roboform 35 machine we have for sale. Contact us for further details.
57 € 
