subcategories
(3rd category level)
Manufacturer:
(Category: 110)
Key data: 400 l/min, 5
Coolant tank 20 m3 consisting of 2 tanks that are joined together. From container 1 there is an overflow into container 2. Installation area approx. 2500 x 4000 mm for both containers. Was used as a container for pure oil for the grinding process, so there was no rust at all. Condition very good!
Key data: 120 l/min, 12 W, 7
Text
The used coolant cleaning system based on centrifuge MZF T22 Turbo-Separator AG, is connected to a tool grinding machine (Anca, Rollomatic, Walter, Schneeberger, etc.) and supplies the grinding machine with clean emulsion or oil. The pure oil is pumped directly to the grinding machine by pumps placed on the coolant cleaning system. Depending on the process, a system can also supply several machine tools with clean coolant. Advantages of this system: 1. Use with oil or emulsion no problem 2. Filtration without consumables with the centrifuge, 3. Use with tungsten carbide, ceramic or HSS no problem. 4. The sludge comes out of the centrifuge dry, with minimal residual moisture. Supply pump capacity 1 (for process supply): up to 100 litres/min. at 5-7 bar Supply pump 2 (for spindle cooling) 20 litres/min. at 5 bar The contaminated oil runs back from the machine into the filtr ...
The used coolant cleaning system based on centrifuge is connected to a tool grinding machine (Anca, Rollomatic, Walter, Schneeberger, etc.) and supplies the grinding machine with clean emulsion or clean oil. The pure oil is pumped directly to the grinding machine by pumps placed on the coolant cleaning system. Advantages of this system: 1. Use with oil or emulsion no problem 2. Filtration without consumables with the centrifuge, 3. Use with tungsten carbide, ceramic or HSS no problem. 4. The sludge comes out of the centrifuge dry, with minimal residual moisture. Pump capacity of supply pump 1 (for process supply): up to 80 litres/min. at 5-7 bar Supply pump 2 (for spindle cooling) 20 litres/min. at 5 bar The contaminated oil runs back from the machine into the filtration system and is cleaned in the centrifuge. Stage 1: Filtration by a centrifuge, without consumables, th ...
surface area: 1200 x 600 ( x 500 ) mmno. of flutes: 9 groove width: 14 / x 62,5 mmtotal power requirement: 0 kWweight of the machine ca.: ? tPacking: Holzkiste 1400850700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
surface area: 805 405 (x 340 ) mmno. of flutes: 8 groove width: 12 / x 45 mmtotal power requirement: 0 kWweight of the machine ca.: ? tdimensions of the machine ca.: ? mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Zeiss CNC Coordinate Measuring Machine Prismo MP5 Year of manufacture: 8/1999 Last calibration 9/2023 Measuring range: X= 900 mm, Y= 1200 mm, Z= 700 mm Device features, equipment: Control C98 with control panel Sensors RDS with RST Pushbutton Changer Magazine 5-fold RST 5x probing system Dpp7Jl Pushbutton Accessories Measuring ball Calculator with monitor Software Calypso Basic 5.4 Loading system Other accessories Complete retrofit C99 and Calypso possible
feed pressure: 60 barliter capacity: 40 lpower capacity: 5,5 kWweight of the machine ca.: 0,3 tdimensions of the machine ca.: 1,2 x 0,8 x 1,55 mNo. 4972Hydraulic Aggeregat 250 l / 60 bar / 40 l/minformerly HEYLIGENSTAEDT Heynumat 10Drive: 5,5approx. 300kg ( estimated )Transport dimensions approx. 1.2 x 0.8 x 1.55 m ( EUR exchange pallet )Dimension: 1200 x 750 x 1550 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bar material dia.: max. 85 mmbar length: 3000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 400 mmtotal power requirement: kWweight of the machine ca.: 0,08 tdimensions of the machine ca.: m1 pc. faceplate - diameter 400 mmbore 125 mmfastening 4 screws: 185 M 10 KK 160 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 440 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m1 pc. faceplate - diameter 440 mmbore 60 mmfastening: 4 pcs. screws dia. 173 mm / M 16The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 315 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m1 pc. faceplate - diameter 315 mmbore 75 mmfastening: Camlock - 4 Pcs. 173 M 16 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Grinding wheels are available, they are still unused and originally packaged in a box. 1x Elbe abrasive media (MICROREX) Shape: 01 Straight Disc 104228/1 400,00x200,00x203,20 58AY 80/2 KL 8 V for: 35 m/s forcibly guided; 30 m/s walk-behind 3x Elbe abrasives (MICROREX) Shape: 01 Straight Disc 104228/2 400,00x140,00x203,20 58AY 80/2KL 8V for: 35 m/s forcibly guided; 30 m/s walk-behind 1x Control disc 140mm. Comet (Elbe) S33728 Shape:01 Straight Disc 250,00x140,00x127,00 A120 R13 8-974-51/18 1x Regulating disc 200mm. Comet (Elbe) S32848 Shape: 01 Straight Disc 250,00x200,00x127,00 A120 R13 6-055-24/18 1x WISSCO dressing tile AP23NAD 1x Lifting crane for grinding media
length: 610/710 mmwidth: 625 mmheight: 830 mmweight: ca. 200 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
range L-W-H: 10005002000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
dia. of draw-in collets: 3 / 4 / 6 mmtaper diameter: 18 mmturning speeds: 40000 U/minpower requirement: Luft kWShipping weight: 5 kgPacking: 280160120 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
liter capacity: 110 / 160 ltank: ca. 130 ltotal power requirement: 0,25 kWweight of the machine ca.: 0,13 tdimensions of the machine ca.: 1,4 x 0,45 x 0,6 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 80 mm, 1500 mm, 380 V
For sale; Samsys bar loading magazine type Multisam 2000. The bar loading magazine is in good condition and can still be viewed under power. The maximum bar diameter is approx. 80 mm. The maximum rod length is 1500 mm. Including cable with Harting plug. For more information mailto chrismachinematch.nl
range L-W-H: 960 x 460 x 860 mmweight: 75 kg: 8 St.Tool trolley with 8 drawers, all with tools.- The pull-out drawers are all ball-bearing.- The entire workshop trolley is lockable.- The workshop trolley has 4 stable castors, 2 steerable andlockable.- The tools included are made of chrome vanadium steel.- The workshop trolley has 4 stable castors, 2 steerable, 2lockable, which ensure very comfortable rolling. On thetool trolley there is a stable worktop made of polypropyleneplastic.- The tools included in the workshop trolley are made of chrome vanadium steel andare stored in Styrofoam/foam inserts.+ Drawer 1:- 1/4 inch:13 nuts from 4mm to 14mm, 11 long nuts 4mm – 13mmRatchet, universal joint, extension.- 3/8 inch:10 nuts from 10mm to 19mm, 11 long nuts from 6mm to 19mmRatchet, universal joint, extension.- 1/2 inch:17 nuts from 8mm to 32mm, 9 long nuts from 10mm to 22mmRatchet, univers ...
Laser Cooling Unit Manufacturer: Riedel Type: RW 27/0SR Year of construction:2017 Refrigerant: R134a
control: Dialog 4 type of control: CNC Fräsen The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
control: Dialog 3 + 4 type of control: CNC Fräsen The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
control: Dialog 3 / 4 type of control: CNC Fräsen The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: , mmx-travel: , mmIroning measuring screw,measurement range: 225-250 mmMachine dealer with own stock of 1600 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Coolant system for cooling lubricant RUEZ coolant tank with integrated sludge scraper, chip conveyor • Coolant cleaning system for coolant • Includes two-piece RUEZ fin separator. • Including RUEZ safety tray in accordance with the WHG with 100% collection space • Includes clean tank & RUEZ magnetic roller filter • Year of construction 2022, unused & as good as new • RAL 7035 light grey • Superstructure for chip wagons • No belt filter, sediment system •At call • Price VB Description of coolant system: • Volume approx. 34,720l • Filling volume approx. 32,710l • Usable volume approx. 22,020l + approx. 6,017l (clean tank) • L/W/H approx. 7,341mm/2,800mm/2,000mm • Tank walls 4mm/S235JRG2 • Walk-in, split bin cover • Container pads approx. 100mm • Level detector OWE 2/C as leakage protection • Inlet/distributor with screen basket ...
thickness of jaw: 150 / 160 / 200 mmmax. clamping width: 105 / 138 / 275 mm ca.high of jaw: 46 / 63 mmCondition: unused: New machine vices on rotating plate 360 °, provided with 180 ° degree scalefrom remaining stock at a special price.The body is made of high quality gray cast iron (FC-25), jaws made ofrolled steel, hardened, replaceable.Mod.M 150: span: 105 mm, jaw height: 46 mm, dimensions: 600x200x160 mm,Weight: 26 kg, photos 1-3, price 270, - + VAT.Mod. M 160: with covered spindle, three-way adjustable via socket pin,Span: 275 mm, jaw height: 63 mm, dimensions: 800x270x200 mm, weight:43 kg, photos 4-6, price 700, - + VAT.Mod.M 200: span: 138 mm, jaw height: 63 mm, dimensions: 700x260x200 mmWeight: 54 kg, photos 7-9, price 495, - + VAT. Machine dealer with own stock of 1600 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
tool clamping area: 1 - 32 mmweight: 8 - 12 kgDriven toolholders1: Eppinger, Mod. 6035-3: 270 Euro2: Eppinger, Mod. 6052: 360 Euro3: Eppinger, Mod. 6049-2: 360 Euro4: Wendel, Mod. A 3930: 720 Euro5: Eppinger, Mod. 10809-1-3: 720 EuroMachine dealer with own stock of 1600 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Sergej WalGer-Group
