subcategories
(3rd category level)
Manufacturer:
(Category: 110)
length: 3000 mmwidth: 1050 mmheight: 2500 mmcarrying capacity for each setting space: tnumber of setting places: 9 weight of the machine ca.: tdimensions of the machine ca.: 3,0 1,05 x 2,5 mTwo heavy dutyrackPrice for each.can be sold individuallyThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
diameter: 0 - 800 mmtool adaptor: MK 6 Slide cross: 140 mmWeight: - kgBox Set Boring Head WohlhaupterMK-AdaptorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 250 mmtable height: 100 mm4-jaw-chuck diameter: 200 mmweight: 60 kgdimensions of the machine ca.: 370 x 500 x 210 mm- Serial-No.: 6568- 4-jaw chuck RÖHM Ø 200 mm- Chuck optionally with 30° pitch, or infinitely variable 360° rotation- Chuck keyThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
volume capacity: 5,63 m³/minsuction: 1 barpressure: 8 barturning speeds: 3000 U/minengine output: 37 kWdimensions of machine L x W x H: 1,35 x 1,05 x 1,43 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 4000 mm, 2000 mm, 12 t
Plate panel, clamping plate with T-slots unused, as good as new Size: 4000 x 2000 x 300 mm Material: Cast ribbed 8 T-slots 28 H12 in longitudinal direction Distance between T-slots 250 mm 8 threaded holes M24 for adjustment Pockets on all sides for connecting the panels Weight: approx. 5,500 kg
weight: . kgtaper MK: . height: 700 mmflute distance: 255 mmthickness of jaw: 80 mmJaw extension with claw boxes for carousel latheJaw height 80 mmJaw width 80 mmGroove spacing 255 mmHeight 700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Required air-pressure: 7 barweight: 3 kgdimensions of the machine ca.: 212 x 265 X 200 mm BxHxTAir Operated Diaphragm PumpType(s) DL15-PM-TTTTechnical data:- Connection size medium - 1/2 BSPT female thread- Material housing - PP polypropylene- Center section - PP polypropylene- Diaphragm material - PTFE- O-ring material - PTFE- Check valve material - PTFE- Max. flow rate - 2.2 m³/h- Max. medium pressure - 7 bar- Compressed air supply - up to 7 bar- Solid size max. - 2.5 mm- Dry suction max. - 2.5 m- Dimensions WxHXT - 212 x 265 X 200 mm- Net weight - 3.5 kgPTFE diaphragm for the highest chemical requirements, very good resistance to aggressive media and chemicals, temperature range: -5 °C - +130 °C.PP polypropylene housing is highly resistant to acids, many water-soluble, inorganic acids and bases. Also available as electrically conductive housing material. Temperature range: 0°C - + ...
floor-plate length: 9000 mmfloor-plate width: 3000 mmfloor-plate height: 400 mmT-slot - width: 32/56 mmT - slots distance: 335 mmnumber of T-slots: 9 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bearing diameter: 120 mmmotor: Synchronmotor Nominal turning speed: 3000 1/minMaximum turning speed: 4000 1/minTorque: 76,4 Nmcurrent: 38 AThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
range L-W-H: 1066 x 460 x 940 mmweight: 80 kg: 12 St.Mobile tool trolley, scope of delivery:Top drawer dimensions 954 x 400 x 134 mmDimensions of the left drawers 569 x 400 x 75 mm | 569x400x154mmDimensions of the right drawers 296 x 400 x 75 mm | 296x400x233mmDiameter rolls 12.5 cmWidth of rolls 3.2 cmMaximum loadable weight of the large drawer is 35 kgMaximum loadable weight of the narrow drawer is 20 kgMaximum loadable weight of the tool trolley is 350 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Pneumotec Workpiece Accumulator PWS 100 Year of construction: 06/2013 Plate diameter 220 mm Number of plates: 20 pieces Height 1200 mm +/-100 mm adjustable Width 780mm Length 3150mm
amount: 39 STKChange gear set for Reishauer NRK.Change gears - number of teeth:- 26 / 28 / 28 / 32 /39 / 40 / 41 / 42 / 42 / 42 / 45 / 45 / 47 / 47 / 48 / 48 / 49 / 50 / 50 / 50 / 50 / 51 / 52 / 56 / 56 / 57 / 60 / 60 / 62 / 63 / 63 / 63 / 64 / 70 / 72 / 74 / 75 / 76 / 77 / 80 / 80 / 84 / 90 / 105 / 112 / 112 / 127The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
amount: 9 STKChange gear set for Reishauer NRK.Change gears - number of teeth:- 26 / 28 / 28 / 32 /39 / 40 / 41 / 42 / 42 / 42 / 45 / 45 / 47 / 47 / 48 / 48 / 49 / 50 / 50 / 50 / 50 / 51 / 52 / 56 / 56 / 57 / 60 / 60 / 62 / 63 / 63 / 63 / 64 / 70 / 72 / 74 / 75 / 76 / 77 / 80 / 80 / 84 / 90 / 105 / 112 / 112 / 127The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
amount: 63 STKChange gear set for Reishauer NRK.Change gears - number of teeth:- 26 / 28 / 28 / 32 /39 / 40 / 41 / 42 / 42 / 42 / 45 / 45 / 47 / 47 / 48 / 48 / 49 / 50 / 50 / 50 / 50 / 51 / 52 / 56 / 56 / 57 / 60 / 60 / 62 / 63 / 63 / 63 / 64 / 70 / 72 / 74 / 75 / 76 / 77 / 80 / 80 / 84 / 90 / 105 / 112 / 112 / 127The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
amount: 13 STKChange gear set for Reishauer NRK.Change gears - number of teeth:- 26 / 28 / 28 / 32 /39 / 40 / 41 / 42 / 42 / 42 / 45 / 45 / 47 / 47 / 48 / 48 / 49 / 50 / 50 / 50 / 50 / 51 / 52 / 56 / 56 / 57 / 60 / 60 / 62 / 63 / 63 / 63 / 64 / 70 / 72 / 74 / 75 / 76 / 77 / 80 / 80 / 84 / 90 / 105 / 112 / 112 / 127The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
amount: 26 STKChange gear set for Reishauer NRK.Change gears - number of teeth:- 26 / 28 / 28 / 32 /39 / 40 / 41 / 42 / 42 / 42 / 45 / 45 / 47 / 47 / 48 / 48 / 49 / 50 / 50 / 50 / 50 / 51 / 52 / 56 / 56 / 57 / 60 / 60 / 62 / 63 / 63 / 63 / 64 / 70 / 72 / 74 / 75 / 76 / 77 / 80 / 80 / 84 / 90 / 105 / 112 / 112 / 127The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
amount: 107 STKChange gear set for Reishauer NRK.Change gears - number of teeth:- 26 / 28 / 28 / 32 /39 / 40 / 41 / 42 / 42 / 42 / 45 / 45 / 47 / 47 / 48 / 48 / 49 / 50 / 50 / 50 / 50 / 51 / 52 / 56 / 56 / 57 / 60 / 60 / 62 / 63 / 63 / 63 / 64 / 70 / 72 / 74 / 75 / 76 / 77 / 80 / 80 / 84 / 90 / 105 / 112 / 112 / 127The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: Sameca Type : MUZ.6.6 Year of construction 1996
Diameter: 710 mmNumber of teeth: . St.Width of teeth: 6 mmBore: 80 mm: 120 mmThickness: 5 mmnumber: 30 St.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Transport length: 2800 mmband width: 270 mmdayligth: 450 mmwidth: 280 mm0: 1200 mmtotal power requirement: kWweight of the machine ca.: 0,75 tdimensions of the machine ca.: 4,4x0,4x1,6 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
thickness of jaw: 200 mmweight: 106 kgdistance of clamping jaw max.: 195/382 mmdimensions of the machine ca.: 870/1230 x 200 x 170 mmNote: without crank !The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Clamping range Ø 15–160 mm Max. workpiece weight 15 kg Weight of the prism vise 3.0 kg
1x VDI 40 steel bracket holder C4 C4-RC2040-51030 L= ; B= ; WeightG:= 3kg 2.2)58760 Cylindrical C4 adapter diameter 50x90mm 9x Inner Extractor Bracket 10x External Swivel Holder 3x outer piercing holder visible as far as possible 1) C4_R166_4KF-12060 Female Thread Swivel Holder 2) C4-B_SNR-27042-12 3) C4-R166.4FGZ-27050-16 External Rotary Bracket Right Triangular Plate : 4) C4-SDJCR-27050-11 External Swivel Bracket Right Triangular Plate 5) C4-DSSNR-27042-12 External swivel holder right 1x with plate, clamped from above 6) C4-SVJBR-27050-16 External swivel bracket right 1x with insert, Torx screws 7) C4-SDUCR-13080-11 Coro Turn Drill Rod, Internal Rotary Square Plate-Torx Sxamuk 8) C4-PCLNR-17090-12 Internal torque with clamping 9) C4-SVQBR 13090-16 Internal Rotary Holder Copy Plate 10) 3pcs C4-RF15.1230-G20-27050B & 27060B Cut-off holder sword Shipping costs on re ...
Offer different straightening plates, tool tables with the following dimensions and prices: Straightening table 1 with feet: 3500 x 1500 mm, 4.000 kg, price € 3.200,- Bkxzorwqgc8 Straightening table 2 with feet: 2000 x 1500 mm, 1.500 kg, price € 2.200,- Straightening table 3 with feet: 2000 x 1000 mm, 1.200 kg, price € 1.600,- Straightening table 4, one foot missing: 2810 x 600 mm, 900 kg, price € 1.000,-
Key data: 300 mm, 200 mm, 70 mm
Scribing plate With grooves Condition: Good
Key data: 500 mm, 500 mm, 90 mm
Scribing plate tap and piston Used Condition: Good
Key data: 800 mm, 500 mm, 110 mm
Scribing plate C.Stiefelmayer Good condition
As good as new reversible base jaws Insert: Three-jaw chuck with helical toothing, also power chucks. Manufacturer: Three-jaw chuck FORKARDT-F400; RÖHM-Duro-400→ (FOKARDT; ROHM; SCHUNK; KITAGAWA) Name of the base jaws: for example: MFG 400; SFG400 Three-jaw wedge rod chuck ø 400mm: Hand chuck F400; F500L DURO400; DURO 500 Rota-S 400; Rota-S500 THW500 F B= width; H height; L= Length; S=N_backe; N= cross groove for interchangeable jaws; La= hole spacing; J=Za= tooth spacing; S= groove for top jaw or base jaw W = 45 mm H = 55 mm L = 160 mm N = 30mm S = 18mm La= 60mm Thread M16 x 1.5 Weight approx. 9-10 Kg /set
Klaus Rosenboom GmbH
