subcategories
(3rd category level)
Manufacturer:
(Category: 109)
Manufacturer: Hans Schoen Model: NH 160 Year of Manufacture: 1988 rebuilt in 2016 The press is being sold without tools or spare parts. Technical Data Press force max.: 1,600 kN Main drive power: 30 kW Speeds Rapid advance from: 300 mm/sec Pressing speed: 18 mm/sec Rapid return: 300 mm/sec Strokes Max. stroke: 150 mm Max. daylight opening: 450 mm Table and Ram Dimensions Ram area: 730 × 560 mm Table area: 650 × 650 mm Openings Front vertical opening: 750 mm Side vertical opening: 250 mm Heights Table height above floor: 850 mm Table bore diameter: 150 mm Ram bore, Ø H7: 60 mm T-slots T-slots in table, DIN 650 H12 diagonal: 22 mm T-slots in ram, DIN 650 H12: 22 mm Two pieces, front to back Machine Dimensions Machine footprint approx.: 1,850 × 1,500 mm Machine height approx.: 2,850 mm Find more here - .ucymachines/ Contact us at - sales@ucymachines
table length: 2400 mmtable width: 1200 mmtable height: 850 mmVertikal stroke: 50 mmweight of the machine ca.: 0,99 tWelding table with accessories:- Table size: 2400x1200x200 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Bore Ø 28 mm- Surface bores 100x100 mm grid- Corners, edges and bores chamfered at 45°- Side wall height 200 mm- Side wall bores in diagonal grid- Construction reinforced with ribsAccessories:- 6x 280610.N screw clamp- 12x 280511 quick-release bolts- 8x 280420.N universal stop- 2x 280110.N stop and clamping angle- 2x 280162.N stop and clamping angle- 1x 283999 care setThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: Pinacho Model: Smart Turn 6/180 Power: 7.5 kW Frequency: 50 Hz Control: FANUC CAPACITY • Center height: 180 mm • Center width: 750–1000 mm • Permissible diameter over bed: 360 mm • Permissible diameter over longitudinal slide: 335 mm • Permissible diameter over cross slide: 198 mm • Bed width: 250 mm SPINDLE • Spindle bore: 42 mm • Spindle nose: CAMLOCK no. 5 (DIN 55027 no. 5) • Spindle taper: Morse taper no. 4 • Number of spindle speeds: 1 • Cutting speed (constant surface speed): 0–4000 U/min FEED • Working feed Z,X (mm/min): 0–10000 mm/min • Rapid traverse Z,X (m/min): 10 m/min TAILSTOCK • Tailstock quill diameter: 58 mm • Tailstock quill travel: 200 mm • Tailstock taper: Morse taper no. 3 MOTORS • Main motor power: 5.5 kW • Feed force longitudinal (N): 4500 N • Feed force cross (N): 3500 N • Cool ...
max. wheel diameter: 600 mmgear width: 450 , 600 mmmodule: distance gear spindle / pinion head: 40 - 450 mmdistance pinion spindel head / gear head: -160 - 600 mmaxis adjustment +/-: 60 mmspindle turning speed - stepless: 1 - 2120 U/minspindle bore: 130 mmtaper in main spindle: MK 60 total power requirement: 30 kWweight of the machine ca.: 6,6 tdimensions of the machine ca.: 2,8 x 1,8 x 2,1 mBevel gear testing machine, 2 flank testing! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Vibratory Finishing Bowl ROTO-FINISH ST20M4H Capacity: 200 L Bowl dimensions: Ø 1200 mm Inside dimensions: Width 230 mm Useful depth: 250 mm With automatic conveyor exit sBowl reconditioned in 2010 Coating in very good condition (see photos) Electrical panel in very good condition Voltage: 220 V Tri Dimensions (L x W x H): 1500 x 1800 x 1500 mm Weight: approx 1 T
Inv. Num. : 8801 Type:- Producer: Barnesdril Generated: Parameters: including table
FOBA Vario RPD50 VS1109/048 - Windows XP English / German - 1.4GHz 512MB RAM - Fobagraf 441-01 - EMC / IMP camera - New IMP LED's - Radiator type P313 - 2013 – new filters - HF 40W - PK used, year of construction 2011, 1.3MB, 10.5 W under the lens - 420 lens, deflection unit Raylase SS 10 - Z - 170mm and X axis 300mm - Turntables in pendulum mode, - Start via footswitch, possible via light curtain - Internal / FOBA PLC - Bulkhead = max. component height 150mm - Completely cleaned / serviced 19% VAT is shown, EXW, Commissioning, instruction, training possible on request
A vertical internal broaching machine (broaching tower) Karl Klink with lift table and loading portal is available. Broaching force: 63kN, broaching stroke: 1000mm, spindle stroke: 400mm, broaching speed: 7.5m/min, return speed: 24m/min, stations: 1, table width: 500mm. Machine dimensions X/Y/Z: approx. 3700mm/3000mm/3200mm, weight: approx. 3500kg. Documentation available. An on-site inspection is possible.
Cycle time: approx. 31s, machine dimensions X/Y/Z: approx. 2200mm/2400mm/2300mm, weight: approx. 1500kg, control: Siemens. An on-site inspection is possible.
table length: Rohmateriallänge 6500 mmtable width: Rohrdurchmesser max. 230 mmburner heads: 1 Control: CNC workpiece weight: 300 kgtraversing speed: 91 m/minweight: 5750 kgdimensions of the machine ca.: 12900 x 2370 x 2650 mmTube laser with T-loaderConfiguration1. Bodor Power laser source 6 KW2. Bodor Genius laser cutting head with autofocus3. Bodor Thinker 3.0 control system4. Pneumatic chuck5. Adaptive adjustment of jaw clamping force6. Follow-up servo blanking clamp7. Support for composite clamping rollers8. Active collision avoidance9. Automatic tube inspection10. Automatic tube edge detection and positioning11. Automatic adjustment of cutting gas12. Laser cutting process database13. Air-saving continuous jet nozzle14. Intelligent maintenance reminder15. WIFI internet connection16. Water cooler17. Extraction system18. Wear parts set19. Auxiliary feeding device T-Loader:- One-click a ...
Manufacturer: EXNER Model: PG 80 Year of Manufacture: 2014 The EXNER PG 80 is a four-column hydraulic tool testing press for testing stamping, forming, embossing, and drawing tools. It is designed for high precision and durability, with modern proportional hydraulic control and digital force display for tool setup and testing. Technical Data Press Ram - Number of press cylinders: 2 pcs - Nominal force (adjustable): 2 × 400 kN - Return force: 2 × 150 kN - Stroke: 350 mm - Ram width: 2100 mm - Ram depth: 840 mm - Guide length: 750 mm - Ram speed under load (100%): approx. 0–10 mm/s - Ram return speed: approx. 0–20 mm/s - T-slots (DIN 650): 18 mm - T-slot pitch: 150 mm Installation Space - Installation height (top to bottom): 550 mm - Table width: 2100 mm - Table depth: 840 mm - Table T-slots (DIN 650): 18 mm - T-slot pitch: 90 mm - Table passage (W×D): 1300 × 120 mm (to be ...
CNC portal machining center Type: FVP 50 CNC Manufacturer: TYC Year: 2006 Control: Heidenhain X: 1400 mm Y: 200 mm Z: 600 mm Max spindle speed: 15000 rpm Tool holder: ISO 40 Table: 1600 × 1000 mm Max workpiece weight: 4000 kg Passage between columns: 1250 mm Shut hight table-crossbar: 700 mm Machine weight: 9500 kg In good condition, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines
Manufacturer: SATO Model: DHDS 3100 Year of Manufacture: 2017 Estimated operating hours: 16,000 hours - Plasma cutting system with table and extraction system. - Cutting area: 2 x 6 meters. - Equipped with plasma unit and 2 oxy-fuel torches. Find more here - .ucymachines/ Contact us at - sales@ucymachines
Manufacturer: Amada Model: LST 3015-M2 Year of Manufacture: 2011 Power Required: 4 kVA Noise Level: 70 dB(A) Weight: 1950 kg Operating Hours: 30,000 hours Pallet Capacity: - Maximum sheet size: 3050 x 1525 x 25 mm - Maximum load: 920 kg Amada 4 kW laser cutting system including shuttle table and extraction system. Operated in single-shift production, no maintenance backlog. Find more here - .ucymachines/ Contact us at - sales@ucymachines
Manufacturer: MECAL Model: MC304 Year of Manufacture: 2013 Type: ATLAS Type of Machine : 4-axis machining center Find more here - .ucymachines/ Contact us at - sales@ucymachines
A flat steel bending machine for the production of ZB frames is available. Pneumatic pressure: 8bar, hydraulic pressure: 100bar, weight: approx. 5000kg. An on-site inspection is possible.
Dimensions (L/W/H): 1950x690x1700 mmWeight: 426 kgTotal power requirement: 5,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 2230x720x280 mmWeight: 135 kgTotal power requirement: 0 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
diameter - cutter special: 30 mmdraw-in arbor diameter: 40 mmclamping height: 310 mmcircle diameter: 80-300 mmweight: 30 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1950x690x1700 mmWeight: 431 kgTotal power requirement: 7,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 6400x1500x1780 mmTotal power requirement: 19 kWWeight: 1800 kgControl: Arbeits- und Platzersparnis, sicherer Betrieb.Kombinierbar mit einer Hochgeschwindigkeits-Vierseitenfräse zu einer effizienten, automatischen Produktionslinie.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
upper amp; lower Wila tooling 5 axes: X / X´ / R / Z1 / Z2Capacity: 50 ton x 2550 mm Backgauge: CNC Control: TS3 Passage between uprights: 2550 mm Max stroke: 265 mm Max distance between table -- ram: 515 mm Locking speed: 90 mm/sec Working speed: 20 mm/sec Returning speed: 90 mm/sec Electric motor (power): 9 kW Length: 3400 mm Depth: 1850 mm Height: 2820 mm Weight: 5 ton
Table 6000 x 3000 x 400 mmThickness: 400 mm Length: 6000 mm Large: 3000 mm Weight: 22 ton
table length: 175 mmtable width: 110 mmgrinding wheel diameter: 500 mmtotal power requirement: 1 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
