Manufacturer:
The distance indication is not possible, because your location could not be determined. Prerequisite is that your browser allows cookies and location determination.

Manufacturer:
(Category: 110-1140)

AFS 1
accessories for machine tools / Exhaust extraction systems
date: 02.01.2024 add to watchlist
approved
dealer
item-No.: 151339424
New in: 2010

used

check Seller: Maschinenservice
Location: Land-de
Price: 1.299 € add to watchlist

AFS 4000 Air Purify AFS 4000 Air Purify all separation and filter elements as well as with connection for cooling lubricant recirculation Air capacity:4,000 m3/h Device suction capacity Rated electrical data: 3, 380...480 V, 50/60 Hz2.68 kW, 4.1 A, Power consumption:2.2kW, operating point Weight:approx. 150kg Dimensions 800mm wide 1800mm long incl intake nozzle1050mm high Suction mares 4 pieces each approx. 200mm diameter Suction nozzle shut-off valve diameter 150mm

accessories for machine tools / Exhaust extraction systems
date: 11.04.2024 add to watchlist
approved
dealer
item-No.: 163526820
New in: 2020

used

check Seller: ZIEGLER Maschinenwelt GmbH
Location: Land-at
VS

add to watchlist

Aigner Air Jet 4 - Abrasive dust extraction Dry sanding of various materials often produces dust that is harmful to health. An effective solution for this is the use of an abrasive dust extractor. This device reduces dust emissions and helps to comply with the particulate matter limits: 5 mg/m³ in Austria and 1.25 mg/m³ in Germany. - Aigner Air Jet abrasive dust extraction - EC pipe extraction arm - Powder extinguishing system with detection line - incl. documents - Year of construction 2020 Specification - Max. air flow: 5000 m³/h - Max. pressure: 5000 Pa - Filter: 4x 13 m² - Dust: 10 g/m³ - Nominal power/current: 7.5 kW / 35 A - Nominal voltage: 3x 400 V - Net weight: 560 kg

accessories for machine tools / Exhaust extraction systems
date: 24.01.2024 add to watchlist
approved
dealer
item-No.: 160192139

used

check Seller: MaTraCom e.K.
Location: 70469 Stuttgart Land-de
Price: VB 600 € add to watchlist

Oil mist separator, extraction system, oil mist extraction, suction Brand ANAG Dimensions: wxlxh 55x68x50cm 230V, 50 Hz Quantity: 2 The price is net and is valid for 1 piece.

accessories for machine tools / Exhaust extraction systems
date: 21.11.2023 add to watchlist
approved
dealer
item-No.: 153139987

new

check Seller: VEI-Engineering GmbH
Location: Land-de

add to watchlist

1 pc. Dassler high-pressure centrifugal fan is for sale single inlet with sheet steel housing with the following performance parameters: condition: new, unused type: DCAS-852-2T-10 suction DN: 280 power: 7.5 kW air volume: approx. 4300 m3 / h speed: 2800 rpm air temperature conveyed: -20 to + 120 ° C motor: insulation class F / protection class IP55

accessories for machine tools / Exhaust extraction systems
date: 13.07.2023 add to watchlist
approved
dealer
item-No.: 161854922
New in: 2003

used

check Seller: CNC-Technik Friedrich
Location: 08309 Eibenstock Land-de

add to watchlist

Oil mist extraction Handte OE-DAV 1-0,18 Year of construction: 2003 Air volume: 1,000Bm³/h Filter area: 0,18m² incl. stand

accessories for machine tools / Exhaust extraction systems
date: 12.04.2024 add to watchlist
approved
dealer
item-No.: 162688132

used

check Seller: Christoph Busch GmbH
Location: Land-de

add to watchlist

Dimensions (L/W/H): . mmFilter capacity: . m²Number of filters: . St.: 929063 rated current: 2,0 : 1,200 m³/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

accessories for machine tools / Exhaust extraction systems
date: 12.04.2024 add to watchlist
approved
dealer
item-No.: 163786560
New in: 1999

used

check Seller: Gebr. Engelfried oHG
Location: Deutschland
Price: 3.000 € add to watchlist

Dimensions (L/W/H): mmFilter capacity: m²Number of filters: St.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

accessories for machine tools / Exhaust extraction systems
date: 29.12.2023 add to watchlist
approved
dealer
item-No.: 162335459
New in: 2010

used

check Seller: RVM heavy machines
Location: Land-de

add to watchlist

Machine No. 180202

accessories for machine tools / Exhaust extraction systems
date: 12.04.2024 add to watchlist
approved
dealer
item-No.: 161601218

used

check Seller: KIRCHGEORG Werkzeugmaschinen GmbH
Location: Dreieich Land-de

add to watchlist

diameter: 250 mmdiameter: 250 mmnumer of jaw: 4 Stücknumer of jaw: 4 Stückbore: Ø 75 mmbore: Ø 75 mmthickness of jaw: 23 mmthickness of jaw: 23 mm: 41 mm: 41 mmtool adaptor: KK6 DIN 55027tool adaptor: KK6 DIN 55027weight: 32 kg- Serial-No.: 01330- Flat spiral chuck- Jaws centrically clamping and individually adjustable- with chuck keyThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

accessories for machine tools / Exhaust extraction systems
date: 22.02.2024 add to watchlist
item-No.: 163415544

used

Seller:
Location: Land-de
Price: 1.350 € add to watchlist

good condition, little use, no shift operation

accessories for machine tools / Exhaust extraction systems
date: 12.04.2024 add to watchlist
approved
dealer
item-No.: 163739008

used

check Seller: KIRCHGEORG Werkzeugmaschinen GmbH
Location: Dreieich

add to watchlist

table diameter: 250 mmtable height: 110 mmweight: 51 kgdimensions of the machine ca.: 550 x 340 x 170 mm- Rotary table can be set up vertically or horizontallyThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

accessories for machine tools / Exhaust extraction systems
date: 08.04.2024 add to watchlist
approved
dealer
item-No.: 158965884
New in: 2007

used

check Seller: Mieth Maschinenhandel
Location: Land-de

add to watchlist

Specifications: - Boom length approx. 6 m - 5 joints - Suction pipe diameter 125 mm - Wall connection – console - Weight approx. 100 kg

accessories for machine tools / Exhaust extraction systems
date: 08.05.2023 add to watchlist
approved
dealer
item-No.: 158321830
New in: 2004

used

check Seller: MS-Schöllchen Werkzeugmaschinenhandel GmbH
Location: Land-de

add to watchlist

TEKA extraction system The filter device TEKA - PF/S was used for the extraction of graphite dust. It has been cleaned and is in very good condition. An operating manual is available.

accessories for machine tools / Exhaust extraction systems
date: 12.04.2024 add to watchlist
approved
dealer
ankerimg
item-No.: 159762818

used

Location: Land-de

add to watchlist

diameter: . mmCutting (quantity): . 0weight: . kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

accessories for machine tools / Exhaust extraction systems
date: 12.04.2024 add to watchlist
approved
dealer
item-No.: 161052381

used

Location: Land-de

add to watchlist

Heat output capacity: . KWair volumen: . m³/hweight of the machine ca.: . tdimensions of the machine ca.: . mTank size: 900x500x350 mmThe techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

accessories for machine tools / Exhaust extraction systems
date: 12.04.2024 add to watchlist
approved
dealer
item-No.: 162382386

used

check Seller: Christoph Busch GmbH
Location: Scherfhausen Land-de

add to watchlist

length: 1000 mmwidth: 80 mmheight: 620 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

accessories for machine tools / Exhaust extraction systems
date: 02.01.2024 add to watchlist
approved
dealer
item-No.: 144964666

used

check Seller: Maschinenservice
Location: Land-de
Price: 1.000 € add to watchlist

Sell a mobile suction system. Well suited for double grinding brackets, tool grinding machines Suction comes from a laboratory workshop and came for sale because of the site closure Dimensions 660mm680mm1900mm High top suction pipe Weight150Kg Ffirn32r Extraction capacity 1250m3/h Energy demand 1.1Kw

accessories for machine tools / Exhaust extraction systems
date: 16.01.2024 add to watchlist
approved
dealer
item-No.: 146259402
New in: 2009

used

check Seller: WTS Maschinenhandels GmbH & Co. KG
Location: Land-de
Price: VB 1.900 € add to watchlist

complete device Flow temperature max 55 C° Engine 1.05kW-230/400V 50 Hz was attached to DMG MORI we have even more suction systems. Please ask.

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information