Manufacturer:
(Category: 102)
CONTROLS CNC controls MAZATROL T32-2 BASIC FUNCTIONS number of spindles: 1 number of turrets: 1 live positions: no WORKING RANGE TURNING swing diameter (max): 440 mm turning diameter (max): 225 mm bar diameter (max): 51 mm worpiece length max.: 440 mmMAIN SPINDLE spindle revolutions (min): 45 /min spindle revolutions (max): 4500 /min spindle diameter: 61 mmX/Z SLIDE rapid traverse Z: 30000 mm/min rapid traverse X: 30000 mm/min tool fixture: Turret number of tool positions (total): 12 X SLIDE X-axis travel: 220 mmELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space requirements -left/right-: 2500 mm space requirements -front ...
Swing diameter over bed/cross slide: 430mm/210mm, distance between centers: 510mm, travel X/Z: 160mm/310mm, spindle speed: 6300rpm, rapid traverse: 20m/min, tool positions: 12, tool holder: VDI30. Machine dimensions X/Y/Z: approx. 2250mm/2000mm/2000mm, weight: approx. 2600kg, control: Fanuc Series 21-T, operating hours: approx. 40000h. The hour counter was reset after each repair. The machine has electronic issues that cause sporadic system failures. An on-site inspection is possible.
The machine is in good technical condition, testing is possible by prior arrangement.
GILDEMEISTER CTX 400E CNC turning center was built in 2000 in Germany by GILDEMEISTER Drehmaschinen GmbH. The machine, designed for machining workpieces with a maximum diameter of 570 mm, is distinguished by its high precision and reliability. The large working area is equipped with a 12-position turret and a spindle, whose high-powered motor allows all modern cutting tools to be fully utilised. The CTX 400E CNC lathe weighs approximately 5300 kg. Technical specifications of the GILDEMEISTER CTX 400E metal lathe - maximum turning diameter: 440 mm - maximum turning diameter over bed: 570 mm - maximum turning diameter over slide: 420 mm - maximum turning length: 635 mm - distance between centers: 700 mm - feed in the X/Z axis: 220/635 mm - maximum spindle rotational speed: 5000 rpm - spindle bore diameter: 79 mm - spindle drive power: 21 kW - 12-position turret - number of ro ...
STAR Swiss lathe S16-R, built in 2001 Swiss lathe SA16-R, Ø16mm with FMB Minimag magazine Pick-up spindle Parts Conveyor Belt Coolant system only ran on oil no chip conveyor
turning diameter: mmturning length: 300 mmswing diameter over bed slide: mmtotal power requirement: kWweight of the machine ca.: 0,4 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning length: 500 mmturning diameter over bed: 297 mmturning diameter over slide rest: 160 mmspindle bore: 36.0 mmtool adaptor: DIN 55022 Gr. 5quill:: 3 MKquill travel: 90.0 mmturning speeds: 30 - 3550 U/minmotor speeds:: 1410 / 2830 U/mintotal power requirement: 3.3 kWvoltage: 380 Vweight of the machine ca.: 620 kg.range L-W-H: 1420 x 700 x 1200 mm from a vocational school - in very good condition () particularly suitable for medium-precision turned parts Features:- Robust lead/feed screw lathe- HEIDENHAIN 3-axis digital display VRZ 773”- RÖHM three-jaw chuck Ø 160 mm- Foldable lathe chuck guard- Chuck key- MULTIFIX steel holder A, with 3x new inserts- Movable tailstock- Swiveling machine light- Control panel, front left- Automatic feeds for face and upper support- Machine base, with cabinet door (storage space)- Chip splash guard rear panel- 1x empty tool cabinet- Emergency stop ...
turning length: 800 mmturning diameter over bed: 330 mmturning diameter over slide rest: 170 mmturning speed range: 24 - 2800 U/minspindle bore: 38.0 mmcentre height: 165 mmtotal power requirement: 3.5 kWweight of the machine ca.: 850 kg.dimensions of the machine ca.: 1850 x 800 x 1700 mm from a vocational school - in good condition () particularly suitable for medium-precision turned partsFeatures:- Robust lead/feed screw lathe- HEIDENHAIN 3-axis digital display VRZ 770”- RÖHM three-jaw chuck Ø 160 mm- Foldable lathe chuck guard- Chuck key- TRIPAN steel holder with 3x inserts- Sliding tailstock- Swiveling machine light- Control panel, front left- Automatic feeds for face and upper support- Machine base, with cabinet door (storage space)- Chip splash guard rear panel- 1x empty tool cabinet- EMERGENCY stop button- Operating instructionsThe data for this ad was created with ModulMWS - ...
turning length: 500 mmturning diameter over bed: 297 mmturning diameter over slide rest: 160 mmspindle bore: 36.0 mmtool adaptor: DIN 55022 Gr. 5quill:: 3 MKquill travel: 90.0 mmturning speeds: 30 - 3550 U/minmotor speeds:: 1410 / 2830 U/mintotal power requirement: 3.3 kWvoltage: 380 Vweight of the machine ca.: 620 kg.range L-W-H: 1420 x 700 x 1200 mm from a vocational school - in very good condition () particularly suitable for medium-precision turned parts Features:- Robust lead/feed screw lathe- HEIDENHAIN 3-axis digital display VRZ 770”- RÖHM three-jaw chuck Ø 160 mm- Foldable lathe chuck guard- Chuck key- MULTIFIX steel holder A, with 3x new inserts- Movable tailstock- Swiveling machine light- Control panel, front left- Automatic feeds for face and upper support- Machine base, with cabinet door (storage space)- Chip splash guard rear panel- 1x empty tool cabinet- Emergency stop ...
turning length: 1.000 mmswing diameter max. over bed cover: 600 mmswing diameter above cross guideway: 420 mmcontrol: Eltropilot Heidenhaintravel -x axis: 275 mmtravel -z axis: 1.065 mmMain spindle:: turning speed range - main spindle: 16 - 3.200 min/-1power capacity - main spindel: 27 kWmax. Torque: 800 Nmspindle diameter in front bearing: 120 mmspindle bore: 85 mmchucking diameter: 260 mmspindle head: 220H5 turret:: number of toolpositions: 12 pos.Shank diameter: 40 mmturret change time: 0,8 sec.Tailstock:: diameter of quill: 100 mmquill stroke: 120 mmtaper of center: MK 5 pressure center sleeve: max. 950 daNfeeds:: rapid traverse: X: 10 / Z: 15 m/minFeed force: X: 500 / Z: 1.000 daNtotal power requirement: 52 kVAweight of the machine ca.: 7,5 tdimensions of the machine ca.: 5,5 x 2,5 x 2,1 mDocuments: Chip conveyor: Coolantsystem: Tailstock: hydraulic system: Three Jaw Chuck: ...
turning diameter: max. 300 mmturning length: max. ca. 550 mmcontrol: PC Fusion CNC 640 T standard turning dia.: 276 mmswing diameter: max. 525 mmDistance Spindlenose - turret face: 115 - 690 mmMain spindle:: turning speed range - main spindle: 35 - 4.000 min/-1power capacity - main spindel: 22 kWmax. Torque: 351 Nmspindle nose: A2-6 spindle bore: 76 mmmax. usable bar diameter: 64 mmchucking diameter: max. 250 mmC-Axis: 360 °turret:: number of toolpositions: 12 pos.tool taper: VDI 40 Shank diameter: 25 mmDrill shank diameter: 40 mmturret change time: 0,2 / 0,6 sec.Tool Drive:: Spindle speed - driven tool pos.: 25 - 4.500 min -1power capacity - driven tool pos.: 3,7 kWmax. Torque: 35 NmSubspindle:: Spindle speed range subspindle: 35 - 4.000 min/-1power capacity - Sub spindle: 7,5 kWmax. Torque: 57 Nmchucking diameter: max. 150 mmaxis stroke:: x-axis: 190 (185 + 5) mmz-axis: 575 (580 ...
max. turning diameter: 580 mmturning length: 1500 mmcontrol: OSP 7000 L greates pass round over bed: 610 mmswing diameter over slide rest: 580 mmMain spindle:: turning speed range - main spindle: 12 - 2.800 min/-1spindle bearing diameter: 150 mmspindle bore: 110 mmspindle nose: JIS A2-11 power capacity - main spindel: 37 (30) kWC-Axis: 0,001 °axis stroke:: x-axis: 598 mmy-axis: 230 (+110 / -120) mmz-axis: 1.660 mmfeeds:: rapid traverse: X / Y: 12.000 mm/minrapid traverse: Z: 20.000 mm/minrapid traverse: C: 100 min/-1cutting feed speed: X / Z / Y: 0,001 - 1.000 mm/Uturret:: type: H2 ATC number of toolpositions: 2 (1x L-Tool / 1x M-Tool) pos.driven statition: stufenlos / stepless Spindle speed - driven tool stations: 40 - 3.000 min -1tool shank height: 25 mmBoring bar shank diameter: 50 mmTailstock:: diameter of quill: 120 mmquill stroke: 170 mmtaper of center: MT 5 tool magazin:: n ...
turning diameter over bed: 500 mmturning diameter over slide rest: 310 mmturning length: 3000 mmturning diameter in the gap: 750 mmcentre height: 250 mmturning speeds: 20-1000 U/minno. of turning speeds: 18 spindle bore: 56 mmlongitudinal feed: 0,045-1,09 mm/Uface feed: 0,025-0,625 mm/Unumber of feeds: 55 total power requirement: 4 kWweight of the machine ca.: 2,37 tdimensions of the machine ca.: 4,9 x 1,1 x 1,3 mMachine still in the delivery factory: Electric 380 Volt: chuck: Forkard 315 mmTool holder system Multifix: Typ C Taper turning device: Chip protect bonnet: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
TOS SN 50 B (1988)Manufacturer: TOSModel: SN 50 BYear of manufacture: 1988Type: Universal centre latheSwing over bed: 500 mmSwing over cross slide: 270 mmSwing in gap: 700 mmDistance between centres: 1500 mmBed width: 300 mmSpindle bore: 52 mmSpindle speed range: 22 – 2000 rpmSpindle nose: Camlock D1-6Spindle motor power: 7.5 kWLongitudinal feed range: 0.04 – 2.24 mm/revCross feed range: 0.02 – 1.12 mm/revMetric threads: 0.5 – 224 mmInch threads: 56 – 0.25 TPIModule threads: 0.25 – 112 mmDP threads: 112 – 0.25 DPTailstock quill diameter: 75 mmTailstock quill travel: 160 mmTailstock taper: Morse 5Machine length: approx. 2800 mmMachine width: approx. 1100 mmMachine height: approx. 1300 mmMachine weight: approx. 2000 kg
This 3-axis DMG MORI CLX 550 V4 was manufactured in 2020. It features a universal lathe with driven tools, a C axis, and a Y axis. Key specs include a 12-station VDI40 turret, a main spindle with a 3,250 rpm and 22/33 kW power, and a hydraulic 3-jaw chuck. Ideal for high precision turning, this machine also comes equipped with a DMG MORI SLIMline® control panel. If you are looking to get high-quality turning capabilities consider the DMG MORI CLX 550 V4 machine we have for sale. Contact us for more information.
This Doosan Puma SMX 2600 ST turn-mill centre was manufactured in 2018. It features a FANUC 31i-B5 NC system with a 15.0 color display. The machine is CE certified and operates on a 3-phase AC 380V / 50 Hz power source. It boasts a max left spindle speed of 4000 rpm and a max milling spindle speed of 12,000 rpm. The tool storage capacity is 80 tools, and it includes dual pressure chucking. Consider the opportunity to buy this Doosan Puma SMX 2600 ST machine we have for sale. Reach out for more information.
This 5-axis Okuma Multus B300-W was manufactured in 2006. It features a robust turn-mill center with a swing over bed of 630 mm and a maximum turning diameter of 450 mm. Equipped with a bar feeder, toolsetter, and a tool magazine holding 40 tools, it ensures efficient operation. The control system is an advanced Okuma OSP-P200L. If you are looking to get high-quality turning capabilities consider the Okuma Multus B300-W machine we have for sale. Contact us for more information.
This 3-axis Okuma LB 3000 EX II was manufactured in 2022, featuring a robust horizontal turning capability. It includes an Iemca KID 80 bar feeder, a 250 mm SMW chuck, and a 170 mm Kitagawa chuck. With a main spindle motor power of 22 kW and rotational speeds up to 6000 rpm, it ensures efficient turning operations. If you are looking to get high-quality turning capabilities consider the Okuma LB 3000 EX II machine we have for sale. Contact us for more information.
This DOOSAN PUMA 4100B was manufactured in 2015. A robust horizontal turning machine featuring a Fanuc 32i CNC system, it offers a maximum turning diameter of 550 mm and a length of 1,042 mm. Equipped with a 10-station turret and a chip conveyor, its ideal for efficient machining with 7,200 hours of operation. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA 4100B machine we have for sale. Contact us for more information.
We are selling this lathe. It can be tested when connected. Accessories included with the machine. Turning diameter: 2,000 mm Turning length: 10,000 mm Workpiece weight (max.): 60,000 kg Machining diameter: 2,000 mm
Mori Seiki SL250 b 500 High-performance CNC lathe with bar feed (Kupa 2 m) Collet chuck Passage 65 mm Year of construction 1998 Control Fanuc 16l Block Recording Switch-on hours approx. 88875 Spindle hours 19,000 Miscellaneous accessories:
Key data: 376 mm, 760 mm, 3500 1/min
Main parameters: Controller: FANUC 0iD/31iA Chuck.: SAMCHULLY 10" Spindle bore.: 86mm With jacket tube.:78mm Revolver head.: 12 main positions 12 secondary positions, BMT65 connection, Sub spindle: 4500 1/min Main spindle power: 22kW S1max=3500 1/min Living tool power: 5.5kw Tool speed max=5000 1/min X movement range.: 260mm Z axis movement range.: 830mm Y axis movement range: + - 52mm (104mm) C axis Maximum turning length: L=760 Largest turning diameter: D=376mm Fast travel speed.: 30m/min Automatic tool measurement with probe arm Weight.: 6450 kg
Key data: 370 mm, 712 mm, 3500 1/min
DOOSAN LYNX300M (34000euro) -:CNC FANUC - Chuck diameter: 250 mm - Diameter over bed: 651 mm - Max. turning diameter: 370 mm - Max. turning length: 712 mm - Spindle bore: 76 mm - Spindle speed: 3,500 rpm - C-axis - Main spindle motor: 15 kW - Rapid feeds X/Z: 30/24 m/min - BMT 55 turret: 12 positions - Rotating tool speed: 5,000 rpm - Machine weight: 4.5 t - Overall dimensions: 3 x 1.8 x 1.7 m
Key data: 376 mm, 760 mm, 3500 1/min
Main parameters: Controller: FANUC 0iD/31iA Chuck.: SAMCHULLY 10" Spindle bore.: 86mm With jacket tube.:78mm Revolver head.: 12 main positions 12 secondary positions, BMT65 connection, Programmable hydraulic Tailstock.: MT5 Main spindle power: 22kW S1max=3500 1/min Living tool power: 5.5kw S2max=5000 1/min X movement range.: 260mm Z axis movement range.: 830mm Y axis movement range: + - 52mm (104mm) C axis Maximum turning length: L=760 Largest turning diameter: D=376mm Fast travel speed.: 30m/min Automatic tool measurement with probe arm Weight.: 6000 kg
turning diameter: 500 mmturning length: 800 mmcontrol: Siemens 840D greates pass round over bed: 700 mmMain spindle:: turning speed range - main spindle: 20 - 5.000 min/-1power capacity - main spindel: 25 / 34 kWmax. Torque: 380 NmC-Axis: 0,01 °max. chucking diameter: 320 mmmilling spindle: milling spindle motor: 22,5 milling head speed: 12000 U/minb-axis: +/- 110 °tail stock: axis stroke:: x-axis: 480 mmy-axis: +/- 100 mmz-axis: 845 mmfeeds:: rapid traverse ( X / Y / Z ): 60 / 22,5 / 30 m/minfeed power: 5,6 / 5,6 / 7,4 kNswitching time: 30°: 0,4 secturret:: number of toolpositions: 24 pos.tool taper: HSK A 63 total power requirement: - kWweight of the machine ca.: 10 tNC - turning and milling center- CNC control Siemens 840D Ergo Pro- Milling head with B-axis- Y axis- Coolant system (through Spindle) 15bar with paper band filter- chip conveyor- Tailstock- Suction- 24-fold tool ...
max. bar material dia.: 42 mmmax. turning diameter: 180 mmturning length: 350 mmcontrol: Fanuc Main-/Counter -spindle turning speeds: 6.000 U/minnumber of tapers in turret head: 2 x 12 CNC Turning- and Milling Center | SCHAUBLIN - 42S TM-6 with main and sub-spindle, 2x turrets aligned for driven tools and equipped with a bar feeder.The machine has 7.856h running hours.The machine is in good condition and can be inspected under power.Please note that the technical details were added from comparable machines.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: 42STM-6 | 42STM | 42STM6 | 42 S TM-6The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
DMG MORI NLX2500/700 with tool drive and C-axis Universal lathe with 3-axis Turning length 700 mm Main spindle with integrated motor spindle ISM (rod diameter in mm) Hydr. Clamping devices, clamping cylinders, chucks C-axis with hydr. Spindle brake 10-speed BMT star revolver 10-speed tool drive NC tailstock CELOS with Mitsubishi control M730UM
Inv. Num. : 8714 Type: SQT 100 Producer: MAZAK Created: 2002 Parameters: Maximum turning length: 305 mm Maximum turning diameter: 280 mm Maximum spindle speed: 6000 1/min Spindle bore: 52 mm Weight: 3600 kg Equipment: Conveyor Bar Feeder
Inv. Num. : 5982 Type: TURNTEC 83-200 Producer: VOJUS Created: 2003 Parameters: Control system: TURN tec. Maximum turning length: 1800 mm Maximum turning diameter over bed: 400 mm Maximum turning diameter over support: 350 mm Turning diameter: 600 mm Spindle diameter: 10 mm
Specifications: Tip height: 140 mm Turning length: 500 mm Accessories (included): Lunette Multifix "A" Collets 0.5 – 24 mm Milling device (Y-axis) 3-jaw chuck 125 mm Cs Urh Axexlr Hkszorh Face Plate 260 mm Running tip Chuck Die stock 4-jaw chuck Coolant pump Instruction manual (German)
Innovac GmbH
