used Lathe Chucks for sale

Self-centering 4 jaw lining NEW Bearings: 315 mm type 3704 400 mm type 3704 400 mm type 3744-11

Plan disc Bison New in original packaging

Hand chuck three-jaw chuck FORKARDT, Type:315 Supplied with / without clamping flange Flange for milling or drilling table (option 150,00€) Three-jaw lining: cyl. Flange mount ø 300 mm, Bore diameter approx. 80 mm Included in delivery: short, modified FORKARDT base jaws FGB-315 with reversible top jaws. The mounting flange can be fixed on the milling or drilling table. Other DIN flanges on request The lining is cleaned and tested. Jaw guide, spindle and scenery stones are in good condition. Countertop jaws with clear signs of wear. Other clamping jaws are available on request. ( Option) Due to the weight, freight forwarding is required. Price within Germany incl. packaging approx. 100,00€

Hand chuck three-jaw chuck FORKARDT, Type:FG315 Supplied with clamping flange Flange for milling or drilling table Three-jaw lining: cyl. Flange mount ø 300 mm, Bore diameter approx. 80 mm FORKARDT Basic Jaws FGB-315 with reversible top jaws. Mounting flange manufacturer FORKARDT DIN 55027 J6 Other DIN flanges on request The lining is cleaned and tested. Jaw guide, spindle and scenery stones are in good condition. Other clamping jaws are available on request. ( Option) Due to the weight, freight forwarding is required. Price within Germany incl. packaging approx. 100,00€

used-tested base jaws for three-jaw chuck - wedge rod chuck size approx. ø 315mm for power chucks on request Manufacturer: (FORKARDT-RÖHM-SCHUNK_KITAGAWA) Base jaws in good functional condition: Base jaw type: Helical toothing Metrics: Width: 32 mm Length: 125mm Height: F-groove: 12mm Bridge: 26mm Hole spacing: 54mm Thread: M12 x 1.5 mm Weight / per set: 3.5kg Supplied with or without screws There are several sets in stock. (New or tested-used)

As good as new reversible base jaws Insert: Three-jaw chuck, helical toothing, Manufacturer for example: FORKARDT,RÖHM ,SCHUNK;,SMW-Autoblock Power chuck type on request? Designation of the base jaws FGB-630; FGB630 (FORKARDT) for the construction of commercially available, reversible, hard top jaws Three-jaw wedge rod chuck ø 6300mm: Hand chuck F630, Duro630; THW630 B= width; H height; L= Length; S=N_backe; N= cross groove for interchangeable jaws; La=hole spacing; Za = tooth spacing; S= Groove (top jaw) base jaw W = 65 mm H = 62 mm L = 230 mm N = xx mm S = 24mm La= 82mm Thread M20 Weight approx. 8-10 Kg /piece Price on request:

Three-jaw chuck diameter 240mm

very good three-jaw chuck centrically exciting øA= 315 mm ø I= 100 mm cylindrical receptacle Chuck flange DIN 55027 on request incl. as good as new drill jaws Swivel jaws on request Forwarding or pick-up

Turning chuck RÖHM Diameter 160 mm 3- Baking max. 3600 rpm as good as new !

Four-jaw lining ø 500 mm very good condition Spindle holder with base baking and top baking

Original packs a set

used-tested base jaws for three-jaw chuck - wedge rod chuck size approx. ø 250mm for power chucks on request Manufacturer: (SMW Autoblock; SCHUNK; KITAGAWA; REISHAUER) Base jaws in good functional condition: KNCS250; QJ310; RHU250; THW; Schunk-Rota G250 Base jaw type: Helical toothing Metrics: Width: 26 mm Length: 104mm Height: F-groove: 12mm Bridge: 20mm Hole spacing: 40mm Thread: M12 Weight / per set: 3.5kg Supplied with or without screws There are several sets in stock. (New or tested-used)

Power chuck øOuter 800mm • Centrifugal force compensation for high spindle speeds • Proofline® chuck = fully sealed – low maintenance STANDARD EQUIPMENT • Chuck: 1 set of soft attachment jaws, see picture • 1 compensating stroke regulating wrench • Low maintenance 6-jaw power chuck with 2+2+2 tension. The high-precision machining of thin-walled components. The 2+2+2 compensation mechanism of the chuck Enables the clamping of thin-walled components Clamping force to 6 points, reduces radial deformation. - Centrifugal force compensation for high speeds; -Low maintenance and other benefits The mounting flange is A2-KK15

As good as new reversible base jaws Insert: Three-jaw chuck of parallel toothing, Manufacturers, for example: SCHUNK; SMW Autoblock Power chuck on request? Designation of the base jaws GBK-500; GBK500 (SMW-Autoblok-SCHUNK, BERG) for the construction of commercially available reversible, interchangeable jaws Three-jaw wedge rod chuck ø 500mm: KNCS 500 manual chuck; THW500 B= width; H height; L= Length; S=N_backe; N= cross groove for interchangeable jaws; La=hole spacing; Za = tooth spacing; S= Groove (top jaw) base jaw W = 45 mm H = 57 mm L = 160 mm N = 30mm S = 18mm La= 60mm Thread M16 x 1.5 Weight approx. 9-10 Kg /set Price on request:

Clamping device with 3 pcs claw box double acting to compensate for material elongation during welding or heat development by working process New condition of the three claw boxes with screwed-on Interchangeable plate jaw system and hardened screwed clamping jaws . Size : Claw box; approx. 50 cm x 25cm (box) x 15 cm movable support part: approx.31 x23 cm Alternate plates size approx. 31 x 23 cm x height from 18 to 23 cm Spindle adjustment path. approx. 130 mm , voltage by spindle with compression spring preload system Accessories: 6 sets of alternating plate jaws as good as new