Key data: 380 mm
Max. cutting length: 4,500 mm Max. saw blade diameter: 380 mm Manual length adjustment with digital display E111 Cutting area at 90°: 195 x 120 mm Cutting area at 45°: 135 x 120 mm Minimum quantity spraying device Pneumatic material tensioners Mitre cuts possible on both sides 2-hand operation Machine is dismantled on squared timber
cutting diameter: 500 mmcutting length: 5000 mmsaw blade diameter: 420 - 500 mmdimensions: ca.6400 x 1500 x 1600 mmweight: ca. 1600 kgfeed: stufenlos digital readout: Motorized length adjustment with digital displaymanual and spare part list includedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inv. Num. : 8951 Type: TDC 622 EDGE MASTER Producer: MECAL Created: 2023 Parameters: Maximum sawing speed: 2400 1/min Cutting length: max. 6000 mm Engine power: 13.5 kW Machine weight: 3200 kg
Key data: 550 mm
Max. saw length: 6,000 mm Smallest cutting length: 335 mm Max. saw blade diameter: 550 mm Automatic length positioning via E 500 control Swivel inside and outside 22.5° - 90° - 140° Tilt the angles between 45 and 90 degrees Digital Angle Displays Moving roller conveyor Minimum quantity spraying device Pneumatically folding support arms
Key data: 500 mm
Max. saw length: 5,000 mm Max. saw blade diameter: 500 mm Automatic positioning of length and angle (90° or 45°), intermediate mitres adjustable from the front Moving roller conveyor Material support pneumatically folds up Minimum quantity spraying device Instruction manual Weight: 1400 kg
Offer 26004 Technical data: - Saw blade diameter 420 mm - Saw blade bore 30 mm - Max. cutting length 6000 mm - Smallest cutting length at 90° + 45° 335 mm - Section area, see diagram attached - Swivel range inwards pneumatically 90 - 22.5 ° - Inward inclination range pneumatic 90 - 45 ° - Saw blade speed 2800 rpm - Drive 400 V / 2 x 4000 Watt - Compressed air connection 7 bar - Air consumption per work cycle - without spraying approx. 40 l - with spraying approx. 64 l - Space requirement approx. W 8500 x H 1800 x D 1800 mm - Weight approx. 1800 kg - with: - Control ELUMATEC E 355 - Sawing unit swivel and tiltable for high and wide profiles, - as well as screech cuts possible, can be swivelled inwards 22.5°, - Digital degree display - separate control cabinet, - C ...
Key data: 380 mm
Max. cutting length: 3000 mm Max. saw blade diameter: 380 mm Cutting area at 90°: 195 x 120 mm Cutting area at 45°: 135 x 120 mm Minimum quantity spraying device Pneumatic material tensioners Mitre cuts possible on both sides 2-hand operation
Inv. Num. : 8811 Type: DG 104 Producer: ELUMATEC Created: 1990 Parameters: Control unit: E 200
Max. cutting length: 5,000 mm Max. saw blade diameter: 400 mm Digital length display Minimum quantity spraying device Pneumatic material tensioners Mitre cuts possible on both sides 2-hand operation
Key data: 500 mm, 45 °
The machine is fully functional, pictures are attached. On request, we will also be happy to send you an up-to-date video showing the machine in operation. Aluminum Double Miter Saw Make: Pressta-Eisele Type: LMS D 450/500 Classic Single II TU/6 Year of Make: 1995 Saw blade size: 450 or 500 mm min./max. cutting length: 240 / 6000 mm Cutting speed: 2820 rpm. Air pressure: 6-8 bar Drive power: 2 x 2.2 kW Weight: 1450 kg External dimensions: approx. 7500 x 1490 x 1790 mm Cuts: 45°-90° (adjustable both blades) Nozzle for suction approx. 70 mm with -Single II control can be positioned electronically -pneum. Clamping devices -pneum. Mist spraying device Good condition, fully functional, ready to plug in for subsequent and immediate use. If you are interested in purchasing the machine, please make us an offer that is subject to change.
Max. cutting length: 3000 mm Max. saw blade diameter: 380 mm Manual length adjustment with digital display Cutting area at 90°: 195 x 120 mm Cutting area at 45°: 135 x 120 mm Minimum quantity spraying device Pneumatic material tensioners Mitre cuts possible on both sides 2-hand operation 800 kg
Offer 25115 Radial arm - Schiffterschnitt - Pendulum train saw Specifications: - Saw blade diameter 400 mm - Saw blade speed 3000 rpm - Cutting height up to approx. 125 mm - Cutting depth up to approx. 600 mm - Mitre adjustable in 2 axes - Table size approx. W 800 x D 800 mm - Table height 920 mm - Drive 400 V / 1.5 kW - Space requirement approx. W 800 x H 1900 x D 1100 mm - Weight approx. 200 kg
Key data: 550 mm
Max. saw length: 6,000 mm Smallest cutting length: 335 mm Max. saw blade diameter: 550 mm Automatic length positioning via E 255 control Swivel inside and outside 22.5° - 90° - 140° Tilt the angles between 45 and 90 degrees Digital Angle Displays Moving roller conveyor Minimum quantity spraying device
Lenght 6 m E355 positioner controller Saw diameter 420 mm
Key data: 500 mm
Double mitre saw Pertici Type: UNIVER 502D2 Year of Make: 1998 Cutting of aluminium and PVC profiles Cutting length 360 – 6000 mm Cutting width max. 150 mm Cutting height max. 350 mm Saw blade diameter D 500 mm Saw blade revolutions 2800 rpm. Saw blade bore d 30 mm Saw blades swivel from 90° to 45° to 0° Motor powers: 2.2 + 2.2 kW Connected load 4.5 kW, 380 volts 50Hz Automatic feed and cutting process Saw automatically moves to the entered dimension and cuts automatically Control panel with digital display for cutting dimension was used for cutting aluminum square tubes in the Windows and conservatory construction Good working condition, exact cut Dimensions 7200 mm x 1200 mm x H 1700 mm Weight: 1980 kg
AUDATECH (GEMMA GROUP) double head electronic cut-off machine model DH550: - for cutting PVC, aluminium, wood-aluminium profiles - all electronically managed: touch-screen programmer model TS9003, windows operating system, with USB socket for downloading cutting lists and with office ethernet connection - fixed left head, and mobile right head with automatic sliding on THK guides and with brushless motors - blade diameter 550mm, with micro-drop cutting lubrication - inclination of the heads from 22.30° to 157.30° managed by CNC - cutting length between the two blades from 380 to 4000mm - for cutting lengths greater than 4 m: possibility of automatic workpiece recovery by means of the moving head - 4 adjustable horizontal pneumatic clamps - 2 adjustable vertical pneumatic clamps - pneumatically operated central intermediate support - Profile support roller conveyor combined ...
Key data: 500 mm
Max. saw length: 5,000 mm Max. saw blade diameter: 500 mm Automatic positioning of the length as well as motorized angle adjustment inwards and outwards Moving roller conveyor Material support Minimum quantity spraying device Weight: 1800 kg
Max. saw length: 6,000 mm Max. saw blade diameter: 500 mm Automatic positioning via Diamond control of length and angles Swivelling of the angles inwards and outwards possible (20-135°) Moving roller conveyor Soundproof booth Minimum quantity spraying device Chip conveyor belt Weight: approx. 2,800 kg
Max. saw length: 5000 mm Max. saw blade diameter: 450 mm Automatic positioning of length and angle (90° or 45°) Moving roller conveyor Material support Minimum quantity spraying device
Key data: 550 mm
Five Axis CNC Controlled Dual Head Double Miter Circular Sawing Machine with Loading and Unloading Device Maximum section length with two saw heads at the same time - 6,000 mm Maximum saw blade diameter Ø 550 mm Infinitely programmable mitre angle adjustment - 15° / 90° / + 45° Saw blade drive power 2 x 2.64 kW Dimensions approx. 11.3 m x 2 m x H 2 m (with closed safety doors)
Lenght 5m Options: Load&unload VIRTUAL AXIS FOR CUTTING UNITS INCLINATION PROFILE CLAMPING LABEL PRINTER
Year: 2016 - technically efficient, ready to work - after full service - cutting length: 4000 mm - discs: 500 mm (feed from the rear) - pneumatic inclination of both heads: 90°, 45°, 22.5°, intermediate angles set manually - operator panel with Windows - cooling and lubrication installation for both heads - movable roller feeder - vertical and horizontal pneumatic clamps - automatic disc covers - delivery device for long elements - safety gates
- technically efficient, ready to work - after full service - cutting length: 6000 mm - discs: 550 mm - E555 control - digital angle indicator - pneumatic angle adjustment 45-90 degrees - cutting according to external dimensions, without correction - cooling installation - roller feeder - vertical pneumatic clamps - automatically lowered and raised disc guards - chip extraction for each head
Key data: 600 mm, 20 °
Semi-automatic circular sawing machine with radial cut for cutting aluminium, non-ferrous metals, wood and various plastics Clean, burr-free cut edges as if polished. Saw blade diameter Ø 600 mm Saw blade drive power 4 kW Saw blade travel forward for sawing - backward for empty stroke Mitre adjustment range infinitely variable from 20° to 125° Digital display for mitre angle Sawing range 90° - approx. 230 x H 180mm or 300 x H 120 mm Sawing range 45° - approx. 160 x H 180 mm or 210 x H 120 mm Saw blade feed speed infinitely variable by means of a handwheel. Automatic spray mist lubrication Compressed air requirement 6 to 8 bar Dimensions approx. 1.55 m x 0.96 m x H 1.65 m Weight approx. 670 kg
Key data: 600 mm, 45 °
Semi-automatic undercounter circular sawing machine for cutting aluminum, non-ferrous metals, wood and various plastics Clean, burr-free cut edges as if polished. Saw blade diameter Ø 600 mm Saw blade drive power 3 kW Saw blade path upwards for sawing - downwards for empty stroke Mitre adjustment range infinitely variable from 10° to 170° - with grid dots at + 45° and – 45° Pneumatic saw table clamping Digital display for mitre angle Sawing range 90° - approx. 400 x H 135mm or 460 x H 100 mm Sawing range 45° - approx. 190 x H 60 mm or 120 x H 150 mm Saw blade feed speed infinitely variable by means of a handwheel. Adjustment range material stop forward and backward approx. 180 mm Automatic spray mist lubrication Compressed air requirement 6 to 8 bar Dimensions approx. 1.1 m x 1.2 m x H 1.65 m Weight approx. 310 kg
offer 22556 Specifications: - Saw blade diameter 420 mm - Saw blade bore 30 mm - cutting length 3000 mm - smallest cutting length at 90° + 45° 335 mm - Intersection area see diagram attached - Swivel range inwards manually 90 - 22.5 ° - Tilt range inwards manually 90 - 45 ° - Saw blade speed 2800 rpm - Drive 380 V / 2 x 4000 Watt - Compressed air connection 7 bar - Air consumption per working stroke approx. 64 l - Space requirement approx. W 4500 x H 1950 x D 1600 mm - Weight approx. 1400 kg - with: - Cutting length adjustment with positioning control - Positioning control renewed approx. 2002 by WOLFF - Saw unit swivel and tilt for high and wide profiles, - as well as cut-outs
Very high-quality CNC – controlled two-unit double mitre precision circular sawing machine (heavy version - 2,500 kg dead weight) Brand new, immediately available from stock (subject to prior sale) For precise and rational cutting even of large and heavy profiles made of aluminium - non-ferrous metals - various plastics. The machine can be used both for single cutting - when cutting with two sawing units at the same time (smallest section length 370 mm / largest section length 6,000 mm) or in automatic mode – when used as single-unit circular saw machines, so that Section lengths from 5 mm to 15,000 mm and longer possible. Three CNC axes, electronic inclination of the saw units infinitely variable over the entire inclination range. SCHNEIDER® feed motors and electronic motor controllers. CNC control with Windows 10 operating system and 10.4" colo ...
Very high-quality CNC – controlled under-table two-unit double miter precision circular sawing machine with schifter cutting device (heavy version - 3,500 kg dead weight) Brand new, immediately available from stock (subject to prior sale). For the precise and rational cutting of large and heavy profiles made of aluminium - non-ferrous metals - various plastics. The machine can be used both for single cutting - when cutting with two sawing units at the same time (smallest section length 450 mm / largest section length 5,000 mm) or in automatic mode – when used as single-unit circular saw machines, so that Section lengths from 5 mm to 15,000 mm and longer possible. Five CNC axes for the electronic rotation of the saw tables infinitely variable over the entire rotation range, the vertical inclination of the saw blades electronically infinitely variable ...
Cutting length: min/max at 90 ° 330/5000 mm blade diameter: 450/500 mm kl.90°: 330 mm blade diameter cutting length: 450/500 mm Drive motor per unit: 2,2 kW Electr. Supply: 400 V, 5.2 kW Space requirements: 6760 x 1590 x 1700 mm weight: 1550 kg
Cutting length: 5000 mm blade diameter: depending on need 420-550 mm saw aggregate pneumatic swivel 45-90° Blade drive: 380 V, per 3 kW space: 6400 x 1400 x 1700 mm weight: approx. 1600 kg
