subcategories
(3rd category level)
Manufacturer:
(Category: 110)
Required air-pressure: 7 barweight: 3 kgdimensions of the machine ca.: 212 x 265 X 200 mm BxHxTAir Operated Diaphragm PumpType(s) DL15-PM-TTTTechnical data:- Connection size medium - 1/2 BSPT female thread- Material housing - PP polypropylene- Center section - PP polypropylene- Diaphragm material - PTFE- O-ring material - PTFE- Check valve material - PTFE- Max. flow rate - 2.2 m³/h- Max. medium pressure - 7 bar- Compressed air supply - up to 7 bar- Solid size max. - 2.5 mm- Dry suction max. - 2.5 m- Dimensions WxHXT - 212 x 265 X 200 mm- Net weight - 3.5 kgPTFE diaphragm for the highest chemical requirements, very good resistance to aggressive media and chemicals, temperature range: -5 °C - +130 °C.PP polypropylene housing is highly resistant to acids, many water-soluble, inorganic acids and bases. Also available as electrically conductive housing material. Temperature range: 0°C - + ...
Offer 26041 Technical data approx.: - Plate length approx. 3000 mm - Plate width approx. 2500 mm - Top height without base approx. 180 mm - Top height with base approx. 810 mm - Thickness of the top plate approx. 115 mm - 11 T-slots in table surface length 1500 mm - Center distance of the T-slots in the table surface 250 mm each - T - groove width approx. 40 / 22 mm - T - groove depth approx. 16 / 24 mm - Space requirements L 3500 x D 2500 x H 1100 mm - Weight approx. 4500 kg
Max. feed length: 2,600 mm Direct input of the dimension via touchscreen or via glazing bead calipers Profile slide can be folded up for insertion
Key data: 46 mm, 3250 mm
Year of construction 2014 Single-channel charging magazine with Vulkollan channel Remnant output into the machine room Servo drive Glass wrapping and axial displacement 1 guide channel set Vulkollan up to max. LW 46 mm incl. material slider with high-performance oil flow PLC control, integrated terminal with touch screen Manually adjustable material separation Loading area: 3250 x 370 mm Good condition
Hexagonal tower Dimensions 500 x 500 x 500mm Height 930 mm Base plate 630 x 630mm Grid 40mm Double angle dimensions: 630 x 200 mm, height 760 mm, base plate 630 x 630mm, grid 40mm Square tower Dimensions 400 x 400mm Height 930 mm Base plate 630 x 630mm Grid 40mm
Basic pallets for MAKINO A77 /81 Dimensions 630 x 630 mm with T-slot spacing 125mm Several available !
range L-W-H: 960 x 460 x 860 mmweight: 75 kg: 8 St.tool trolleywith tool set 272 pieces.See picturesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
range L-W-H: 960 x 460 x 860 mmweight: 75 kg: 7 St.Tool Trolley – 8 Drawers – Partially Equipped (6 Drawers)High-quality workshop trolley with 8 ball-bearing drawers, 6 of which are fully equipped with tools. The trolley is lockable and equipped with 4 sturdy casters (2 swivel, 2 lockable) for comfortable and safe operation. A robust polypropylene worktop completes the set.Features & Quality:– Ball-bearing, extendable drawers– Central locking mechanism / lockable– 4 casters (2 swivel, 2 lockable)– Tools made of chrome vanadium steel– Tools neatly stored in foam insertsDrawer 1Ratchet and socket sets 1/4, 3/8, and 1/2, including ratchets, universal joints, extensions, and short and long sockets (approx. 4–30 mm).Drawer 2Extensive ratchet accessories: Torx (with/without bore), Allen, slotted, Phillips (PH/PZ), spline, Ribe, and five-point – for 1/4, 3/8, and 1/2.Drawer 3O ...
diameter: 3 - 16 mmlength: 3000 mm= bar loading magazinfor bar-ø 3 - 16 mm, bar length 3000 mm, capacity for example 23 bars 8 mmøThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
New Spindle Oil Cooler for Emco Lathes Year of manufacture: 2023
As good as new chip conveyor from Bürener Suitable for Emco HT 45 lathe
liter capacity: ltotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Package Tool Holder VDI 30 Make: EWS Drill rod holder D= 8, 10, 12, 16, 20, 25, 32, 40mm Collet Holder ER 16, ER 25, ER 32 Turning steel holder outside left and right There are about 250 pieces available Also to be handed in individually Other images such as VDI 40, SK 40, HSK 63 and images on request
5x RÖHM machine vices For sale are a total of 5 high-quality machine vices of the RÖHM brand from professional industrial use. Ideal for CNC milling machines, machining centers and toolmaking. Scope of Delivery • 5x RÖHM RB4 incl. Crank Preferably sold completely as a set. ⸻ Technical data – RÖHM RB4 • Jaw width: 160 mm • Max. wingspan: approx. 310 mm • Clamping system: mechanical-hydraulic • High clamping force due to force amplification • Quick adjustment via stake-out bolts • Hardened and ground guides • Weight: approx. 57–60 kg per piece • Application: Milling machines / CNC machining Condition • Used • Optical signs of wear (paint chips, see photos) • Technically flawless and fully functional • Robust industrial quality from RÖHM
Offer 26038 The slab can be viewed at the 02943 Boxberg location by appointment. Technical data approx.: - Plate length approx. 3000 mm - Plate width approx. 2500 mm - Top height without base approx. 350 mm - Top height with base approx. 870 mm - Thickness of the top plate approx. 75 mm - 9 T-slots in table surface length 6000 mm - Center distance of the T-slots in the table surface 250 mm each - Center distance of the T-slots from outer edge 125 mm - T - groove width approx. mm - T - groove depth approx. mm - Space required: L 3000 x D 2500 x H 870 mm - Weight approx. 8000 kg
Offer 26037 Technical data approx.: - Plate length approx. 6000 mm - Plate width approx. 1800 mm - Top height without base approx. 360 mm - Top height with base approx. 870 mm - Thickness of the top plate approx. 75 mm - 6 T-slots in table surface length 6000 mm - Center distance of the T-slots in the table surface 250 mm each - Center distance of the T-slots from outer edge 125 mm - T - groove width approx. mm - T - groove depth approx. mm - Space required: L 6000 x D 1850 x H 870 mm - Weight approx. 11000 kg
plate width: 1500 mmplate depth: 4200 mmplate height: 350 mmtotal power requirement: kWweight of the machine ca.: 5 trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
power capacity: kWfeed pressure: 16 barliter capacity: 500 ltotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mAir compressorOperating temperature TS min 10 TS max. 50 degreesThe technical data is provided by the manufacturer or operator and is thereforenon-binding for us. We reserve the right to prior sale, our terms and conditions of business and sale apply exclusively.About us:More than 400 of our own machines in stockOver 15,000 m² of warehouse space, 70-ton crane capacityMore than 10,000 accessories for your workshopIf you want to sell machinery, production lines, or your business,please contact us.Further offers can be found on our website.Viewings are possible by appointment.We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CNC NUM 760 full cnc visible in our warehouse in Gussago BS Italy
1 set = 3 new centring units, zero point system, Micro grip 50, Parotec, new Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - Comes from a spare parts warehouse of a certified production facility, - is in its original packaging, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court location St. Pölten.
The machine comes from a warehouse liquidation. Unfortunately, no further technical information is available. It was not possible to check the function. The weight is approx. 2,500 kg.
Key data: 610 mm, 500 t
From MTrent Machining Centers UE 110-5A Year of construction 2012 Diameter 610 mm With extended clamping surface 1100 x 610 mm Weight 850 kg
Cover Protective Cover for FP3 CNC - Splash guard booth for Deckel FP3 milling machines - Distance fastening screws: 910 mm - Dimensions WxHxD: 1270 x 1300 x 950 mm - Weight: approx. 80 kg
A cassette set of bending tools for FASTI MAK
TRUMPF TruDisk 3006 6C laser source was built in 2016 in Germany by TRUMPF Laser GmbH. This extremely versatile device enables a wide range of industrial machines to be supplied with a high-quality 3 kW laser beam. The beam has many applications in modern industry. It can be used to both weld and cut sheet metal made of, e.g. steel, copper, brass and highly reflective materials. Active laser power control guarantees 100% constant power over the entire service life of the device, regardless of ambient conditions. All components, i.e. beam guide, current supply, cooling system and control system, are of modular design. They have been optimally adapted to each other inside the compact housing. The small size of the housing also enables the device to be easily integrated with, e.g. robotic systems. All this makes the offered TRUMPF 3006 laser resonator extremely reliable and robust under ...
Key data: 360 mm, 360 mm, 870 mm
4 side tensioning tower with a height of 870 mm incl.
Offer 25435 Specifications: - Plate length approx. 3500 mm - Plate width approx. 1750 mm - Plate height approx. 350 mm - Left + right screwed rectangular tube 200 mm each - Thickness of the top plate approx. 80 mm - 6 T-slots in table surface length 3500 mm - Center distance of the T-slots in the table surface 250 mm each - Center distance of the T-slots from outer edge 125 mm - T - groove width approx. 35 / 60 mm - T - groove depth approx. 60 mm - Space required: L 3500 x D 2100 x H 350 mm - Weight approx. 4200 kg
Key data: 160 mm
Safeway PHV 160 - Hydraulic Machine Vise - Hydraulic vise with hand crank Specifications - Jaw size: 160 x 60 mm - Wingspan: 300 mm - Clamping force: 4100 kg - Mounting hole spacing/Ø: 200 / 18 mm - Dimensions LxWxH: approx. 740 x 240 x 150 mm - Weight: approx. 60 kg
