used Numerically controlled machining centres for sale

x-travel: 1200 mmy-travel: 600 mmz-travel: 800 mmControl: Heidenhain type: TNC 426 table surface area: 1250x630 mmworkpiece weight: 1000 kgTool changer: 24 spindle taper ISO: 40 turning speeds: 30-8000 U/mintotal power requirement: kWweight of the machine ca.: 7,5 tdimensions of the machine ca.: 4,2x3,3x3,15 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1200 mmy-travel: 600 mmz-travel: 800 mmControl: Heidenhain type: TNC 426 table surface area: 1250x630 mmworkpiece weight: 1000 kgTool changer: 24 spindle taper ISO: 40 turning speeds: 30-8000 U/mintotal power requirement: kWweight of the machine ca.: 7,5 tdimensions of the machine ca.: 4,2x3,3x3,15 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 650 mmy-travel: 540 mmz-travel: 620 mmControl: Heidenhain type: iTNC 530 table surface area: 800x540 mmTool changer: 20 Posspindle taper ISO: 40 turning speeds: 50-10.000 U/minCooling through the spindle: 20 barworkpiece weight: 600 kgtotal power requirement: 14 kWweight of the machine ca.: 4,2 tdimensions of the machine ca.: 2,4x2,1x2,9 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Vacuum pump Becker Type VT 3.40 Machine No. D1180485 Built in 1991 Speed 1420 rpm. Suction volume 40 m³/h Suction pressure -900 mbar Motor power 1.25/1.5 kW

Axes Strokes X = 3706mm Y = 2294mm Z1 = 515mm Z2 = 371mm Max rotation 24000 rpm C axis = 360 deg non-stop rotation B axis = 360 deg non-stop rotation 16 position revolver toolchanger

I sell a 4-axis CNC machining center Biesse Rover 24L with truss table Year of construction 2004. Configuration: 4-axis main spindle HSD freshly fully repaired / Water-cooled RS1600 Tool magazine 7 positions ISO30 on the head 1x groove saw X-direction Drill head 14+4+2 drilling spindle Usable work surface 4500x1330mm. 2 work surfaces, 4 clamping zones Automatic system of Central Lubrikazion Combined power 35kW XDNC 2.01 software with operating instructions. Pump Becker 250/300 m3/h. 5,5KW Additional vacuum for stencil work or additional clamping devices. Good condition. Available from stock. Need for repair: handles on the truss table, Rotazion from ISO30 magazine on the head

Processing Manufacturer: Biesse Model: Rover 335 ATC Working range: approx. 3200mm x 950 mm Drilling spindles vertical: 24 pcs. Drilling spindles horizontal: 10 pcs. Milling unit: 7.5 KW

BIESSE ROVER A 3.40 machining centre Working Range X: 3060mm Working range Y: 1260 mm Working range Z: 150 mm Number of electrospindles: 1 Main motor 12 kW Tool magazine slots: 18 Vertical drilling spindles: 14 Machine Table: Traverse Table Software: BIESSE BIESSEWORKS ADVANCED + additionally on board Machine control: BIESSE XP 600 - Manual control panel: Yes Fabric stands: yes ( new suction cup rubbers ) - BIESSE ATS: Yes Fixed mounting points for chiller: yes Material clamping system: HSK-F63 Horizontal drilling spindles in the X-axis: 4 Horizontal drilling spindles in the Y axis: 2 Sawing unit: in X direction - Boom Design: Yes Number of traverses: 6 Vacuum pump: Yes Vacuum pump capacity m³/h: 90 - CAD (.dxf) reading interface: yes

I sell radius copy milling unit for edges suitable for CNC machining center machines with edge banding HOMAG, WEEKE, BIESSE, SCM, MORBIDELLI, HOLZ-HER, IMA, FELDER, MASTERWOOD, BUSELLATO, etc. n 12,000 rpm. Radius R2mm. HSK63 posture. Available the same.

Cnc machining center IMA BIMA 310 V 120/160 B.j 2004 Equipment: - Dyna Poin Armoury Table BIMA 410 V Cgvpa9u89o - 4 Seat occupancy - Edge gluing part Specifications: Machining area - in X-direction without gluing: 6000 mm - in X-direction mot gluing: 5000 mm Jyox3u - in Y-direction: 1300 mm - in Y-direction with main spindle + WZ-Ø 20 mm: 1630 mm - in Y-direction with gluing: 1450 mm

CNC processing centre Brand: IMA Type: BIMA 310V 120/600 Year: 2004 Technical data: Machining area - in X-direction without gluing 6000 mm - in X-direction motor gluing 5000 mm - in Y-direction 1200 mm - in Y-direction with main spindle + WZ-Ø 20 mm 1300 mm max. clamping height from Upper edge of suction plate Z1 100 mm max. workpiece thickness Z 2 depending on equipment/application Worktable height: approx. 950 mm 1 main spindle with feed stroke pneum. - Drive power: 12 kW in S-1 operation - Tool holder: HSK F63, taper diameter =38 mm - Tool feed: automatic - Pull-in force: 11000 N - Tool weight: max. 6 kg - Direction of rotation: right/left rotation, programmable - Speed range: stepless 1500 - 24000 rpm, programmable - Drive: frequency-controlled three-phase motor Spindle lubrication: unique factory grease lubrication - spindle cooling: water cooling  ...

3-axis machine for milling and drilling Working dimensions: X - axis: 4,000 mm Y - axis: 1,200 mm 6 workpiece supports 4 lifting rails for positioning heavy workpieces Rear row of stops medium row of stops (especially facilitates the assignment of the machine with small workpieces) Left-hand and right-hand stops on the side 20 pcs vacuum cups Vacuum pump 90 cbm/h incl. coolant unit for main spindle Stepping mat protection in front of the machine Machining equipment: Milling unit 7.5 kW, 1,500 - 18,000 rpm Tool holder HSK 63 F Spindle water-cooled with separate cooling system Tool change magazine 8 times moving along with the milling spindle Drill head with 21 vertical drilling spindles, pitch 32 mm Spindles can be called up individually ATTENTION: 1 spindle defective Horizontal drill head with grooving unit in crosshead design 0 / 90 degree sw ...

CNC for doors or stairs Boom machine with console table 4-axis x- axis 5000 mm Y-axis 1350 mm z- axis 450 mm a- axis 190 degrees Double occupancy at the table Machine has run little

max. workpiece length: 4400 mmprofile spindle: 1 Stückmain drive: 19,2 kWControl: Beckhoff CNC machining center MASTERWOOD 4 WIN---------------------------------------------------------STOCK MACHINE: Immediately available!Specially designed for a rational and flexible wooden window u.door productionHIGHLIGHTS:- Different tool magazines for optimal tool loading- Simultaneous loading of 4 workpieces- Patented clamping system for optimal processing of the workpieces- CNC controlled work table with automatic positioning of beams andStretcher- Automatic re-clamping for changing between external and internal profiling- INTEGRATED window construction software, i.e. the machine does not have to (but canof course) can be controlled from the office with external industry software.- strong motor with 19.2 kW HSK-63 EPlease note that this stock machine is with us in Oberkochen andis already equippe ...

x-travel: 4000 mmy-travel: 600 mmz-travel: 800 mmcontrol: Heidehain 430 Weight: / kgvoltage: 400 Vturning speeds: 9000 U/minmax. table load: 2700 kgrapid traverse: 30 m/minfeed: 30 m/minCone: SK40 total power requirement: 48 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mmy-travel: 500 mmz-travel: 610 mmControl: Fanuc type: 18 M table surface area: 1000x500 mmTool changer: 24 spindle taper ISO: 40 turning speeds: 8000 U/mintotal power requirement: kWweight of the machine ca.: 5,8 tdimensions of the machine ca.: 4,2x3,3x3,15 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1000 mmy-travel: 1040 mmz-travel: 750 mmcontrol: Heidenhain TNC 426 turning speeds: 15000 U/mintotal power requirement: 40 kWweight of the machine ca.: 10,1 trequired space: / mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC machining center Manufacturer: MKM Model: UNI_Compact Year of construction: 1999

Key data: 900 mm, 2600 mm, 80 mm

Model Author 503, 3 axis machine, x = 900 y = 2600 Z = 80, with groove saw, 1 x milling, T dowel drilling 18 + 3 on the front side, 2 + 2 from the back and front 1 x, year of manufacture 95

It functions, works properly, is occasionally used in specialist milling and drilling of furniture. Very simple, trouble-free and graceful equipment. 16 drilling spindles, 2 electrospindles, saw unit, Becker vacuum pump. Trio 6000 control.

x-travel: 1250 mmy-travel: 800 mmz-travel: 240 mmcontrol: Siemens turning speeds: 45 - 3600 U/mintotal power requirement: / kWweight of the machine ca.: 9 trequired space: / mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working length X: , mmworking length Y: , mmNumber of milling agregates: , St.Number of boring motors: , St.Stegherr type KF counter milling machine for windows and doors--------------------Machine can still be seen in use--------------------Manufacturer description:The Stegherr type KF counter milling machine is a machining centerfor cutting, counter-milling and drilling wing andFrame timbers for the countered corner connection in doweledor screwed version.The excellent quality of the counter connection is ensured by twocounter-rotating milling spindles. Become at the same timethe holes for the screw or dowel connectionexecuted. The dowels can also be used in the same operationbe pressed in straight away.The flexible concept of the Stegherr Koncontraräse KF allowscountless expansion levels with different engine variants,Spindle lengths and mounts, pneumatic or servodriven lifting spind ...

Troughfeed boring machine Make: VITAP Type: ACOUSTIC For creation of acoustic panels for noise reduction Boring machine with through feed panel, boring from the bottom and automatic panel return to the operator. Three controlled axes: - X Axis - Panel movement by means of a strong pneumatic clamp - Y Axis - Boring head movement - Z Axis - Panel boring - Newly patented, high rigidity boring head movement on Y and Z axis. - Constant Side pusher: Side pusher with constant preload for perfect positioning of the panel on the machine zero point. - New frontal and more user friendly tool change system No limit in panel length High productivity and flexibility - The drilling head processes several holes at the same time - Different grids are possible also drilling grids with shift - Different drilling heads are optional available Easy TPA programming - Control: F ...

Grooving machine for throughfeed process Brand: Vitap Type: Grooving New machine For the processing of acoustic panels Processing unit: - Shaft with 7 presettable saw blades, distance 30mm. - Blade thickness 4mm - Rotation of the shaft , 7000 rpm. - presetting with rapid hook HSK - Max diameter of the blade 125mm Workpieces: - Max. thickness of the panel 50mm - Max weight of the panel: Kg 50 - Max panel size : X no limit, Y 1200 mm, Z 50 mm - Min panel size: X 400 mm, Y 300 mm, Z 12 mm - Panel feeding speed : 25m/min Characteristics: 3 controlled axes: - X Axis - Panel movement with two dinamic clamps - Y Axis - Grooving head movement with pinion and precision rack - Z Axis - Movement with screw at spherical recirculation - Newly patented, high rigidity operating unit movement on Y and Z axis. - Constant side pushing to keep the 0-line - Positioning ...

CNC punching machine Brand: Vitap Type: MICRA New machine High-Performance CNC machine for the production of acoustic panels with Micro-Perforation - Every 4 seconds the punching of 1.000 up to 2.331 holes are possible (depending on the workpiece) 3 controlled axes: - X-axis: drive via 2 motors and planetary reduction gear, guidance via pinion and rack - Y-axis: drive via 1 motor and planetary reduction gear, guidance via pinion and rack - Z-axis: drive via central hydraulical unit Easy handling with TPA control - Virtual display of programmed punching holes in the CAD environment - Optimization software for the working process - LCD TFT Monitor 20 - USB port - Basic Version CAD TPA - Macro programming Processing head - 5mm grid in X- and Y-direction - Punch depth: 3mm - Changable punching tools The processing head can optionally be customized ...

CNC machining center WEEKE Type: BHC 280 Woodwop 5.0: Year: 2005 4 Axes

CNC processing centre Brand: Weeke Type: Optimat BHC 655 Year: 2004 - axis movement (X-/Y-/Z-direction) via a compact linear guide system, dust-protected - ball screw spindle (Y- and Z-direction) and rack and pinion drive (X direction) Software: WOODWOP, machine data acquisition, provision of teleservice BASIS-table basic equipment 6 traverses 1 low-maintenance vacuum pump with 100 m³/h output 6 traverses, continuously adjustable in the X direction 4 program-controlled workpiece stops, mounted as a rear row of stops 6 program-controlled workpiece stops, mounted as a front row of stops 2 side stops mounted on an aluminium profile in Y-direction, which can be switched off manually when oversized workpieces are being processed. The side stops can be adjusted manually in Y-direction. 6 workpiece lifting arms for heavy workpieces Milling spindle HSK 9 kW (S6 50%), l ...

Type 1325 Useful working area axis X-Y-Z 1300-2500-200 mm Spindle, air-cooled, 6kw, 18000 rpm. Engine Hybrid servo Drive system LAAK Work table vacuum plate Vacuum pump 7.5kw Maximum speed 25,000 mm/min (x y) 10,000 mm/min ( Z ) Working speed 10-15M/MIN Power 380V/50HZ Code G Transport dimensions 3200x2100x1800mm Weight 1600 kg Price 9600 Eur (EXW Jonava, Lithuania)