Manufacturer:
(Category: 102)
Spindle bore: 42mm, max. workpiece diameter: 115mm, speed: 3150rpm, power: 9kW, bar length: 5200mm. Machine dimensions X/Y: approx. 2100mm/1000mm, weight: approx. 1500kg. Including bar feeder Stamag D 5000 and various accessories such as collets and feed collets. Documentation available. An on site inspection is possible.
A mint-condition 2-axis precision lathe Knuth is available. Turning diameter over bed/support/without bridge: 800mm/570mm/1035mm, max. workpiece length: 1500mm, bed width: 400mm, travel X/Y: 420mm/230mm, top slide swivel range: 70°, speed: 1600rpm, spindle bore: 105mm, rapid traverse X/Z: 2m/4m/min, quill diameter: 90mm, quill stroke: 235mm. Machine dimensions X/Y/Z: approx. 3250mm/1150mm/1950mm, weight: approx. 3300kg. Documentation available. An on-site inspection is possible.
Center height: 230mm, center width: 1500mm, swing diameter over bed/cross slide: 475mm/260mm, max. workpiece weight: approx. 500kg, spindle diameter: 1000mm, spindle bore: 62.5mm, max. chuck diameter: 250mm, travel X/Z: 1330mm/280mm, rapid traverse X/Z: 8m/4m/min, speed: 3150rpm. Machine dimensions X/Y/Z: approx. 3400mm/2000mm/1600mm, weight: approx. 3300kg, control: Bosch CC 200T. Documentation vorhanden. An inspection on site is possible.
turning diameter: 280 mmturning length: 960 mmcontrol: MORI SEIKI MSX -501 III total power requirement: kWweight of the machine ca.: 13,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 800 mmswing diameter: 1050 mmturning height: 755 mmcontrol: Siemens 840D travel -x axis: 625 / 80 mmtravel -z axis: 630 mmworkpiece height max.: 720 mmmax. workpiece weight: 2500 kgShank diameter: 40 x 40 mmtransmission ratio 1: 4 - 100 U/mintransmission ratio 2: 16 - 400 U/mindrive capacity - spindle motor: 40 kWrapid traverse: 8 m/minturning speed range - milling: 1 = 8,5 - 350 U/min: 2 = 26 - 1070 U/min: 3 = 80 - 3312 U/mintotal power requirement: 53 kWweight of the machine ca.: 16 tdimensions of the machine ca.: 4,9 x 4,4 x 4,5 mequipped with:- CNC control Siemens 840D- C-axis- tool changer 12-fold (driven tools)- complete enclosure- chip conveyor- coolant systemonly approx. 800h running hours per yearThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle passage: 375 mmturning diameter over bed: 1030 mmturning length: 1750 mmspindle bore: 375 mmmax. turning diameter: 650 mmspindle turning speed range: 5- 500 U/minspindle motor: 45 / 37 kWControl: OSP P300 L x-travel: +330 / -140 mmz-travel: 2040 mmrapid traverse x + z axis: 5 / 10 m/mintail stock: tailstock quill diameter: 180 mmtailstock quill stroke: 200 mmtaper in tailstock MT: MT 6 total power requirement: kWweight of the machine ca.: ca 23 tdimensions of the machine ca.: 7,1 x 3,2 x 2,85 mCnc Oil Country LatheCNC-controlled oilfield latheFor heavy-duty machining of large and heavy turned parts andpipe end machining- CNC Control OSP P300L- Front and Rear CHUCK: SMW Autoblok 3 - jaw Chucks (both 850mm dia.)- Tool Revolver 12-fold (static Tools)- Chip Conveyor- ExhausterPower on: 20.538h , N/C Running Time: 2.270hSpindle Revolution Time: 2.287h, Cutting Time: 1.691hThe data ...
turning diameter over bed: 460 mmturning diameter over slide rest: 280 mmturning length: 1000 mmcentre height: 230 mm: 720 mmspindle bore: 53 mmspindle turning speed range: 28 - 1250 U/mintotal power requirement: 4,0 kWweight of the machine ca.: 1,8 tdimensions of the machine ca.: 2,4 x 1,4 x 1,75 mmLathes with:- Digital display- Quick-release tool post- 3-jaw chucks (200 mm and 160 mm)- Chip tray- Centering centerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
TOS Galanta SUIL 40A – Lead and Pull Spindle Lathe For sale is a well-preserved and mechanically overhauled 2009 TOS Galanta SUIL 40A lead and pull spindle lathe, built in 1998. Specifications Manufacturer: TOS Model: Galanta SUIL 40A Machine number: 0219 Year of manufacture: 1998 (mechanically overhauled 2009) Dimensions: approx. 2.2 m × 1.1 m × 1.75 m Weight: 1620 kg Main drive: 5.5 kW Spindle speed (max.): 3150 rpm Spindle bore: 50.2 mm Center spacing: 1000 mm Center height: 200 mm Turning diameter over bed: 400 mm Condition: ready for use (used) Accessories Three-jaw chuck Tailstock Lunette Coolant Setup Interchangeable Wheel Set Operating instructions (German) The machine is fully functional. Viewing possible by appointment
turning diameter: --- mmturning length: --- mmcontrol: --- total power requirement: --- kWweight of the machine ca.: --- tdimensions of the machine ca.: --- mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CNC lathe GILDEMEISTER CTX 420 linear With Siemens 840 D powerline controller Year of Make: 2006 Max. rotatable diameter: 324 mm Max. rotatable length: 600 mm Max. circumferential diameter: 680 mm Spindle bore: 79 mm Max. spindle speed: 4500 rpm With the following accessories: Slide protection with interior lighting 12-speed turret with 12 driven stations Y axis , C axis Tool measuring device Parts collection facility 3 jaw chuck hydraulic 0 210 mm with foot switch Hydraulic Collet Chuck Hainbuch IRCO Breuning RBK 10012 Bar Feeder Signal lamp Tailstock with quill Conveyor Oil mist extraction Coolant system with IKZ and belt filter system Operating instructions
Key data: 340 mm, 1000 mm
Machine Type: CNC Lathe Manufacturer: Okuma Type: LU15-M Year of Make: 2000 Control: OSP-U100L Country of origin: Japan Delivery time: in stock Long turning length-1000 mm Towable Tailstock – Automatic G152 Partial hollow clamping device The lathe is in very good condition. The basic and additional equipment makes it possible to process long turning lengths of up to 1000 mm with this used machine. Effective productions continue to be achieved thanks to the towable tailstock – automatic, the tool breakage/wear control, the partial hollow clamping device, the K-pump and the dialogue programming (IGF). An optimal machine for economical and reliable production. The machine is user-friendly and can be integrated into production immediately. Machinery Spindle motor VAC built 22/15 kW Long turning length – 1000 mm towable tailstock – automatic G152 3-jaw chuck Forka ...
Control: OSP-P300 Max. turning length: 950 mm Max. turning diameter: 340 mm max. turning Ø over slide: 380 mm max. turning Ø over bed: 580 mm Max. speed: 4,200 rpm Tool holder: BMT 2 Tool Turrets A-turret: 12 tool positions (all driven) B-turret: 8 tool positions Tailstock Conveyor Hydraulic Power Chuck B210/A8 Touchsetter High Pressure Coolant Pump Enlarged water tank
Key data: 660 mm, 983 mm
CONTROL PANEL FANUC F31-IA5 AXIS MOVEMENT X 750 MM / Y ± 210 MM / MM / Z 1.220 MM ROTARY AXIS MOVEMENT B + / - 120 ° / C 360 °/ 0.001 ° MAX. TURNING DIAMETER 660 MM MAX. TURNING LENGTH 983 MM SPINDLE - 1 CHUCK SPİNDLE SPEED 3.000 MIN/-1 CHUCK DIAMETER 12 INC / 315 MM BAR CAPACITY 90 MM TOOL SPINDLE SPEED ( S1 ) 12.000 MIN/-1 TOOL HOLDERS CAPTO C6 NUMBER OF TOOL POSITION 100 SPINDLE - 2 SPİNDLE SPEED RANGE SUP SPİNDLE 3.000 MIN/-1 CHUCK DIAMATER SUP SPINDLE 12 INC / 315 MM WEIGHT OF THE MACHINE 22.300 KG DIMENSIONS OF THE MACHINE 5.33 X 3.27 X 2.93 M
faceplate diameter: 6300 mmswing diameter: 7000 mmturning height: mmram adjustment: mmcross rail adjustment - vertical: mmram head - cross travel: mmram swivable +/-: °main drive: kWtable revolutions:: 0 - 14 U/mnworkpiece weight: 75 /125 tram head dimension: mmtotal power requirement: 170 kWweight of the machine ca.: 120 tdimensions of the machine ca.: 10 x 10 x 7 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: max. 356 mmturning length: 705 mmcontrol: M730 UM Mapps CELOSgreates pass round over bed: 920 mmSwing dia. over traverse guideway: 742 mmMain spindle:: turning speed range - main spindle: 4.000 min/-1power capacity - main spindel: 18,5 / 15 kWspindle nose: JIS A2-8 spindle bore: 80 (91) mmC-Axis: 0,001 °Subspindel:: Spindle speed range subspindle: 6.000 min/-1power capacity - Sub spindle: 11 / 7,5 kWspindle bore: 43 mmC-Axis: 0,001 °axis stroke:: x-travel: 260 mmz-travel: 795 mmY - Axis: +/-50 mmrapid traverse ( X / Y / Z ): 30 / 10 / 30 m/minturret:: number of toolpositions: 12 pos.Schank height for square tool: 25 mmDrill shank diameter: 50 mmturret change time: 0,27 sec.Driven Tool Positions:: Spindle speed - driven tools: max. 10.000 min -1power capacity - driven tools: 5,5 / 4,2 kWtotal power requirement: 41 kVAweight of the machine ca.: 6,4 tdimensions of t ...
Universal CNC lathe INDEX G 400 RATIO Line Hersteller [manufacturer]: INDEX Type [ type]: G 400 Control unit: Siemens C200-4D incl. milling of cylindrical tracks Incl. handwheel Baujahr[construction year]: 10/2004 Turning length 1250 Main spindle D102 with swing-in gear 1700 Nm Size 11 Hollow Clamping Cylinder 102 ARB-SPI ALIGNMENT. AND SWITCHING DEVICE TOOL CARRIER 1 COMPL. AXES X,Y,Z,B with turning/milling operation Disc turret VDI40 10 stations MILLING SPINDLE HSK A63 Tool carrier axles 2 XZ Disc turret VDI40 10 stations SUB-SPINDLE D102 DIRECT DRIVE 1300Nm Size 11 Hollow Clamping Cylinder 102 ARB-SPI ALIGNMENT. AND SWITCHING DEVICE DISC MAGAZINE ON THE LEFT OF THE HSK63 SINGLE-SWING GEARBOX WITH 32 TOOL HOLDERS DISC MAGAZINE RIGHT COMPL. M.32 TOOL HOLDERS HSK 63A Travel path: X= 320mm Z=1250mm Displacement measuring system X-axis glass mast. (abs) Fe ...
6-spindle bar automatic, Gildemeister GMC 25ISM, - swarf conveyor, - fire figthing system, auto bar loder, Iemca SIR 25 F, Control: Siemens 840D, Automatic bar loader: Iemca SIR 25 F (bundle), ignition hours: 41.747, working hours: 37.318
Key data: 440 mm, 350 mm
Gildemeister CTX-200 - CNC Lathe - Gildemeister/DMG CNC control - 3-jaw lathe chuck Ø 140 mm - 12-cavity tool turret with driven tools - Work area lighting -Conveyor - 10810 Hours - Year of construction 1995 Specifications Workspace: - Circulating Ø over bed track cover: 440 mm - Circumferential Ø over plan guide cover: 210 mm - Plan travel: 160 mm - Longitudinal travel: 350 mm Fulcrum shaft: - Spindle head Ø: 120 mm h5 - Spindle head Ø in the front bearing: 85 mm - Spindle bore: 56 mm - Chuck Ø: 140 mm Main Drive: - Drive power 100/50% ED: 7.5 / 11 kW - Max. torque: 58 / 84 Nm - Speed range: 25 - 5000 rpm Feed drive: - X-feed force: 200 daN - Z-feed force: 300 daN - X-rapid traverse: 12 m/min - Z-rapid traverse: 16 m/min - Measuring system: incremental encoder Tool carrier: - Universal Disc Turret: autom. switching with directional logic - Numb ...
Inv. Num. : 8820 Type: MINI-88 Y Producer: POLY GIM Created: 2007 Parameters: Control System: MITSUBISHI Max. turning diameter: 25 mm Maximum length of travel in the X-axis: 165 mm Maximum length of travel in the Y-axis: 148 mm Maximum feed in the Z-axis: 150 mm Maximum spindle speed: 6000 1/min Spindle bore: 34 mm Max. rod diameter: 26 mm Length: 1200 mm Width: 1000 mm Height: 1500 mm Weight: 1058 kg Equipment: Conveyor Y-axis Bar Feeder FEDEK STM-326
Inv. Num. : 8819 Type: KMX SWING 1032 Producer: MANURHIN Created: 2006 Parameters: Control system: FANUC 160i TB Hours: 39563 h Max. rod diameter: 32 mm Maximum turning length: 250 mm Number of axes: 10 pieces Maximum spindle speed: 8000 1/min Spindle bore: 33 mm Length: 3370 mm Width: 1420 mm Height: 1985 mm Weight: 4250 kg Equipment: Conveyor IEMCA BOSS 332 E/32L Bar Feeder
Key data: 820 mm, 3000 mm
Smooth X Control Max. turning diameter: 820 mm Travel: X/Y/Z/Tailstock: 870/500/3,122/2,990 mm B: -30° to +210° (0.0001°) Main spindle Drive power: 30 kW Max. speed: 3,300 rpm Max. torque: 3,100 Nm Spindle nose A2-11 Spy bore: 104 mm Milling spindle Drive power: 37 kW Milling spindle max. speed: 10,000 rpm Tool magazine 40 tool positions Capto C8 Programmable NC tailstock MK5 - Tailstock forward/back via footswitch - Tailstock extension 150 mm Hydraulic bezel, SMW Autoblok type RX5 - Max. clamping range: 430 mm Automatic opening/closing of the clamping jaws Clamping force regulation high/low (via M-code) 3-jaw chuck Schunk 500 mm Cooling with air through the rotating milling spindle Cooling by the spindle 70 bar Mayfran Concep 2000II Coolant System - Double switching filter - 70 bar high-pressure pump - 3 pressure levels - Hinged belt chip conveyor Maz ...
Key data: 650 mm, 1500 mm
Year of construction 2014, commissioning 2017 OSP P300S Controller Travel: X1/X2 axle: 695/235 mm Y-axis: 300 mm Z1/Z2 axle: 1,600/1,461 mm B-axis: -30° to +210° Max. turning diameter: 650 mm Big Bore main spindle 32/22 kW, spindle nose A2-11, max. speed: 3,000 rpm, Max. torque: 955 Nm, bore 112 mm Hollow Clamping Cylinder SMW VNK320-127, Bore 127 mm 3-jaw chuck Forkardt 3QLK 315-88 Z11 Pressure reducing valve 8-70 bar Milling spindle 22 kW, max. speed: 12,000 rpm Tool magazine with 40 tool positions, HSK-A63 Lower turret with 12 tool stations Self-centered bezel on the lower turret Hydraulic bezel SMW SLU-X-3.2-ZS, clamping range: 50-200 mm Programmable tailstock Renishaw RMP Probes Drum trough filter TMF300 with 980 L tank 8 bar circulation pump 70 bar high pressure pump Hinge belt chip conveyor Tool monitoring system for tool life and breakage Tool measur ...
for Schütte SF 32 - bar length 4 m -, Country of origin: Italy, Number of spindles: 6
turning diameter over bed: 370 mmturning diameter over slide rest: 200 mmturning length: 1000 mmcentre height: 185 mmspindle bore: 56 mmtailstock quill taper MT: 4 turning speeds: 50 - 2000 U/minpower capacity: 4,0 kWweight of the machine ca.: 1,4 tdimensions of the machine ca.: 2,3 x 1,1 x 1,3 mCenter lathe200mm three-jaw chuckSize B Multifix tool post3 Multifix tool holdersEmergency stop deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Weiler Commodor – lead and pull spindle lathe (partially overhauled, built approx. 1990) Condition: Partially overhauled, very good general condition Year of construction: approx. 1990 Manufacturer: Weiler Model No.: Commodor Machine Type: Lead and Pull Spindle Lathe Technical data (approx. information): Max. turning diameter over bed: 380 mm Max. turning diameter over support: 190 mm Max. turning length: 1000 mm Bar Passage: 56 mm Speed range: 25 – 2000 rpm Spindle Nose: A2-6 Drive power: 4.0 kW Tailstock: MK4 Automatic longitudinal and flat feeds: 0.011 – 0.80 mm/rev Thread ranges: Metric: 0.3 – 10 mm Inch: 80 – 2 3/4 G/" Diametrically Pitch: 80 – 5.5 Dp Module: 0.2 – 5 Dimensions (L x W x H): 2200 × 1200 × 1800 mm Weight: approx. 1500 kg ⚙️ Equipment & Accessories: 3-Axis Digital Display SINO (New) ...
Manufacturer: Optimum Year of construction: 2024 Condition: as good as new, workshop tested Delivery time: immediately available Specifications Tip height: 165 mm Center width: 830 mm Circumferential diameter over bed: 330 mm Circumferential diameter over face slide: 208 mm Swivel length in the bed bridge: 430 mm Speed ranges: 16 steps, 70–2000 rpm⁻¹ Drive motor: 1.5 kW, 400 V, 50 Hz Spindle holder: Camlock DIN ISO 702-2 No.4 Spindle bore: 38 mm Spindle cone: MK5 Tailstock mount: MK3, quill stroke 110 mm Weight: approx. 512 kg Machine dimensions (LxWxH): 1685 × 745 × 1590 mm Gradients and feed Metric: 0.4-7 mm/rev (26 pitches) Inches: 56-4 Gg/1" (34 pitches) Longitudinal feed: 0.052–1.392 mm/rev (32 feeds) Face feed: 0.014–0.38 mm/rev (32 feeds) Accessories: Fixed bezel (Ø 6–50 mm) Rotating bezel (Ø 8–3 ...
multifix: ja centre distance: 1500 mmdocumentation: ja weight of the machine ca.: 3 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Conventional precision lathe WEILER "CONDOR VC" With 3 axis digital display Siemens Year of Make: 2012 Spindle bore: 56 mm Center width: 800 mm Circumference Ø over bed : 205 mm Speed range: 30 – 3500 rpm With the following accessories: Multifix Tool Holder Chip backsplash wall with interior lighting Coolant Setup 3 jaw chuck 0 200 mm Feed protection Moving Lynette 0 approx. 150 mm Tailstock with extendable drill quill Operating instructions
Innovac GmbH
