Manufacturer:
(Category: 202)
Profile edge grinding and milling machine, edge grinding machine, edge grinder, grinding machine -with: copying device -Equipment: 1 grinding head -Power: 1.1 kW -Speed: 500-1500 rpm -Dimensions: 1200/1420/H1520 mm -Weight: 656kg Compact linear milling and grinding machine for any profile on strips and panel edges. Extremely short changeover times to a stationary grinding machine. Corner processing on MDF and solid wood workpieces with different radii (R = 1 to R = 30 mm) and corner angles. Manual creation of corner angles from 25 to 170 degrees. The grinding process for corner processing takes place in one clamping (approx. 10 seconds).
Control: Heidenhain TNC 407 serial number: 60/1997 x-travel: 1.000 mmy-travel: 600 mmz-travel: 700 mm: TISCHMAß: 1300 X 600 mm : Werkzeugwechsler: 24- fac The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Table milling machine, table milling machine-Spindle: comes from a Lubimez bench milling machine-Table milling machine: with rigid spindle-Dimensions: 800/800/H400 mm-Weight: 95 kg
spindle moulder, spindle moulder, wood milling machine-Manufacturer: SCM, table milling machine type T 110 A with table extension-Drive: 4 kW-Milling spindle: Ø 30 mm-Speeds: 3,000/4,500/6,000/8,000/10,000 rpm-Table extension: with stops on both sides see photos-Dimensions total: 3600/910/H1610 mm / machine 2615/750/H1320 mm-Total weight: 550 kg
There are two Spindle Moulder Casadei available. (1) Casadei FM5L, max. milling height: 100mm, motor power: 6kW, length: 2540mm, width: 1195mm, height: 1500mm, weight: approx. 950kg, year of construction: 1992, with table extension. (2) Casadei FM5C, motor power: 6.8kW, year of construction: 1994, with trolley. On-site inspection is possible.
Copy milling machine, copy milling machine, hand lever milling machine, hand lever milling machine, single spindle copy milling machine-Manufacturer: elumatec, 1-SPINDLE COPY MILLING MACHINE Type AS 70/44-Spindle speed: 12000 rpm-Stop depths: see photos-Workpiece clamping: pneumatic-Dimensions: Milling machine 580/500/H1510 mm roller blocks 1050/210/H900 mm-Weight: 149 kg with pallet
Table milling machine Schröder Table length 2480 mm Extendable table support Milling spindle in the machine diameter 30 mm incl. milling spindle diameter 40 mm with 4 rollers feed wood with mechanical spindle brake by foot lever Weight approx. 800 kg
Code: 0125 Brand: OMEC - ITALY Model: F8 - CE Standard Automatic dovetailing machine for dovetail joints on drawers and various furniture elements - CE Standard The machine is equipped with a unit of 8 spindles with equal mill cutters that allow the production of indents of different heights. Technical data: No. 8 spindles Spindle revolutions /min 17,000 Maximum working width mm 400 Distance between centres of indents mm 25 Drawers production 120 / hour Power Kw 7,5 Working pressure 6 atm Overall dimensions: mm 1500 x 1000 x 1200 h Weight kg 1100
gebr. Table milling machine MARTIN T27 Fix (rigid milling machine – not swivelling!) Year 2008 Operating hours: 493 h (see last picture) Motor power: 7.5 / 9.5 kW (amplified motor power) Rated current: 24 A Speeds: 3rd / 4th / 5th / 6th / 8,000 / 10,000 rpm Max. diameter milling tool: 250 mm Max. diameter of slitting tool: 350 mm electr. Height adjustment (stroke: 150 mm) Touch screen control (program memory: 100 / tool memory: 500) Table size: 125.5 x 90 cm Milling spindle: 30 + 40 mm MARTIN Cast Stop Jaws Engine brake Spindle blocking: pneumatic Central lubrication Suction nozzle: 2 x 120 mm Dimensions: 295 cm x 140 cm x 186 cm (L x W x H) Weight: approx. 1,300 kg Extras: Electrically adjustable table opening (infinitely variable) Electrical positioning of the milling fence (mechanical infeed jaw) Swivel device for milling fence Centrex Protection (Aigner) ...
Pneumatic driveThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
I sell an under-table milling machine FELDER HAMMER F3 . Built in 2022. The machine is like new. Main spindle motor 4 kW Spindle swivel 0–45° Additional spindle lock with Allen key from above. 4 speed levels, variable via the pulley: 3000–6000–8000–10,000 rpm. The milling machine set shown is included in the price. Available Same. With full documentation.
Weight: 10 kgYear: ca. 2009 : Table dimensions: mmMotor output: kWSpindle diameter: mmreus: U/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Automatic copying device: x ja/neinconverter: x ja/neinturning speeds: 11000 U/minNumber of knives: NA z=Diameter: NA mmLength: mmShank diameter: mmMotor output: kWDimensions (L/W/H): mmVertikal stroke: mmTable dimensions: mmDust suction hood: mmDiameter of the saw arbor: mmLength of the rolling table: mmSawblade tiltable: °milling stroke vertical: mmtotal power requirement: kwWeight: kgSpindle diameter: mmLength of the planing table: mmNumber of heads vertical: St.Number of heads horizontal: St.Number of milling agregates: St.Number of knives: St.Number of sanding units: st.Number of spindles: St.Number of spindle head vertical: St.Number of spindles head horizontal: St.Number of milling spindles: St.: St.Number of tools: St.Working width: mmYear: Speed of boring spindles: U/min.Required air-pressure: barDowel insertingunits: St.Electrical height adjustme ...
Chain milling machine Festo Lock box milling machine Type: PP Machine No. 80816 For wall mounting With door cover With many chains and swords Pneumatic workholding Slot width 8-16 mm Milling depth 175 mm Slot length 30 – 300 mm Clamping height 1000 mm Table adjustment longitudinal/transverse 250/70 mm Maximum wood thickness 230 mm Motor power approx. 2.2 kW Weight with pallet 180 kg Shipping dimensions 1200 mm x 800 mm x H 1100 mm
0: 4 St.0: 120 mmFeed speed: stufenlos, 3-18 m/min.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
0: 3 St.0: 80 mmFeed speed: (4 Stufen): 4/8/9/18 m/min.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Table milling machine DROMA Type FM-4 Machine No. 8301 Built in 1994 Motor power: 5 kW With engine brake Spindle left and right rotation Speeds 3000/4500/6000/9000 rpm Spindle diameter 30 mm Spindle clamping length 150 mm Extraction connection diameter 2x120 mm Milling fence with fine adjustment left and right Table size 1010 mm x 900 mm Front and rear table extensions Dimensions 1 piece 1200 mm x 750 mm, 1 piece 1000 mm x 720 mm Machine weight 700 kg Weight of the table extensions each approx. 20 kg Dimensions Machine 1500 mm x 1200 mm x H 1400 mm With table extensions, total length 3220 mm Loading dimensions 1 pallet 1500 mm x 1200 mm x H 1600 mm Weight approx. 710 kg 1 pallet 1200 mm x 800 mm x 1200 mm, weight approx. 60 kg
SPECIFICATIONS: Shaft: Ø 40 mm Table size: 1100 x 900 mm 1 4-roller drive Installed power: 6 HP
gebr. Chain mortiser HEMA Type: MC40 Year: 1995 Motor power: 2.2 kW (380V / 16A plug) Mortising depth: max. 180 mm Chain width: max. 40 mm Slot length: max. 230 mm Transverse stroke milling unit: 150 mm Table tilt: 45° Milling unit can be swivelled by 45° on both sides Weight: 350 kg incl. various chains and swords as shown 2 clamping levers have already been welded (see the last two pictures) Manufacturer
SCM T110 spindle moulder in accordance with CE standards. Availability from MAY 2025. Additional data to be collected upon arrival in our warehouse.
Sold is a Sac chain chisel Loading facilities available Price is net plus VAT The machine can and should be viewed and tried out on site, as warranty or guarantee is excluded
Tool used 320x24x58, n 5600 - 2300 HW, BLAA further data on request
SC3503.11.001 BB3503.11.001 68-92 mm further data on request
Slot counter spigot outside inside
BACCI FC 8 2500 linear milling machine Working length 2500mm Working width 200mm Working height 180mm Number of units 8 Milling 7.5kw Milling 7.5kw Milling 5.5kw Milling 5.5kw Grinding/milling 4.5/3.3kw Grinding/milling 4.5/3.3kw Sanding 3kw Sanding 3kw Hydraulic feed Working speed 0-15m/min Return speed 50-100m/min Year of production 2004 CE Certified Machine weight 5100kg
Profiling Rod for Sibo Taus 2 1/2 Styles Working diameter 18-63mm 5.5kw main motor Minimum workpiece length 470mm Feed speed adjustable via variator Possibility of production of elements such as: billiard cues, handles for brooms, shovels, rakes or chair legs
Profilcut Tool Set Leitz Front Door as good as new Item No.: SE 220 1 50 4800-10600 Y30 ET 952141/711001 MAN
Swivel spindle milling machine Brand: Panhans type 245 10 New machine Technical data: Engine power: 5.5 kW / 7.5 hp table size: 1100 x 760 mm table height: 870 mm clamping height: 140 mm height adjustment: 140 mm speed: 3000 / 4500 / 6000 / 9000 rpm space requirement: 1145 x 1180 mm Net weight: approx. 800 Table milling machine with double-sided swiveling fixed milling spindle for the swiveling range from -5° to +45,5°. handwheel adjustment with analog dial gauges Belt quick tensioning device Electr. speed indicator Left and right rotation cutter quick clamping device fine planed cast iron table with rigid frame support Milling stop 215 total adjustment via handwheel incl. multiplex stop plates mechanical motor brake milling protection and pressure device GAMMA V 1629 curved milling fence 1639 Tapoa
new CNC Nestingmachine, Brand: INFOTEC Type: 4621 EVO GO Technical data: Working range X axis: 2150 mm working range Y axis: 4600 mm Working range Z axis: 250 mm X / Y axes speed: 60 m/min Z axis speed: 12m/min Drill head grid 32 12 vertical spindles 8 horizontal spindles 1,7 kW System INFOTEC - EVO GO Automation of horizontal drilling in 18 mm panels (patent pending) Lateral drilling zone (requires drilling unit 12/8/2 LL) - Special unit for the C axis, which allows the transfer of the cut workpieces to the drilling zone. Can be rotated 0-90 degrees. (C-axis required) Optional: - Extension of the working area in the Y-axis up to 4600 mm. (Total length of the machine set with unloading table for EVO GO is: 9100mm). - Lateral drilling range: X: 2150 mm, Y:1300 mm Dimensions of side drilling elements: - 1600 x 600 x 18 mm - maximum, - 500 x 80 x 18 m ...
CNC processing centre Brand: IMA Type: BIMA 310V 120/600 Year: 2004 Technical data: Machining area - in X-direction without gluing 6000 mm - in X-direction motor gluing 5000 mm - in Y-direction 1200 mm - in Y-direction with main spindle + WZ-Ø 20 mm 1300 mm max. clamping height from Upper edge of suction plate Z1 100 mm max. workpiece thickness Z 2 depending on equipment/application Worktable height: approx. 950 mm 1 main spindle with feed stroke pneum. - Drive power: 12 kW in S-1 operation - Tool holder: HSK F63, taper diameter =38 mm - Tool feed: automatic - Pull-in force: 11000 N - Tool weight: max. 6 kg - Direction of rotation: right/left rotation, programmable - Speed range: stepless 1500 - 24000 rpm, programmable - Drive: frequency-controlled three-phase motor Spindle lubrication: unique factory grease lubrication - spindle cooling: water cooling ...
Christoph Busch GmbH
