Manufacturer:
(Category: 202)
used
Vertongen Tenoning Machine P04 year 1979 S/N 5811 in great condition from a vocational school in Finland Included with tools Automatically adjustable tenoning machine Saw unit, max cutting height 130mm, spindle 30 mm /3000rpm, 400mm diameter saw blade 2 horizontal cutter blocks diam 160mm, spindle diameter 40 mm /4500rpm 2 vertical spindles 40 mm working height 160mm, 4000rpm ( Top + bottom ) 1 vertical spindle 40mm, working height 160mm / 4000rpm all spindles are adjustable in the horizontal and vertical direction Tenoning carrige 1000x280mm Sliding guide 2400mm with manual pressure and fence Power 380V 3-phase 50Hz Extraction needs (dust collector) 2400 m3/h Weight approx.1100 kg technical information under subject for corrections
KRÜSI chalet building machine / log house production line type CM 40 Manufacturer Krüsi Maschinenbau AG CH-9105 Schönengrund AR Year of manufacture 1996 CE- marked Condition: good, technically checked and cleaned / ready for operation Functional principle Machining of timber for chalet construction / log house production The beams can be processed in one pass - cutting to length - horizontal- and vertical milling of the necks / grooves in one clamping - drilling - milling the face grooves workpiece: - Cutting height max. 200mm - Cutting width max. 250mm Robust construction in welded design. Machine (horizontal and vertical milling unit) with 4 special milling motors, with hardened and ground guides for highest machining accuracy. Carriage guided by dust-protected and preloaded ball-bearing rollers. Working range up to 200 x 250 mm. Completely r ...
This 4-axis IMA BIMA 300 CNC Wood Machining Centre was manufactured in 2005. It features an impressive X-axis machining range of 4300 mm and a Y-axis machining range of 1400 mm. The spindle power is 7.5 kW with a maximum speed of 18,000 rpm. If you are looking to get high-quality wood machining capabilities, consider the IMA BIMA 300 machine we have for sale. Contact us for further details.
Swivel spindle milling machine VEMA TFMS 2-4 very good condition, as good as new, the machine comes from a penitentiary and has only stood for the last few years, it has been used very little and only operated by one person the company VEMA comes from northern Germany, the machine is similar in design to the KÖLLE F45 or the PANHANS 240 everything works perfectly all bearings and guides are OK Year of construction 1998 the machine has the control panel at the top with milling stop, which can be adjusted in depth on one side or completely, this is possible with a handwheel, there is a mechanical counter for the complete adjustment, the counter can be set to zero at any point at the touch of a button, so the stop can be adjusted quickly and very precisely both stop jaws can also be adjusted individually, there are also 2 mechanical counters, due to the one-sided adjustment, dres ...
Code: 0506 Brand: SAOMAD Model: UT 4 - CE Standard 4 Spindles tenoning machine for door and window frames, doors and windows - CE Standard Safety guards CE Standard Cutter heads lenght mm 100 Max distance between 2 heads mm 0/68 Horizontal displacement of upper head mm 30 Working table width mm 420 Table and square inclination +- 45 degrees Disk saw diameter mm 250 Diameter of counter profile disk max mm 300 Router shaft diameter mm 35 - Motor Hp 4 Cutter heads and disk saw motor Hp 3 Pneumatic workpiece clamping Heads suction mouth diameter mm 120 Router suction mouth diameter mm 120 Disk saw suction mouth diameter mm 120 Overall dimensions mm 1700 x 1150 x 1400 h Weight kg 500
Code: 0505 Brand: SCM Model: 150 - CE Standard Automatic spindle moulder with tilting spindle, with numerical control programmer (3 controlled axis) for joinery, furniture, bespoke furnishings, wooden joinery, doors, panels, plastics, composite materials and various other applications – CE Standard Technical data: Electronic programmer with 3 controlled axis (spindle lifting – spindle tiltimg – spindle guide) allowing up to 98 programmes to be stored and executed automatically Spindle diameter mm 35 Spindle tilting -10° to +45° Spindle speed rpm 3000/4500/6000/7000/10000 Motor power Hp 7,5 Table length mm 2600 Max spindle projection mm 215 Work surface height from ground mm 920 N° 2 dust extraction inlets diameter mm 120 Equipped with Maggi 4-roller automatic feeder Maggi with variable speed control Overall dimensions mm 2600 x 1300 x 1800 h Weight ...
Panhans swivel spindle milling machine with 4-roller feed With tenon table Panhans 1376 Type: 231 Series: 2000 Year of manufacture: 2000 CE Table size L 1100 mm x W 760 mm, table height 870 mm Motor power 7.5 kW, with motor brake Speeds 3000/4500/6000/9000 rpm. Height adjustment of the milling mandrel 120 mm Milling mandrel clamping length 120 mm with retaining ring Milling mandrel diameter 30 mm Swivel range -5° to +45° Height adjustment and swivel by handwheel Table opening min 70 mm, maximum 270 mm Milling fence with digital display Suction nozzle diameter 2 x 120 mm Belt quick release device Cutter quick clamping device Right-left rotation via rotary selector switch 400 V/N/PE / 50 Hz / 3 pH Current type AC Full load current 22 A with 4-roller feed Haffner with 8 speeds including new feed rollers including Panhans 1376 tenon table for mounting on machine t ...
x-travel: 885 mmy-travel: 600 mmz-travel: 450 mmb-axis: +20/-110 °c-axis: 360 °spindle speed:: 18.000 U/minspindle drive: 15 kWTool adapter: HSK-A63 table diameter: 600 mmTools changer: 30 fach/toolschip conveyor: kWInternal cooling system: 401 barControl: HEIDENHAIN iTNC 640 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mDMG HSC 70 – 5-Axis Machining Centre- 5-axis machining centre with linear motors- HEIDENHAIN iTNC 640 - Portal-type construction- Electrospindle with 18,000 rpm- 30-tool automatic tool changer- Probes included for tool and workpiece measurement- Internal coolant supply at 40 bar pressure- BLUM laser tool measurement system- DMG TS649 workpiece measuring probeThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This 5-axis BIESSE Rover C 6.65 was manufactured in 2009. It features a working area of 6,200 x 1,520 x 275 mm and a powerful main electrospindle with a maximum speed of 22,000 RPM. The machine includes a 22-position tool changer and an integrated vacuum system for efficient operation. If you are looking to get high-quality CNC machining capabilities, consider the BIESSE Rover C 6.65 CNC processing center we have for sale. Contact us for further details.
30 mm shaft, with light Brand: DANCKAERT Type: router / wood milling machine Manufactured: Belgian – Danckaert was a woodworking machine manufacturer based in Brussels. Indicated power: 5.5 HP, or approximately 4 kW Speed: 3,600 rpm (Marcel Lekeu plate reading) Visible number: 545-75 Equipment: vertical shaft, large work table, adjustable guide and mechanical adjustments by handwheel Auction-ID: A3-46142-35909
Spindle moulder with fixed spindle, table with extensionsTable length: 2,50 m.Support rail in the frontSpindle diameter: 50 mmMotor 5,5 kWSpindle speed, manual adjustment, 4000/6000/8000 r/min
height of spindle adaptable: by handspindle diameter: 35 mmmotor: 3/4 kW
Milling spindle diameter: 50mmUseful span: 240mmMilling spindle speeds: 4400/6400/7000/9400 tr/minMotor: 7.5 kWTable dimensions: 1100 x 800mmMax milling diameter: 220mmExtension table: 200x1000mm + 200x2000mmAttachments: 2pcs 145x500mmDust extraction diameter: 150mm
Table: 825 x 1140 mm Extendable workpiece supportSpindle diameter: 50 mm Spindle length: 210 mmVertical spindle travel: 190 mm Maximum profiling tool diameter: 200 mmMaximum tenoning tool diameter: 320 mmMotor 5.5 kWIncl. side-mounted tenoning carriage5 speeds: 3500 - 6500 - 8000 - 10000 rpm
Tilting spindle model, -45° – 45°5.5 kW motor, 1500/3000/4500/6000/9000 rpmUsefull spindle length: 180 mmMotorised height and angle adjustment with digital displaySpindle diameter 50 mmAigner guideTornado feeder with 4 wheels
Max tenon width: 100 mm + thicknessMax tenon thickness: 30 mmMax tenon depth: 50 mmTable adjustments: vertical: 100 mmtilt on both sides: 15°/0°/-15°front tilting: +5°/-20°guide on table for mitre positioningcutter spindle motor: 3,7 kWmotor for drum rotation: 0,4 kWdust extraction: 2 x 100 mm
Working piece thickness (Radius) ca. 16 - 55 mmWorking piece thickness (Chamfer) ca. 12 -55 mmWorking piece width min. Ca. 30 mmInner radius min. Ca. 35 mm (depending on edge-radius and workingpiece countours)Edge thickness max. ca. 3 mmMilling motor 2 x 0,4 kW, 10950 o/min.Dust extraction 1 x diam. 80 mmWorking height 900 mmRadius 3 mm tooling
Swivel spindle milling machine KÖLLE F 45 very good condition, the machine comes from an assembly company and has only stood for the last few years, it was no longer needed everything works perfectly all bearings and guides are OK, the machine has a very smooth running Year of Make: 1990 with control panel at the top on the milling fence, both stop jaws can be adjusted in depth, with fine adjustment and scale, so dressing work can also be carried out, e.g. on a gluing profile, the entire milling fence can also be completely adjusted in depth with an adjustment wheel and a threaded spindle, which allows very precise and fast adjustments with AIGNER integral stop with spindle lock by lever the chips can be discharged very well, with 2 suction nozzles, 125mm at the milling stop and at the machine table it is 100mm with 30mm spindle, which can be swivelled continuously from -5 t ...
This 3-axis SCM RECORD 132 CNC Wood Machining Centre was manufactured in 2005. It features a large working table of 4100 × 1300 mm and an automatic tool changer with a capacity of 12 positions. The machine includes a full vacuum table for efficient workpiece clamping and comes with Xilog CNC software. If you are looking to get high-quality wood machining capabilities, consider the SCM RECORD 132 machine we have for sale. Contact us for further details.
This 3-axis COMEVA MEX V 2100x3260 was manufactured in 2018. It features a working area of 2150 x 3250 mm and is driven by Yaskawa servos. The machine is equipped with a 9 kW ISO30 routing spindle, a 7-position automatic tool changer, and an HSD C-axis for aggregate machining. If you are looking to get high-quality CNC wood machining capabilities, consider the COMEVA MEX V 2100x3260 machine we have for sale. Contact us for further details.
Carousel milling machine Comec FGS-1T CAB Number of generators 1 Milling motor power: 5.5kw Cutter Speed: 7050rpm Tool min/max 120-200mm Spindle Diameter 40mm Maximum cutter height 115 mm Diameter of the processed material min/max 110-800mm Table Rotation Motor Power: 1.5KW Table speed 1.65-8.8 rpm Machine Dimensions 1600×1700×2600mm Machine Weight 1500kg Net price
Carousel milling machine Comec FGS-1T CAB Number of generators 1 Milling motor power: 5.5kw Cutter Speed: 7050rpm Tool min/max 120-200mm Spindle Diameter 40mm Maximum cutter height 115 mm Diameter of the processed material min/max 110-800mm Table Rotation Motor Power: 1.5KW Table speed 1.65-8.8 rpm Machine Dimensions 1600×1700×2600mm Machine Weight 1500kg Net price
Professional chain mortiser by NGA, model SM500, Italian manufacture. Sturdy and reliable machine for high-precision woodworking, ideal for making doors, window frames, cases, mortising and special wood joints. Suitable for daily professional use. Features: heavy and durable construction, powerful 3-phase motor, automatic chain lubrication, clean and precise cutting, fast production work. Repaired by our technical department and fully functional. Cutting tools/chain provided extra. Auction-ID: A7-50988-2
- Vertical drilling unit with 16 drilling spindles in the X direction - Vertical drilling unit, with 15 drilling spindles in the Y-direction - Vertical drilling unit, with 13 drilling spindles in the Y-direction (grid 25 mm) - Horizontal drilling unit with 6 drilling spindles - Horizontal drilling unit with 2 drilling spindles. - Main spindle 7.5/10 kW - (S1/ S6 operation HSK F63, incl. liquid circulation cooling with integrated CNC axis rotating 360 degrees incl. torque support. - Automatic tool change magazine for 8 seats (plate changer) - HOMATIC - 2000 IPC with WoodWOP 4.0 programming software - Pillar extension Y-direction 120 mm and K-table 1500 mm - Incl. 2 adapter units, see photos
Spindle moulder with tilting shaft Scm mod. Used T150K Strip recovery unit KW 2.2 spindle moulder guide that can be excluded from the work surface Driving position adjustment with handwheels and mechanical height displays spindle moulder motor HP 7.5 Automatic star/delta start with rotation reversal Shaft rotation 3000/4500/6000/7000/10000 rpm Removable front guide spindle moulder shaft inclination -10/+45° length of shelves mm. 2550 d. max profiling tool d. 250 mm. Fast sector table to replace the rings on the table Weight kg.745 Dimensions mm. 2550x1200xH1300 CE
200 € 
