подкатегории
(уровень третий категории)
Производитель:
(Категория: 110)
Ширина материала: 650 мм Толщина материала: 0,8 - 5 мм Скорость подачи: 8 м/мин. Общая потребность мощности: 10 кВт вес машины ок.: 1,5 тШирина материала: 650 ммТолщина материала: 0,8 – 5,0 ммСкорость подачи: 8 м/минОбщая потребность мощности: 10 кВт. Масса машины: примерно 1,5 тДанные для этой рекламы были созданы с помощью ModulMWS — программного решения LogoTech oHG.
grinding length: 600 mmgrinding width: 400 mmworkpiece height: 375 mmworkpiece weight: 400 kgtable longitudinal travel: 650 mmtable speeds: 2 - 28 m/mintable cross travel: 400 mmspeed: 100 - 1000 mm/mingrinding wheel size: 300 x 50 x 76,2 mmgrinding spindle drive: 3,7 kWperipheral speed: 10 - 32 m/sectotal power requirement: 11 kWweight of the machine ca.: 2,1 tdimensions of the machine ca.: 2,95 x 2,65 x 2,47 mCNC Precision Surface Grinding MachineTable drive: hydraulicCross-axis drive: electromechanicalElectromagnetic plate: 600 x 400 mm with holding force control and automaticmagnetic pole reversal for demagnetizingFeatures:Partially enclosed, open-topped loading compartment with a sliding doorCleaning kit for cleaning the work area with hand-held impulse nozzleHolder for prism arm with single-point diamond, MK 0Grinding spindle speed control with V-constant controllerUniversal paper ...
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
feed pressure: 0 barliter capacity: 0 lpower capacity: 4 kWoperating pressure: 150 bar: weight of the machine ca.: 200 tdimensions of the machine ca.: 1,1 x 0,7 x 1,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
tool taper bore: FETTE number: 2 thread pitch: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
liter capacity:21 l/minPressure of coolant:50 barrated current:20 AClean water tank capacity:300 ltotal power requirement:16 kWweight of the machine ca.:200 Kgdimensions of the machine ca.:1,2 x 0,8 x 1,4 mWe are importers for FRASCARA high pressure coolant systemsFrascara delivers compact, mobile and reliable high pressure coolant / filtering systems with 50 or 70 bar 21 l/min.We can provide up to 3 pressure levels controlled by M-Functions.Oil operated systems are available also.Areas of application:Cleaning of coolant lubricants, emulsions and cutting oils without filter residues. Installation on machine tools for individual machinesFunction:The lifting pump inside the machine tank with minimum 2bar / 20 l/min capacity presses the contaminated water through the twin filter unit into the clean water tank. of the Frascara unit, from where it is pumped back through the spindle by a 50 ba ...
faceplate diameter:450 mmweight of the machine ca.:0,15 tdimensions of the machine ca.:0,5 x 0,5 x 0,2 mBore:130 mm
We are selling a new unused but defective tool magazine with tool changer for a Makino PS 95.The magazine body was broken in two parts with a crane hook during unloading of the machine from its transport box.Also some tool pots are damaged.Can be repaired or used as spare parts
Tool holder type:Weldon 16 mm Tool holder shaft type:DIN 69880 E2-40 x 16 Shank diameter:40 mmlength:75 mm90° angle rotary tool holder BMT 40There are two units available. Both are like new and never used.External coolant up to 80 bar.
size of pallet:400x400 mmnumbers of pallets:15 table load:400 kgweight of the machine ca.:0,060 tdimensions of the machine ca.:0,4 x 0,4 m15 pallets for Makino A 55, size 400 x 400 with T-slots for sale
length in total:1200 mmband width:500 mmconveying height:1200 weight of the machine ca.:1 tdimensions of the machine ca.:4,0 x 1,5 x 2,2 mswarf conveyor with coolant attachmentTexte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht.Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt.Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt.Copyright © 2005-2024, Josef Weber. All rights reserved.
length:1000 mmwidth:800 mmweight of the machine ca.:0,7 tdimensions of the machine ca.:1,0 x 0,8 x 1,4 mHardstone measuring plate complete with FISCHER tailstocks and 4 leveling elements.
diameter:500 mmtool adaptor:50 Weight:12 kgface movement each head:82 mmfeeds:0,06 mm/U
feed pressure:13 bartotal power requirement:3 kWweight of the machine ca.:0,15 tdimensions of the machine ca.:1,0 x 0,8 x 1,2 mHigh pressure air cooling device
tool taper:40 weight:0,1 tAppr. 60 ISO 40 NC arbors with various clamping shaftsPackage selling or individual possible, min. 5 pieces
floor-plate length:6000 mmfloor-plate width:2000 mmfloor-plate height:460 mmweight of the machine ca.:12,5 tdimensions of the machine ca.:6 x 2 x 0,46 m
floor-plate length:6000 mmfloor-plate width:2000 mmfloor-plate height:460 mmweight of the machine ca.:12,5 tdimensions of the machine ca.:6 x 2 x 0,46 m
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
10 € 
