Accessories used for sale (92)

YEAR: 2018

Swivel Mandrel + Holder OD 105 Application For quick comparison measurement of bores during series inspection. Due to the looped sleeve with a small undersize, the mandrel is drilled into the hole. guided and centered. Execution - Measuring contacts and measuring needle made of carbide (wear-resistant) - Measuring mandrel from Ø 130 mm can be supplied as a cross sleeve or skid-cross sleeve - Standard version Advantage - Easy to use - Minimal measurement time - Maximum measurement reliability - Robust and reliable - Matched to the desired bore diameter + tolerance Auction-ID: A1-47017-72

Cover Protective Cover for FP3 CNC - Splash guard booth for Deckel FP3 milling machines - Distance fastening screws: 910 mm - Dimensions WxHxD: 1270 x 1300 x 950 mm - Weight: approx. 80 kg

Product information \"Handheld Control Unit MMI - Inveor M\" Suitable for: Inveor M frequency inverter Function: Simple configuration of all parameters of a frequency converter Inveor M via a handheld control unit. The MMI is an alternative to PC software for commissioning, Parameter adjustment and service purposes. This allows parameters to be edited, saved and set points to be specified Auction-ID: A1-47017-73

2x Bilz FAEBI 430 + 2x Wedge Shoes - Rubber Air Springs / Machine Feet - 2x wedge shoes + base - 2x Bilz FAEBI 430 rubber air springs + substructure - 9x spacers - By adjusting the air pressure, the deflection behavior can be adjusted - Wear-resistant, low-maintenance air damping, easily adjustable from the outside - No transmission of structure-borne noise Specifications FAEBI 430 Rubber Air Spring: - Load: 2750 - 6500 daN - Max. pressure: 6 bar - Cushion height: approx. 90 mm - Cushion diameter: 480 mm - Support diameter: 315 mm - Dimensions incl. substructure LxWxH: 510 x 510 x 200 mm - Threaded rod: M20 / 180 mm Wedge shoes: - Dimensions incl. substructure LxWxH: 330 x 250 x 200 mm Spacers: - Diameter: 470 mm - Thickness: 2x 4 mm / 2x 2 mm / 2 x 1.5 mm / 3x 1 mm

Face plate, face plate chuck, face launder chuck with 6x T-slots 35x35 mm Auction-ID: A1-47017-32

gebr. Copying device Fabr. Copymat, Type 1301A2

Description The Actuator Pressure Controller (APC) is a pressure control system developed for the calibration and testing of pneumatic control boxes. With this APC, it is possible to generate a pressure or vacuum level to be reached instantly or with a predefined control ramp. In addition, an external sensor can be used to measure the pressure obtained. It is possible to check the calibration of a pneumatic control box with a complete hysteresis cycle, defining all the parameters of the adjustment process. The pressure data from the sensors is recorded and analysed to check the maximum permissible hysteresis, either as an absolute value or as a proportion of the movement of the control box. Different control configurations can be saved and reloaded on demand. The calibration control cycles are carried out via 3 ports, 2 inlets from the test bench supplying the APC box with dry and clean  ...

Counting scale Fabr. TOLEDO Type 4652 Specifications: Kns Ujikbg Herhyxksb Maximum load 20 kg Counting function 1:9 / 1:99 External dimensions approx. 650 x 350 x 600 mm

Straightening and welding plate 1000 x 800 mm A straightening and welding plate is sold. Manufacturer: Siegfried Weyrauch Dimensions: 1000 x 800 mm Auction-ID: A1-46872-5

1 gebr. Clamping table 600 x 600 mm

Auction-ID: A7-46410-46

New jaws for bison lathe chucks, and face plates

Measuringrange: from 0 - 100 mmin original caseReference: Hercegfi - Lot 73 Auction-ID: A7-46763-232

59 Pcs. Machine Feet / 7 Models - for leveling machines of all kinds - 23x 250/150/90 mm - 18x 200/120/100 mm - 6x 250/150/100 mm - 3x 240/100/80 mm - 4x 150/150/50 mm - 2x 250/115/70 mm - 3x 200/200/60 mm

Measuringrange: from 0 - 100 mmin original caseReference: Hercegfi - Lot 71 Auction-ID: A7-46763-231

Sell 9 used machine feet with rubber foot Thread M20 Diameter 200mm Good condition Shipping on request All prices are subject to 19% VAT

different manufacturersnew, 4 of which with digital displayMeasuring range: from 0 to 100 mmReference: Schmidt - Lot 131 Auction-ID: A7-46763-92

Flanges and Divereses

consisting of approx. 19 piecesMeasuring range: up to 150 mmdifferent manufacturersReference: Seitz and Strenger - Lot 18 Auction-ID: A7-46763-109

KNOLL Chip Conveyor + Coolant Tank for DMU 200 TYPE: 375 S-2/100 TOTAL LENGTH (mm): 4350 TOTAL WIDTH (mm): 1180 BELT DIMENSIONS (mm): 1840 x 375

for all other welding data see photographed nameplateReference: CES - Lot 87 Auction-ID: A7-46763-332

COOLANT UNIT for DMU 160P. General Aspects COOLANT TANK CAPACITY (L): 1.300 FILTER CAPACITY (L/MIN): 600 MOTOR: MOTOVARIO SW040 T 100 POWER (KW): 0,12

incl. welding torch set,pressure gauge and a welding torch hoseReference: Schiller - Lot 19 Dimensions: 700mmx700mmx1800mm Weight: approx. 120kg Auction-ID: A7-46763-190

Centricator CO-S Haff Schneider OVP New Centering Device Circle Zero Point Meter Total weight 770 grams More dimensions can be found in the pictures New and unused in original packaging. These are only open for viewing. Packaging with slight traces of storage You will receive an invoice in paper form. For this item, VAT (19 percent) is shown on the invoice. 24 65 86 F1204 (internal article number)

Measuring range: from 1 - 100 mmReference: Seitz and Strenger - Lot 75 Auction-ID: A7-46763-121

Chip protection booth - With safety switch - Doors on all 3 sides - Width: 200 cm - Depth: 75 cm - Height: 50 cm Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

Table dimensions: 320 x 320 mmWorking length: up to 500 mmReference: Hercegfi - Lot 76 Auction-ID: A7-46763-233

Tool holders SK30 - Approx. 60 spindle tools - Thread compensation holder - Approx. 40 collet holders Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

different designs and sizes, dimensions: 320x210x100mm, 440x420x60mm, 420x420x130mm Auction-ID: A7-46619-436

As good as new reversible base jaws Insert: Three-jaw chuck with helical toothing, also power chucks. Manufacturer: Three-jaw chuck FORKARDT-F400; RÖHM-Duro-400→ (FOKARDT; ROHM; SCHUNK; KITAGAWA) Name of the base jaws: for example: MFG 400; SFG400 Three-jaw wedge rod chuck ø 400mm: Hand chuck F400; F500L DURO400; DURO 500 Rota-S 400; Rota-S500 THW500 F B= width; H height; L= Length; S=N_backe; N= cross groove for interchangeable jaws; La= hole spacing; J=Za= tooth spacing; S= groove for top jaw or base jaw W = 45 mm H = 55 mm L = 160 mm N = 30mm S = 18mm La= 60mm Thread M16 x 1.5 Weight approx. 9-10 Kg /set

Straightening plate dimensions approx.: 2000x 1000mm, equipped with Quick-Boy III joint, incl. threaded screwdriver, make: Metabo; for more details see photos of the nameplates Auction-ID: A7-46619-239

2 New adapter cables for DRO Heidenhain 2 universal extension cables DRO

Total. 3 pieces, different makes and designs, dimensions: 730x550x700mm, 1000x300x100mm and 1000x50x150mm Auction-ID: A7-46619-440

Two drawer cabinets with roller drawers incl. accessories for CNC lathe Traub TNS30 are offered. Accessories e.g. Traub Adjusting Microscope Traub Adjustment Tool VDI30 Soft top jaws approx. 82 set (3 jaws each) approx. 5 driven tools (partially disassembled) approx. 80 tool holders Approx. 72 collets approx. 32 collets Lot of parting chisel Lot of turning chisels Post Milling Cutter Dial gauge Lot of centering drill bits Post of interchangeable tips for moving tips Lot of Inserts Lot of spare parts Traub Without the pictured 3-jaw chuck Cabinet Height 1m, Width 70cm Depth 70cm The photos do not show the complete scope of delivery. More photos on request or by visiting on site. Listing without guarantee! Sale price

Sizes: 290x280x90mm, 430x300x55mm, 600x500x100mm Auction-ID: A7-46619-437

Outer Ø: 310 mm Bore: 115 mm Chuck height with flange: 115 mm Height with clamping jaws 165 mm Clamping bolt spacing 120 mm Bolt D 27 mm- M16 new square safety spanner

The Fronius TR2200-F is a high-precision foot pedal for regulating the welding current in TIG welding. Functions according to the user manual: Stepless control of the welding current by foot pedal Command dial to set the maximum current Minimum current with unpressed pedal: 3 A Connection via LocalNet interface Extremely sensitive control travel → ideal for aluminium and thin sheet metal Compatible with many MagicWave, TransTig, TransPocket models Typical compatible devices (excerpt): MagicWave 1700 / 2200 / 2500 TransTig 1750 / 2200 / 2500 / 3000 TransPocket 2500 / 3500 / 4000 (TIG) Auction-ID: A1-46686-74

Warehouse number: 3691 CNC ROTARY TABLE Manufacturer: Hydex, Type: AT-250 - 5 Axis Year of construction: 2022 Specifications: Table size 250 mm Center Height 320 Spindle hole 75H7 mm CNC control 2 ashes revolutions 50 per min Control Fanuc-Mitsubishi-Siemens-Heidenhain

Dimensions: 605x505x110mm and 800x510x130mm Auction-ID: A7-46619-439

For sale comes: 1 used clamping/boring table Manufacturer: Skoda Type: E20OB22875 YEAR: 1989 Dimensions 2,000 x 2,000 mm Part weight: up to 25t electr. adjustable Mass: 10t

Model: Fronius RCU2000 Type: Control and control module for welding machines (TIG/Plasma) Features: Remote control of welding parameters Display of current, voltage, gas flow Compatible with Fronius TPS/TIG systems Weight incl. packaging approx. 5kg Auction-ID: A1-46686-30

mechan. Oil Mist Separators - Volume flow: up to 1200 m³/h - Electrics: 3-Ph. 400 V - 50/60 Hz - Power: 1.5 kW (IE3) - Current: 2.3 A - Protection class: IP54 - Noise: 70 dB

Large assortment of metal foils in various thicknesses and thicknesses; for more details see photos of the nameplates Auction-ID: A7-46619-461

EU pallet chassis, heavy-duty trolleys, transport scooters, dray Dimensions: width x length x height (approx. 82 x 122 x 46 cm) 4 heavy-duty roller wheels (2x swivel castors) Very stable steel frame with 4 protection angles) Portable with forklift It is sold as shown. All information without guarantee

Dimensions: 600x500x110mm and 795x600x120mm Auction-ID: A7-46619-438

various wedge shoes, set-up elements, machine feets

High-quality, modular measuring and adjustment station for precise measuring, testing and adjustment work. The heavy granite measuring table (approx. 500 × 400 mm) ensures high flatness, thermal stability and vibration damping. The cross stage has three measuring spindles, which enable sensitive positioning and reproducible settings. In combination with the stable height measuring stand and the digital Mitutoyo dial gauge, the setup is ideal for QA workstations, precision mechanics, toolmaking, fixture construction or laboratory applications.Equipment / Construction:    •    Granit e measuring table    •    Dimensions: approx. 500 × 400 x 90 mm    •    Cross table with three measuring spindles    •    X-axis: Micrometer  ...

Extension cable 3 meters for Sony digital display 2 square, price each EUR 70,-- plus VAT

Item: 2× digital iron-on micrometers (Mitutoyo + MMT)1) Mitutoyo digital micrometer 0–25 mm / 0.001 mmMeasuring range: 0–25 mmResolution: 0.001 mmManufacturer: MitutoyoTraces of use on the housing, functionalCondition: used, good2) MMT digital micrometer 50–75 mm / 0.001 mm (IP54)Measuring range: 50–75 mmResolution: 0.001 mmDegree of protection: IP54Hardly any signs of use, overall good conditionCondition: used, good Auction-ID: A7-46417-23