Manufacturer:
(Category: 202)
Code: 0485 Brand: MASTERWOOD Model: CV1- CE Standard Chain mortising machine for cutting mortises in wooden joinery, doors, furniture, shelves and other items – CE Standard Technical data: Sturdy cast iron frame Max mortise depth 180 mm – Effective depth 150 mm Max mortise length 280 mm Transverse stroke of cutting head 80 mm Vertical stroke of worktable 200 mm Motor 1,8 Hp Max workpiece height 900 mm Suction inlet diameter 120 mm Overall dimensions mm 1000 x 600 x 1750 h Weight kg 170
Sauter Type RS semi-automatic finger-jointing machine for joining timber workpieces using finger joints. The machine is suitable for processing offcuts and for producing extended solid timber slats. Consisting of: Sauter Type RS-FPEL 130 milling and gluing machine Sauter Type RS-DKPV 6 press Sauter DAS 500 cross-cut saw Technical data: Milling height: 130 mm Max. finished length: 3,000 mm Workpiece width: 4595 mm Milling motor: 15 kW Condition: Gebraucht Location: Tauberbischofsheim, Germany
This 4-axis MORBIDELLI A644S FTP 41 PC was manufactured in 2015. It features an impressive X-axis travel of approximately 4,400–4,500 mm and Y-axis travel of approximately 1,350 mm. The machine is equipped with a CNC milling spindle and an automatic tool changer, ensuring efficient processing. If you are looking to get high-quality CNC processing capabilities, consider the MORBIDELLI A644S FTP 41 PC machine we have for sale. Contact us for further details.
This 4-axis SCM Morbidelli Author M100 CNC Wood Machining Centre was manufactured in 2018. It features a working area along the X-axis of 3110 mm and a maximum panel height of 180 mm. The machine is equipped with 21 vertical spindles and 10 horizontal spindles, providing versatile machining capabilities. If you are looking to get high-quality wood machining capabilities, consider the SCM Morbidelli Author M100 machine we have for sale. Contact us for further details.
CNC router manufactured in 2009. This MECANUMERIC Pro 3015 has been very lightly used, with a total operating time of just 1,369 hours. The machine is in very good mechanical condition, although the spindle bearings will need replacement. It is currently connected to power and can be tested until approximately the end of September 2026. If you are looking to get high-quality routing capabilities, consider the MECANUMERIC Pro 3015 machine we have for sale. Contact us for further details.
Paoloni T140 table spindlemoulder Manufacturer: Paoloni Type: T140 Motor: 5 KW Spindle diameter: 30 mm Spindle elevation: 140 mm Rotation speed: 3000-4500-6000-9000 Spindel elevation: Handwheel with analog clock Feeder: HolzHerr 3 rollen Fence: Aigner integraal aanslag Condition: fully functional
Masterwood chisel mortiser Type: OMB1 (horizontal mortiser) Chissel: 2.2 kW electric movement with hydraulic drive stroke Table: electric sideward driven, with stops Fixation: 2 top/vertical hydraulic product clamp 2 horizontal hydraulic clamps
Verboom PN5 Left Manufacturer: Verboom Type: PN5 Left Year: Norm: EU-conformity Specifications: Saw: 2.2 KW top positioned aggregate; axial and radial positioning with analog reading Horizontal spindels: 2 2.2.kW, horizontal positioned spindels over each=other with Siko analog-digital counters for exact positioning 1st vertical spindel: Vertical spindle, 20040 mm, motor: 5,5 KW ; axial and radial positioning with analog reading 2nd vertical spindel: Vertical spindle, 120 mm, motor: 4,0 KW ; axial and radial positioning with analog reading Table: Large solid steel table with manual product clamps Length measurement: Analog cross cut fence extendable Swiveling, for angular jobs Dimensions: 3.5 (0.9+0.9) 1,6 m
Martin T25 Schwenkspindelfräse mit 2 Achs-elektrische Verstellung Marke: Martin Typ: T25 M-Nr.: V175170 Baujahr: 1990 Motor: 5/6 kW Schwenkung Frässpindel: -5° – +45° Fräsdorn: 30 mm Spindelhöhenverstellung: 150 mm (elektrische Einstellung) Drehzahlen: 3000/4500/6000/9000 U/min (2 Drehzahlmotor) Konus der Frässpindel: MK5 Softstarter: Automatischer Frässpindel-Anlauf/-bremsung per Drehknopf Systemsteuerung: Unteres Spindelverstellung: Elektromotorhöhenverstellung mit Analog-Auslesung Schrägstellung -5° – +45°: -5° – +45° Elektromotorschräge mit digitaler Lesart Fräsanschlag: Aigner Intergraal Anschlag Zustand: Voll funktionsfähig getestet
max. workpiece length: 6360 mmprofile spindle: 1 Stückmain drive: 13 kWControl: Maestro SCM CNC Machining Center ACCORD 40 FX for windows and doors---------------------------------------------------Available as an OPTION at an additonal cost of 20.000 Euro: extensive window and door toolingamong others (window cutting available upon request!):Wooden windows IV 68, 78, 92Wooden style windowsWood-aluminum windowsFront doorsLift-and-slide doorsBox windowsMachine still in operation, available for viewing!Technical Summary (detailed description available upon request!):---------------------------------------------------- Working area X-Y = 6360 x 1905 Z = 350- Automatic table with 8 support rails MATIC - L1825- 5-axis spindle MAXI - Prisma T, HSK 63 E, 13 kW- RTCP Setting - Self-calibration system for Prisma work unit- Adjustable chip removal device on the electric spindle- Preparation for ...
Working width from to: 50 x 150 mmWorking height from to: 20 - 50 mm0: 1000 - 6000 mmGötzinger finger jointing machine KZA---------------------------------For sale on behalf of a customer!The machine was used for board production.Year of manufacture: 2020Input length: 500 – 5,000 mmFinished length: 1,000 – 6,000 mm (also longer lenghts are possible)Wood thickness: 20 – 50 mmWidth: 50 x 150 mmPressure: 50 cm² (approx. 5 tonnes)Output (cycle time): 2 – 3 joints per minuteThe system consists of:- Cross conveyor inlet- Finger jointing machine (2 milling motors, 4 kW each), horizontal fingers(edge fingers)- Transport roller conveyor- Glue applicator for PU glue with two application valves(needs to be overhauled)- Hydraulic finger joint press with 5 tonne pressing force- Crosscut saw with measuring wheel - Outfeed roller conveyor with pusher --------- ...
Cross-section milling machine Festo Universal profiling cutter Type: UP 65 Milling finger tines and finger joints Cross-profiling in endless cycle succession Milling depth maximum 65 mm Maximum working height 100 mm Tool clamping width 200 mm Support table length x width 657 mm x 272 mm Motor power 7.5 kW Speed of the milling spindle 4,300 rpm Tool flight circle maximum 250 mm Milling spindle diameter 40 mm Cutting speed 56 m/sec. Working cycles maximum 8 per minute Air consumption per work stroke 14 NI (standard liters) Cutting cross-section per stroke maximum 60 cm² Air requirement 20 m³/min. Extraction connection 1 x 250 mm x 140 mm, 1 x 120 mm diameter Speed of table movement up and down can be regulated Weight: 300 kg L x W x H : 850 mm x 700 mm x 1,170 mm
This 3-axis Weeke OPTIMAT BP 120 was manufactured in 2001. It features a working area of 2800 mm in the X direction, 1252 mm in the Y direction, and 200 mm in the Z direction. The machine includes an automatic tool changer with an 8-position tool magazine and a maximum spindle speed of 24,000 rpm. If you are looking to get high-quality CNC wood machining capabilities, consider the Weeke OPTIMAT BP 120 machine we have for sale. Contact us for further details.
This 3-axis SCM Morbidelli N100 22-31 PROSPACE was manufactured in 2022. It features a powerful 9.5 kW electrospindle, a full nesting table, and a 13-position linear automatic tool changer. The machine is equipped with two vacuum pumps and an automatic tool length measurement system, making it suitable for various applications such as nesting, drilling, and milling. If you are looking to get high-quality CNC processing capabilities, consider the SCM Morbidelli N100 22-31 PROSPACE machine we have for sale. Contact us for further details.
Panhans 240A Low Spindle Milling Machine Spindle diameter 30mm Spindle length 130mm Spindle speed variable 3000/4500/6000/9000r.pm Electronic spindle height adjustment Electronic angle adjustment Main motor power 11kw Additional longitudinal carriage mounted to the workbench 3-roller feed Net price
Wooden sling jaws (with long right sling jaw) Tool Ø max. 180 mm Speed 1,700/3,500/6,000/8,000 rpm (manual belt reposition) Connection 400 V, 3~, 50 Hz, 5A, 2.2 kW Weight approx. 156 kg
Chain milling machine on its own stand with various accessory components (b. Chains and Swords)
Spindle moulder manufactured in 2008. This Colombo AM 60 features a robust design suitable for various woodworking applications. If you are looking to get high-quality woodworking capabilities, consider the Colombo AM 60 spindle moulder we have for sale. Contact us for further details.
Model MX5115 Table size 640 × 580 mm Table tilt 0-45° Vertical table stroke 100-120 mm Maximum working thickness 50-120 mm Engine power 2.2 kW / 3.0 kW Power supply 220 V / 380 V, 50Hz Spindle speed 15,000/18,000 rpm Tool shank diameter 6.35 mm - 12.7 mm Transport dimensions 780 × 710 × 900 mm Weight 150/180 kg Price 760 Eur (EXW Jonava, Lithuania)
This 5-axis BIESSE Rover A FT 2243 including WINSTORE 3D K1 was manufactured in 2014. It operates on a 400 V power supply. With approximately 1,700 hours of axis movement, this CNC wood machining centre is designed for precision and efficiency. If you are looking to get high-quality wood machining capabilities, consider the BIESSE Rover A FT 2243 machine we have for sale. Contact us for further details.
Table milling machine wood power with 3-roller feed Type: Minimax t45c LL Year of Make: 2022 CE Table milling machine with rigid milling spindle, gray cast iron work table, Table extension and pull-out workpiece support and 3-roller feed VSA 38 B1 - Work table L 1945 mm x W 695 mm, table height 900 mm - Spindle speeds 3500/7000/10000 rpm. - Spindle protrusion over table max. 130 mm - Milling spindle right-left rotation - Useful length of the spindle 100 mm - Spindle diameter 30 mm - Tool diameter can be lowered max. 180 mm - Tool profile milling diameter max. 210 mm - Motor 5 kW 400 V 50 Hz - Suction nozzle 2 pieces each 120 mm diameter - Incl. aluminium stop jaws, table extensions left and right, sheet milling protection cover and extendable workpiece support (up to 1950 x 550 mm) on the machine front Very good condition Machine dimensions L 1945 mm x W 575 mm ...
This 3-axis FORMAT4 c-express 920 classic was manufactured in 2018. It features a maximum workpiece dimension of 3000 mm in the X direction and 920 mm in the Y direction, with a robust clamping collet system for CNC through-feed technology. The machine is equipped with 6 vertical and 9 horizontal drilling spindles, allowing for versatile drilling, sawing, and milling operations. If you are looking to get high-quality wood machining capabilities, consider the FORMAT4 c-express 920 classic machine we have for sale. Contact us for further details.
This 3-axis VITAP POINT 2 CNC processing center was manufactured in 2016. It features a unique patented belt transport system for uninterrupted panel movement and a maximum panel size with no limits. The machine includes 9 vertical independent spindles and offers high productivity with zero setup time. If you are looking to get high-quality drilling and grooving capabilities, consider the VITAP POINT 2 machine we have for sale. Contact us for further details.
This 4-axis HOMAG OPTIMAT BHX 200 was manufactured in 2016. It features a rigid steel frame construction and dust-protected linear guideways, ensuring durability and precision. The machine is equipped with digital servo drives and offers rapid traverse speeds of up to 50 m/min on the X/Y axes. If you are looking to get high-quality CNC processing capabilities, consider the HOMAG OPTIMAT BHX 200 machine we have for sale. Contact us for further details.
Table dimensions: 2.000 x 815 mmMotor output: 7,5 kWSpindle diameter: 30 /40 mmreus: 1.500-10.000 U/minWeight: ca. 820 kgswival range +/-: -45,5° bis +45,5° °table height: 890 mmheight adjustment: ca. 145 mmtool taper: MK5 : Ja : Ja Dust suction hood: 120 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
