used Numerically controlled machining centres for sale

x-travel: 1200 mmy-travel: 600 mmz-travel: 800 mmControl: Heidenhain type: TNC 426 table surface area: 1250x630 mmworkpiece weight: 1000 kgTool changer: 24 spindle taper ISO: 40 turning speeds: 30-8000 U/mintotal power requirement: kWweight of the machine ca.: 7,5 tdimensions of the machine ca.: 4,2x3,3x3,15 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1200 mmy-travel: 600 mmz-travel: 800 mmControl: Heidenhain type: TNC 426 table surface area: 1250x630 mmworkpiece weight: 1000 kgTool changer: 24 spindle taper ISO: 40 turning speeds: 30-8000 U/mintotal power requirement: kWweight of the machine ca.: 7,5 tdimensions of the machine ca.: 4,2x3,3x3,15 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 650 mmy-travel: 540 mmz-travel: 620 mmControl: Heidenhain type: iTNC 530 table surface area: 800x540 mmTool changer: 20 Posspindle taper ISO: 40 turning speeds: 50-10.000 U/minCooling through the spindle: 20 barworkpiece weight: 600 kgtotal power requirement: 14 kWweight of the machine ca.: 4,2 tdimensions of the machine ca.: 2,4x2,1x2,9 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is located in Spain. It is currently still electrified and has 1800 operating hours. It is in very good condition.

Axes Strokes X = 3706mm Y = 2294mm Z1 = 515mm Z2 = 371mm Max rotation 24000 rpm C axis = 360 deg non-stop rotation B axis = 360 deg non-stop rotation 16 position revolver toolchanger

I sell a 4-axis CNC machining center Biesse Rover 24L with truss table Year of construction 2004. Configuration: 4-axis main spindle HSD freshly fully repaired / Water-cooled RS1600 Tool magazine 7 positions ISO30 on the head 1x groove saw X-direction Drill head 14+4+2 drilling spindle Usable work surface 4500x1330mm. 2 work surfaces, 4 clamping zones Automatic system of Central Lubrikazion Combined power 35kW XDNC 2.01 software with operating instructions. Pump Becker 250/300 m3/h. 5,5KW Additional vacuum for stencil work or additional clamping devices. Good condition. Available from stock. Need for repair: handles on the truss table, Rotazion from ISO30 magazine on the head

Processing Manufacturer: Biesse Model: Rover 335 ATC Working range: approx. 3200mm x 950 mm Drilling spindles vertical: 24 pcs. Drilling spindles horizontal: 10 pcs. Milling unit: 7.5 KW

BIESSE ROVER A 3.40 machining centre Working Range X: 3060mm Working range Y: 1260 mm Working range Z: 150 mm Number of electrospindles: 1 Main motor 12 kW Tool magazine slots: 18 Vertical drilling spindles: 14 Machine Table: Traverse Table Software: BIESSE BIESSEWORKS ADVANCED + additionally on board Machine control: BIESSE XP 600 - Manual control panel: Yes Fabric stands: yes ( new suction cup rubbers ) - BIESSE ATS: Yes Fixed mounting points for chiller: yes Material clamping system: HSK-F63 Horizontal drilling spindles in the X-axis: 4 Horizontal drilling spindles in the Y axis: 2 Sawing unit: in X direction - Boom Design: Yes Number of traverses: 6 Vacuum pump: Yes Vacuum pump capacity m³/h: 90 - CAD (.dxf) reading interface: yes

Key data: 3048 mm, 1250 mm

3048 mm X Axis Travel, 1250 mm Y Axis Travel (6) Pneumatic Hold Downs, 4 Unit Automatic Tool Changer, (5) Verticale Spindles on X Axis, (5) Verticale Spindles on Y Axis, (4) Horizontal Spindles on X Axis, (2) Horizontal on Y Axis, 100 mm X Axis Grooving Saw, 400V 3PH S/N 4514

Key data: 500 mm, 450 mm, 400 mm

General Manufacturer: Deckel Maho Type: DMU50 Year of Make: 2005 Control: Siemens 840D ShopMill Travel: X 500 mm Y 450 mm Z 400 mm C 360° W +110°/-5° Spindle Speed: 10,000 rpm Tool holder: SK40 Tool Changer Number of stations: 30x Table Table size: 630 x 500 mm Dimensions and weight Dimensions: 3,149 mm x 2,120 mm x 2,424 mm Weight: approx. 4,050 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Preparation of workpiece probes Tabletop clamping hydraulic

Short description of basic equipment: - Console clamping table "K" - HOMATIC control PC 83 with Windows operation - Main spindle 12 kW - Plate changer 18-fold - Unit interface for changing machining units into the main spindle, with integrated pneumatic supply and C-axis drive - WoodWOP 5.0 programming system - Laser positioning aid for vacuum clamps Workpiece dimensions: - Workpiece length max. 4500 mm - Workpiece width max. 1300 mm for milling with tool diameter 20 mm max. 1150 mm for all units - Workpiece thickness Max. 60 mm with standard clamp max. 200 mm with clamping templates (customer's side) Other features: - 4 x lifting rail with sliding coating, visible on the console - 2 x side and longitudinal stop pins - Chip conveyor belt - Drill head 12 spindles, vertical - Ethernet network connection All information is subject to actual equipment

I sell radius copy milling unit for edges suitable for CNC machining center machines with edge banding HOMAG, WEEKE, BIESSE, SCM, MORBIDELLI, HOLZ-HER, IMA, FELDER, MASTERWOOD, BUSELLATO, etc. n 12,000 rpm. Radius R2mm. HSK63 posture. Available the same.

Cnc machining center IMA BIMA 310 V 120/160 B.j 2004 Equipment: - Dyna Poin Armoury Table BIMA 410 V Cgvpa9u89o - 4 Seat occupancy - Edge gluing part Specifications: Machining area - in X-direction without gluing: 6000 mm - in X-direction mot gluing: 5000 mm Jyox3u - in Y-direction: 1300 mm - in Y-direction with main spindle + WZ-Ø 20 mm: 1630 mm - in Y-direction with gluing: 1450 mm

CNC processing centre Brand: IMA Type: BIMA 310V 120/600 Year: 2004 Technical data: Machining area - in X-direction without gluing 6000 mm - in X-direction motor gluing 5000 mm - in Y-direction 1200 mm - in Y-direction with main spindle + WZ-Ø 20 mm 1300 mm max. clamping height from Upper edge of suction plate Z1 100 mm max. workpiece thickness Z 2 depending on equipment/application Worktable height: approx. 950 mm 1 main spindle with feed stroke pneum. - Drive power: 12 kW in S-1 operation - Tool holder: HSK F63, taper diameter =38 mm - Tool feed: automatic - Pull-in force: 11000 N - Tool weight: max. 6 kg - Direction of rotation: right/left rotation, programmable - Speed range: stepless 1500 - 24000 rpm, programmable - Drive: frequency-controlled three-phase motor Spindle lubrication: unique factory grease lubrication - spindle cooling: water cooling  ...

3-axis machine for milling and drilling Working dimensions: X - axis: 4,000 mm Y - axis: 1,200 mm 6 workpiece supports 4 lifting rails for positioning heavy workpieces Rear row of stops medium row of stops (especially facilitates the assignment of the machine with small workpieces) Left-hand and right-hand stops on the side 20 pcs vacuum cups Vacuum pump 90 cbm/h incl. coolant unit for main spindle Stepping mat protection in front of the machine Machining equipment: Milling unit 7.5 kW, 1,500 - 18,000 rpm Tool holder HSK 63 F Spindle water-cooled with separate cooling system Tool change magazine 8 times moving along with the milling spindle Drill head with 21 vertical drilling spindles, pitch 32 mm Spindles can be called up individually ATTENTION: 1 spindle defective Horizontal drill head with grooving unit in crosshead design 0 / 90 degree sw ...

CNC for doors or stairs Boom machine with console table 4-axis x- axis 5000 mm Y-axis 1350 mm z- axis 450 mm a- axis 190 degrees Double occupancy at the table Machine has run little

max. workpiece length: 4400 mmprofile spindle: 1 Stückmain drive: 19,2 kWControl: Beckhoff CNC machining center MASTERWOOD 4 WIN---------------------------------------------------------STOCK MACHINE: Immediately available!Specially designed for a rational and flexible wooden window u.door productionHIGHLIGHTS:- Different tool magazines for optimal tool loading- Simultaneous loading of 4 workpieces- Patented clamping system for optimal processing of the workpieces- CNC controlled work table with automatic positioning of beams andStretcher- Automatic re-clamping for changing between external and internal profiling- INTEGRATED window construction software, i.e. the machine does not have to (but canof course) can be controlled from the office with external industry software.- strong motor with 19.2 kW HSK-63 EPlease note that this stock machine is with us in Oberkochen andis already equippe ...

x-travel: 800 mmy-travel: 500 mmz-travel: 610 mmControl: Fanuc type: 18 M table surface area: 1000x500 mmTool changer: 24 spindle taper ISO: 40 turning speeds: 8000 U/mintotal power requirement: kWweight of the machine ca.: 5,8 tdimensions of the machine ca.: 4,2x3,3x3,15 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1000 mmy-travel: 1040 mmz-travel: 750 mmcontrol: Heidenhain TNC 426 turning speeds: 15000 U/mintotal power requirement: 40 kWweight of the machine ca.: 10,1 trequired space: / mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC machining center Manufacturer: MKM Model: UNI_Compact Year of construction: 1999

Key data: 900 mm, 2600 mm, 80 mm

Model Author 503, 3 axis machine, x = 900 y = 2600 Z = 80, with groove saw, 1 x milling, T dowel drilling 18 + 3 on the front side, 2 + 2 from the back and front 1 x, year of manufacture 95

It functions, works properly, is occasionally used in specialist milling and drilling of furniture. Very simple, trouble-free and graceful equipment. 16 drilling spindles, 2 electrospindles, saw unit, Becker vacuum pump. Trio 6000 control.

x-travel: 1250 mmy-travel: 800 mmz-travel: 240 mmcontrol: Siemens turning speeds: 45 - 3600 U/mintotal power requirement: / kWweight of the machine ca.: 9 trequired space: / mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Troughfeed boring machine Make: VITAP Type: ACOUSTIC For creation of acoustic panels for noise reduction Boring machine with through feed panel, boring from the bottom and automatic panel return to the operator. Three controlled axes: - X Axis - Panel movement by means of a strong pneumatic clamp - Y Axis - Boring head movement - Z Axis - Panel boring - Newly patented, high rigidity boring head movement on Y and Z axis. - Constant Side pusher: Side pusher with constant preload for perfect positioning of the panel on the machine zero point. - New frontal and more user friendly tool change system No limit in panel length High productivity and flexibility - The drilling head processes several holes at the same time - Different grids are possible also drilling grids with shift - Different drilling heads are optional available Easy TPA programming - Control: F ...

Grooving machine for throughfeed process Brand: Vitap Type: Grooving New machine For the processing of acoustic panels Processing unit: - Shaft with 7 presettable saw blades, distance 30mm. - Blade thickness 4mm - Rotation of the shaft , 7000 rpm. - presetting with rapid hook HSK - Max diameter of the blade 125mm Workpieces: - Max. thickness of the panel 50mm - Max weight of the panel: Kg 50 - Max panel size : X no limit, Y 1200 mm, Z 50 mm - Min panel size: X 400 mm, Y 300 mm, Z 12 mm - Panel feeding speed : 25m/min Characteristics: 3 controlled axes: - X Axis - Panel movement with two dinamic clamps - Y Axis - Grooving head movement with pinion and precision rack - Z Axis - Movement with screw at spherical recirculation - Newly patented, high rigidity operating unit movement on Y and Z axis. - Constant side pushing to keep the 0-line - Positioning ...

CNC punching machine Brand: Vitap Type: MICRA New machine High-Performance CNC machine for the production of acoustic panels with Micro-Perforation - Every 4 seconds the punching of 1.000 up to 2.331 holes are possible (depending on the workpiece) 3 controlled axes: - X-axis: drive via 2 motors and planetary reduction gear, guidance via pinion and rack - Y-axis: drive via 1 motor and planetary reduction gear, guidance via pinion and rack - Z-axis: drive via central hydraulical unit Easy handling with TPA control - Virtual display of programmed punching holes in the CAD environment - Optimization software for the working process - LCD TFT Monitor 20 - USB port - Basic Version CAD TPA - Macro programming Processing head - 5mm grid in X- and Y-direction - Punch depth: 3mm - Changable punching tools The processing head can optionally be customized ...

CNC machining center WEEKE Type: BHC 280 Woodwop 5.0: Year: 2005 4 Axes

CNC processing centre Brand: Weeke Type: Optimat BHC 655 Year: 2004 - axis movement (X-/Y-/Z-direction) via a compact linear guide system, dust-protected - ball screw spindle (Y- and Z-direction) and rack and pinion drive (X direction) Software: WOODWOP, machine data acquisition, provision of teleservice BASIS-table basic equipment 6 traverses 1 low-maintenance vacuum pump with 100 m³/h output 6 traverses, continuously adjustable in the X direction 4 program-controlled workpiece stops, mounted as a rear row of stops 6 program-controlled workpiece stops, mounted as a front row of stops 2 side stops mounted on an aluminium profile in Y-direction, which can be switched off manually when oversized workpieces are being processed. The side stops can be adjusted manually in Y-direction. 6 workpiece lifting arms for heavy workpieces Milling spindle HSK 9 kW (S6 50%), l ...

Type 1325 Useful working area axis X-Y-Z 1300-2500-200 mm Spindle, air-cooled, 6kw, 18000 rpm. Engine Hybrid servo Drive system LAAK Work table vacuum plate Vacuum pump 7.5kw Maximum speed 25,000 mm/min (x y) 10,000 mm/min ( Z ) Working speed 10-15M/MIN Power 380V/50HZ Code G Transport dimensions 3200x2100x1800mm Weight 1600 kg Price 9600 Eur (EXW Jonava, Lithuania)