accessories for machine tools used for sale (2,180)

Cone gauges Morse Taper 2 Cone gauges Morse Taper 3 Cone gauges Morse taper 4 Cone gauges steep cone 30 Taper gauges steep cone 40 Test Mandrels Morse Taper 2 Test Mandrels Morse Taper 3 Test Mandrels Morse Taper 4 Test mandrels steep cone 30 Test Mandrels Steep Cone 40 Cone cleaner Morse taper 2 Cone cleaner Morse taper 3 Cone cleaner Morse taper 4 Cone cleaner steep cone 30 Cone cleaner steep cone 40

Mechanical filter Air volume: 2000 m³/h Device extraction capacity Colour: Light grey Electrical connection: 400V, 50/60 Hz 0.75 kW Footprint: 900 x 300 mm Weight: approx. 50 kg

diameter: 250 mmtool adaptor: 250 length: 700 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width: 900 mmdepth: 450 mmheight: 1800 mmweight: 0,152 tHigh quality professional tool cabinet.This cabinet consists of two separate boxes that are mounted on top of each othercan be. Both cabinets are 90 cm. high, 90 cm. wide and 45 cm deep.Both shelves are adjustable in height and can hold 150 kg eachShelves are loaded.The drawer cabinet is equipped with 6 drawers of 100 mm height. OneDrawer is 200mm high. Max. load per drawer is 100kg.All drawers are centrally locked.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Various fixed steady rests for lathes up to center height approx. 600 mm

various machine tables, angle tables, universal tables, clamping cubes, cube tables

Various milling heads for milling machines and gear cutting machines, hobbing machines

Key data: 50 mm

Precision grinding vise with pull-down or spindle. Hardened steel, rust resistant.

Key data: 600 mm, 400 mm, 90 mm

Electro-Permanent Magnet Clamping Plate Type 1150V-40/60-14

diameter: 315 mmbore diameter: 91 mmturning speeds: 4000 U/minweight of the machine ca.: 72 kgLike new 2 Jaw power chucks,- Quick change system- 1 set ground jawsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

EQUIPMENT: Fully Automatic Hydraulic Tire Changer Auxiliary arms Easy installation of low-profile, wide-width tyres or run-flat tyres Large clamping range up to 30 inches Ergonomic wheel jack Integrated "Tire Booster" tire inflation system High torque power supply and electrical feedback Voltage: 230V Precise motor speed control 0-14 rpm Special attachment points for mounting tires

Dürr / Ecoclean Minio 85C Year of construction 2003 The machine is used by us in 1 shift. Washing baskets: L x W x H 36 cm x 21 cm x 20 cm The dimensions of the system are L x W x H 2m x 1m x 2.65m The empty weight of the system is approx. 2,000kg. Location of the machines: 74219 Möckmühl The machines can be viewed on site at any time. They are in our warehouse and work perfectly. You can make an appointment for a viewing at any time before bidding on +49 (0) 72 55 / 39 73 337. We would love to hear from you.

surface area: 800455 mmno. of flutes: - groove width: - mmweight of the machine ca.: tdimensions of the machine ca.: mUniversal swivelling + tilting tableTable top rotatable 360 Tiltable forwards/backwards -15 / 45°Sideways swivelling +/- 30Cross adjustment ( Y ) 160 mmMounting surface 350 x 250 mm ( additional adapter plate )Table surface 800 x 455The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- RC200 integrated - drive package multidynamic - 1 x switchable vacuum/pneumatic circuit - 1 x compressed air circuit - electric supply network: 3x380V+N+PE/60HZ - compact electric cabinet mounted on Z-axis - incl. 4DI /4DO free programmable - han

Motors: no - Pneumatic axes Gripper rotation: Yes together with Z-axis Clamp tilting: No Clamp sprue : Yes Vacuum pupms: 1 Clamp control : Yes Euromap 12 - Stroke (Y): 700 mm - Stroke (X): 100 mm - Stroke (Z): 45-90 mm

- RC300 integrated - drive package multidynamic - 2 x switchable vacuum/pneumatic circuit - 1 x compressed air circuit - electric supply network: 3x380V+N+PE/60HZ - compact electric cabinet mounted on Z-axis - incl. 4DI /4DO free programmable - han

- Fully Automatic filling and storage systems with WITTMANN security PLC.

plus A-C servo axis only 3 year old, not used payload 5-7 kg with A-C payload 20 kg without A-C - Stroke (Z): 3.500 mm - Stroke (Y): 1.600 mm - Stroke (X): 900 mm - Driving method: plus A-C servo axis

- caliper rotation: 90 ? - B axis: electric 0-360 ? - assr C: pneumatic 0-90 ? (caliper rotation) - Compatible machine: up to 350 t - Stroke (Z): 3.000 mm - Stroke (Y): 1.600 mm - Stroke (X): 900 mm - Payload: 5 Kg - Driving method: 380 volt async

- Pneumatic axes - Gripper rotation: 90 ? - Interface: EUROMAP 12 - Stroke (X): 300 mm - Stroke (Y): 1.000 mm - Stroke (Z): 1.500 mm

- B axis: 0 ? -270 ? electric - C axis: 0 ? - 90 ? pneumatic - Control: Teach Box - Stroke (Y): 1.200 mm - Stroke (X): 550 mm - Stroke (Z): 2.000 mm - Driving method: servo

- caliper rotation: 90 ? - B axis: electric 0-360 ? - assr C: pneumatic 0-90 ? (caliper rotation) - Interface: EUROMAP 12 - Compatible machine: up to 350 t - Stroke (X): 900 mm - Stroke (Y): 1.600 mm - Stroke (Z): 3.000 mm - Payload: 5 Kg - Driv

- Tooling rotation: 0 ? -90 ? - X axis: 800 mm pneumatic - Y axis: 1000 mm pneumatic - Z axis: 2000 mm three-phase electric with inverter - Interface: Euromap 67 - Compatible machine: up to 150 t - Payload: 3 Kg

Used machine in good condition. Available for immediate delivery.

5 axis robot: 3 axes driven by servo motors, A movement, C axis Rides in the following axes: X-550, Y-1200, Z-2000 The servo inverters are built into the Z axis crossbeam Touch control panel - Teach Box - Weight: 255 kg - Control: Teach Box - Stroke (Y): 1.200 mm - Stroke (X): 550 mm - Stroke (Z): 2.000 mm - Payload: 10 Kg - Driving method: servo

- 7 axis - Complete cell sytem working on a CNC Punching Machine - Turn table sheet device - Fully automatic loading and unloading device - Safety fence Original cost of 100.000 EUR

Unused Control UNIROB B4 (8.4 TFT touch screen) X axis=1000 (39.4) with servo motor Y axis=1000+1000 (78.7) with servo motor Z axis=4000 (127.5) with servo motor Movement interpolation. Repetition accuracy of +/- 0.1 mm. Maximum weight including gripper: 20 kg. Pneumatic pressure: 6 bars Maximum speed: 3,000 mm/s. Interface: EUROMAP 67 - Interface: EUROMAP 67 - Control: UNIROB B4 - Stroke (X): 1.000 (39,4) with servo mm - Stroke (Y): 1.000+1.000 (78.7) with servo mm - Stroke (Z): 4.000 (127,5) with servo mm - Take-out speed: 3.000 mm/s - Payload: 20 Kg

tool taper: VDI 40 DIN 69880 number: 22 StückA range of tool holders in good condition.Tool holder size: VDI 40, DIN 69880Were used on a Gildemeister CTX 500 E CNC lathe.Quantity:1 driven tool holder, angled design.18 driven tool holders, straight design.3 standard tool holders.Only sold in a package!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece length - max.: 3000 mmfeed length: - mmlength: - mmpower capacity: 2 kWWeight: 1300 kgWith control panel HBG 10A guide channel, size of approx. 60 mm diameterThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

liter capacity: - ltotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: 0,8 x 0,6 x 0,6 mCoolant tank with pump, little used.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.