Manufacturer:
(Category: 102)
Manufacturer GEMINI Model GHT4-720 x 2,000 Year 2002 FAGOR 8055 CNC Capabilities Max. Ø turning on bed / carriage 720/470 mm. Height of points on flat guide 366 mm. Distance between points 2,000 mm. Fast Forward X/Z Axes 8 m/min Head Nose Head DIN-55027-11 Main shaft hole diameter 104 mm. Head Revolutions 0-1600 No. of Automatic Head Ranges 2 Main Motor Power 17/ 20.5 kW. Maximum torque 1590/1920 Nm Counterpoint Tailstock shank diameter 100 mm Tailstock shaft course 200 mm Morse 6 Tailstock Rod Housing Equipment 4 Post-Automatic Turret. Full Rear Protection INCLUDED Universal 3 Claws Plate INCLUDED Fixed bezel Cap. 50/220 INCLUDED Maximum permissible weights Max. piece weight between points 2,560 kg With 1 bezel / With 2 bezels 3,200/4,000 kg Rim-in with center of gravity at 250 mm. 800 kg Others Total power 28 kW Machine weight 4,900 kg. Machine Di ...
Lathe Monforts RNC4 1988 and 1995 Lathe Monforts RNC 5 BJ 1992 Lathes Monforts RNC7 BJ 1992 and 1993
CNC controller: Fanuc 18i-TB Capacity X-axis travel mm: 157,5 Y-axis travel mm: 35 Z-axis travel mm: 464.8 B-axis travel mm: 600 C-axis: 360º (0,001º) Turning length mm: 399 Max. turning diameter mm: ø: 190 Distance between spindle centers mm: 750 Bar work capacity mm: 52 Upper turret Number of tool slots St .: 12 Speed driven tools RPM: 6.000 Drive power driven tools kW: 5.5 / 3.7 Number of upper turrets: 1 Lower turret Number of tool slots St .: 12 Speed driven tools RPM: 6.000 Drive power driven tools kW: 5.5 / 3.7 Milling function: Both Turrets Main spindle Speed spindle rpm: 5.000 Counter spindle Speed spindle rpm: 4.500 Drive power spindle kW: 11 / 7.5 Equipment Chip conveyor Part catcher Workarea light Bar Loader RBK 10016 Working time hours Potencial nominal kVA: 67,2 Basic machine dimensions / weight Length mm: 3.675 Width mm: 2.258 Height ...
The machine is in good technical condition, after prior agreement it is possible to test it. Control unit Hurco Max Turning diameter 254 mm Turning length 340 mm Range over bed 405 mm Range over cross feed 230 mm Length between centers 403 mm Bar capacity 45 mm X-axis movement 177 mm Z-axis movement 355 mm Spindle speed 6000 rpm. Motor power 11 kW
Key data: 20 mm, 205 mm
Star ECAS 20 CNC Swiss Automatic Lathe CNC control Star NICS (Yaskawa-Siemens 840DI) Turning diameter 20 mm Turning length 205 mm Spindle diameter 20 mm Spindle speed 500-10,000 rpm Spindle motor 3.7/2.2 kW Min. indexing C-axis main spindle 0.001° Min. indexing C-axis subspindle 0.001° Number of tools on the tower 16x Spindle torsion driven tools 8,000 rpm FMB Turbo 3-26 (3200) LxWxH 6850x1150x1765 mm If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.
turning diameter: 376 mmturning length: 1245 mmcontrol: FANUC i-Series turning diameter over bed: 376 mmx-travel: 230 mmz - travel: 1350 mmrapid travel x/y/z: 24/30 m/minmain spindle speeds:: 2800 spindle motor: 35 / 26 kWmax. torque on the spindle: 1613 Nmspindle passage: 102 mmtotal power requirement: 33,91 Kvaweight of the machine ca.: 7 tdimensions of the machine ca.: 4,6 x 2,11 x 2,3 mEquipped with:- Fanuc i-Series CNC control- C-axis- 3-jaw chuck, 304 mm diameter- 12-station tool turret- Tailstock- Chip conveyor- CEOnly 2,300 spindle hoursThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Control Winmax Turning diameter 335 mm Turning length 550 mm Spindle speed 3000 rpm Tailstock 12-Station Turret with Driven Tools VDI 40 Chip Conveyor, IRCO Short Bar Feeder IRS-RBK 1001 Tool Measurement Parts catcher
turning diameter: 1800 mmturning length: 600 mmcontrol: Siemens 6 - Jaw Chuck: ? spindle bore: 130 mmspindle nose: DIN 55027 Größe 11 turning speed range: 1 - 400 U/minmax. torque on the spindle: 9000 total power requirement: 38 / 52 kWweight of the machine ca.: 25 tdimensions of the machine ca.: 6x3x2,5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning length: 2000 mmgreates pass round over bed: 630 mmswing diameter over slide rest: 350 mmcontrol: Monforts Control System K bed width: 550 mmturning speed range: 2 - 1800 U/minspindle diameter in front bearing: 120 mmspindle head DIN 55027 - Size: 8 tool taper: RD2 PARATquill stroke: 210 mmspindle bore: 71 mmtotal power requirement: 30 kWweight of the machine ca.: 5 tdimensions of the machine ca.: 4,90 x 2,10 x 2,00 mThree-jaw chuck / key bar / Ø250mmFour-jaw chuck3-jaw chuck for tailstock4-station tool post head PARATFixed steady rest, Ø smallFixed steady rest, Ø largeVarious chuck jaws, live centers, live centers, tool holdersChip conveyor with coolant pumpThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A CNC compact turning machine Eguro is available. Turning diameter: 350mm, machining diameter: 200mm, turning length: 200mm, speed: 5000rpm, bar capacity: 1inch, travel X/Z: 250mm/250mm, rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 1500mm/1500mm/1200mm, weight: approx. 1250kg. An on-site inspection is possible.
The machine is in good technical condition, testing possible after prior agreement. Max. rotating diameter 480 mm (approx. to the current design of the workpiece removal blade) Max. machined diameter 340 mm Max. turning length 785 mm Collet + 10 hydraulic chuck B210-A06-01, 3x soft jaws (Schunk KM-WBL 103) 1x hard jaws (Schunk SHB-J 100) hydraulic through-cylinder SS 1770, draw tube Main spindle Spindle with JIS A2-6 end, bore dia. 80 mm, integrated motor Speed range 45 - 5,000 min-1 Power/continuous operation 22 kW/15 kW Continuously controlled C-axis, 3600 with 0.001 increment Secondary spindle Speed range 50 - 6,000 min-1 Power/continuous operation 11 kW/7.5 kW Spindle with end dia. 14O mm, bore dia. 62 mm, integrated motor Continuously controlled C-axis, 360° with 0.001° increment Collet + 6" hydraulic chuck B206-01, 3 x set of soft jaws (Schunk KM-WBL 62) hydraulic thr ...
spindle passage: 80 mmmax. turning diameter: 395 mmMax. Turning length: 750 mmcontrol: System TX 8H max. Spindle speed: 3.150 U/min.CNC lathe | TRAUB - TNA 400The machine is in a well-maintained condition.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags:TNA400 | TNA-400The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle passage: 80 mmmax. turning diameter: 460 mmMax. Turning length: 1.000 mmcontrol: System TX 8F max. Spindle speed: 2.800 U/min.CNC lathe | TRAUB - TNA 500The machine is in a well-maintained condition.The machine videos from the production plant will be shared on request.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags:TNA500 | TNA-500The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
control: Fanuc 31/32 i : 2 chucking diameter: 170 mmswing diameter: 210 mmx-travel: 400 mmz-travel: 200 mmlength: 2500 mmwidth: 1900 mmheight: 2300 mmweight: 5500 kgturning height: mmturning diameter: mmswing diameter: mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A Doosan CNC lathe is available. Turning diameter: 300mm, turning diameter over bed/face slide: 550mm/390mm, max. turning length: 510mm, travel path X/Z: 205mm/580mm, rapid traverse: 24m/min, C-axis: 360°, bar capacity: 65mm, spindle bore: 76mm, speed: 4500rpm, tool stations: 12. Machine dimensions X/Y/Z: approx. 3500mm/1650mm/1800mm, weight: approx. 4250kg, control: Fanuc Series 18i-TB. Documentation vorhanden. An on-site inspection is possible.
Used machine Machine type: CNC turning and milling center Model: CTXalpha 500 V6 Manufacturer: DMGMORI Control: Celos with Siemens 840D si First commissioning: 2022 #001272 Technical data Turning diameter max. approx. 240mm Turning diameter standard approx. 200mm Chuck size approx. 210mm Turning length approx. 480mm Rod diameter max. approx. 52/option65mm Turret Stations 12 X-axis approx. 210mm Z-axis approx. 525mm Spindle speed 1/2 approx. 5000/6000 rpm Speed AGW max. approx. 5000U/ Rapid traverse X/Z/Y 30/30/22.5 • Main spindle 5000 Ulmin • Hydraulic 3-jaw chuck 210 mm • Sub-spindle 6000 Ulmin • Hydraulic 3-jaw chuck 170mm • 12 station turret VDI 30 Trifix • Tool drive for all stations • C-axis • Y-axis • Alternating speed • Coolant supply through the sub-spindle • Swivelling tool presetter • Coolant spray gun, 5bar • CTXalpha ...
Used machine Machine Type: CNC Swiss Automatic Lathe Model: Sprint32/8 Manufacturer: DMGMORI Control: Fanuc 32i First commissioning: 2019 #001328 Location: Germany T-main and sub-spindle - Y-axis on carriage 1 - Y-axis on carriage 2 - C-axis on main spindle - C-axis on sub-spindle - Tank for chips included Coolant Pump - Workpiece unloading belt - Flushing for counter-spindle pliers - Hinge belt chip conveyor - Signal lamp 4-colour - IEMCA Boss 338/32HD bar feeder This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.
Key data: 1600 mm, 3500 mm, 800 mm
For sale is: 1 Piece Used Face and Lace Lathe Manufacturer: Werkzeugmaschinenfabrik Zerbst GmbH Type: DP1 / S3 x 3500 Year of manufacture: 1994 Technical data: Largest turning diameter over bed: 1,600mm Center width: 3,500mm Spindle bore: 100mm Face plate diameter: 1,250mm Total mass of the machine: approx. 24.8t incl. documentation Further pictures and videos can be sent on request. The following things have been renewed/repaired on the machine in the last four years: At the end of 2022, the tailstock was completely overhauled. New bearing and new tip and lubrication. 2024 Cross Support regenerated. Refurbishment of the wedge strips with new sliding coating, snatchers on the guideways smoothed by scraping, Bearing seats of the spindles made smooth, wedge strips in the contact surface and covering surface scraped. Lubrication pump cle ...
Used machine Machine type: CNC turning and milling center Model No.: CTXgamma1250TC4a Manufacturer: DMGMORI Control: Celos with Siemens 840D si First commissioning: 2020 #001348 Location: Germany Technical data - Main spindle as integrated spindle motor, ISM102 - Sub-spindle as integrated spindle motor, ISM 76 - tailstock function for the sub-spindle - C-axis and spindle brake (hydr.) - Chuck rinsing device of the main spindle, external - Absolute, direct displacement measuring systems X-'Y-'Z1-axis - Differential stress main spindle - 36-cavity tool disc magazine - Hinge belt chip conveyor - Coolant system 8/20/80 bar - Coolant supply through the sub-spindle - Coolant spray gun - Mechanical oil mist separator - Automatic work area door - Workpiece probes - Tool turret at the bottom This offer is subject to change and non-binding. Changes, errors and prior ...
Used machine CNC turning-milling center Machine type: DMG MORI CLX450TC Control:DMG MORI SLIMline® Siemens Operate Year of Make: 2022 Location: Germany #0011281 Technical data Turning diameter max. spindle 1+2 approx. 400 mm Turning diameter standard spindle 1+2 approx. 250 mm Rod diameter max. spindle 1 approx. 65 mm X-axis approx. 750 mm Z-axis approx. 1,100 mm Y-axis approx. +-100 mm A-axis (spindle 2) approx. 1,200 mm B-axis approx. 240° (+-120°) mm Spindle speed 1+2 approx. 5,000 rpm Speed milling pindle approx. 12,000 rpm Rapid traverse X/Y/Z approx. 40 m/min Rapid traverse A spindle 2 approx. 40 m/min Rapid traverse B axis approx. 70 m/min Power spindle 1+2 max. approx. 17 (40%) kW Power milling spindle max. approx. 10.5 (40%) kW Facilities Main Drive Spindle 1/2 17KW 40% - 5000rpm - Turning-Milling Spindle HSK63 10,5KW 40% - 12,000rpm - tool magazi ...
Used machine Machine Type: CNC Turning Center Model: CLX 750 V3 Manufacturer: DMGMORI Control: SLIMllne® Multi-Touch Control Siemens Year of Make: 2021 Location: Germany #001273 Turning diameter max. approx. 700 mm Turning diameter standard approx. 610 mm Chuck size approx. 400 mm Turning length approx. 1,300mm Rod diameter max. approx. 127 mm Turret stations approx. 12 X-axis approx. 435 mm Z-axis approx. 1,300 mm Tailstock approx. 1,200 mm Spindle speed max. approx. 2,000 rpm Speed AGW max. approx. 4,000 rpm Rapid traverse X/Z approx. 30 m/min Compressed air bar,L/min approx. 5, 100 bar,L/min Machine weight approx. 10,200 kg Facilities - Main spindle A2-11" with AC motor, 36/46 kW (100/40%), 2,000 min-¹ - 3-jaw chuck 300mm - Partial hollow clamping device for the main spindle 127mm - Chuck flush for the main spindle - 12-fold servo tool turret mount VDI ...
CK 50 CNC turning center was built in 2022. This state-of-the-art, extremely efficient machine is used in both unit and series production. Workpieces with a maximum diameter of 570 mm and a length of 500 mm are machined by means of a reliable spindle and cutting tools taken from a 12-position turret. The spindle, driven by a high-powered motor reaches a speed of 4200 rpm and moves in two X,Z axes with feeds of 270 mm and 610 mm respectively. The hydraulic tailstock, in turn, ensures precise positioning and support of the workpiece during the turning process. The CNC CK50 lathe has an inclined bed, which increases the stability of the design through better distribution of loads during machining. This solution reduces the risk of vibration and oscillation, thus increasing turning accuracy and giving the ability to perform more complex operations. It also makes it easier to evacuate the ...
turning diameter over bed: 1450 mmturning diameter over slide rest: 950 mmturning length: 4000 mmcentre height: 725 mmfaceplate diameter: 1000 mmtravel -x axis: 980 mmtravel -z axis: 4000 mmworkpiece weight: 2 toturning speed range: 1,5 - 1000 U/minspindle hollow: 500 mmControl: Siemens 828D total power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - m- CNC Control Siemens 828D- Front and Rear 1000mm dia. 4 – chucks- Tailstock- Chip Conveyor- Boring Bar 1500 mm x 120 mm- Boring Bar 1690 mm x 120 mm- Boring Bar 1000 mm x 80 mm- Boring Bar 1500 mm x 100 mm - Quantity of KM ToolingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A conventional lead and feed screw lathe Antonio Anslemi is available. Center height: 260mm, center distance: 1500mm, swing diameter over bed/support/gap bed: 520mm/320mm/670mm, bed width: 370mm, speed: 1400rpm, tailstock quill diameter: 65mm, tailstock stroke: 240mm, machine dimensions X/Y/Z: approx. 3000mm/1200mm/1500mm, weight: approx. 2500kg. An on-site inspection is possible.
Used machine Machine Type: CNC Turning Center Model No.: NLX3000Y/3000 Manufacturer: DMGMORI Control: Celos Year of Make: 2020 #001355 Turning diameter max. approx. 420 mm Turning diameter standard approx. 310 mm Chuck size approx. 300 mm Turning length approx. 3,123 mm Rod diameter max. approx. 90 mm Turret stations approx. 12 X-axis approx. 280 mm Z-axis approx. 3,170 mm Y-axis approx. 120 (±60) mm Tailstock approx. 3,164 mm Spindle speed max. approx. 3,000 rpm Speed AGW max. approx. 6,000 rpm Rapid traverse X/Z approx. 30 m/min Rapid traverse Y approx. 10 m/min Rapid traverse C approx. 300 rpm Power consumption approx. 54 kVA Compressed air bar,L/min approx. 5, 100 bar,L/min Footprint L x W x H approx. 8.30 x 3.50 x 2.41 m (without chip conveyor) Machine weight approx. 14,200 kg Main spindle 22/18,5KW • 3jaw chuck set • rpm 3000 • 12 station turre ...
Inv. Num. : 8997 Type: SKT 100 Producer: KIA Created: 2006 Parameters: Control System: FANUC Series Oi-TB Switch-on hours: 65471 h Hours: 19209 h Max. turning length: 300 mm Max. turning diameter: 350 mm Maximum turning diameter over bed: 550 mm Maximum turning diameter over support: 350 mm Maximum length of travel in the X-axis: 210 mm Maximum feed in the Z-axis: 330 mm Maximum spindle speed: 6000 1/min Spindle taper: Morse 4 Max. rod diameter: 45 mm Lathe chuck diameter: 165 mm Weight: 3800 kg
Inv. Num. : 9002 Type: LB3000EXII MYW800 Producer: OKUMA Created: 2014 Parameters: Control system: OKUMA OSP-P300L CNC Switch-on hours: 65458 h Hours: 36054 h Maximum turning length: 785 mm Max. turning diameter: 480 mm Max. turning diameter: 340 mm Spindle diameter: 80 mm Motor power: 22 kW Minimum spindle speed: 45 1/min Maximum spindle speed: 5000 1/min Travel X: 260 mm Travel Y: 115 mm Travel Z: 510 mm Tool magazine: 12 pieces Length: 3330 mm Width: 1800 mm Height: 2250 mm Weight: 5250 kg Equipment: Baking Collets Axis C Sub-spindle Powered tools OSP-P300L Advanced One Touch CF-M-E FILTERMIST FX4002 Suction High-pressure cooling Grips Tool Holder Reducer insert tube In June 2019, the spindle was repaired due to defective bearings. In June 2025, the U4 control unit was replaced. In October 2025, the M control unit w ...
Machine Stanko 166, 6.3 meter DBC. Completely overhauled in 2024. Electric tailstock. Cable guides installed. Machine in like-new condition. Manual available. Dismantling and loading are included in the price. All headstock components are the same as on the DIP 500. An operator who already operates the DIP 500 can easily operate the 166 DIP 600 without retraining. The machine comes complete with two lunettes, a Ø 300-600 and a new Ø600-1050. Work piece maximum diameter: – above bed: 1250mm – above support: 900mm Work piece maximum length: 6300 mm Spindle speed(rpm): 5…214 Max workpiece weight: 10000 kg Motor power: 30 Kw Machine overall dimensions: – length: 10100mm – width: 2320mm – height: 2000mm Machine weight: 25000kg
: 0330 mm: 210 mm: 0635 mm: 167 mm: 40 mm: 2,2 kWspindle turning speed - stepless: 30-3000 U/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
