Manufacturer:
(Category: 102)
The machine is in good technical condition, after prior agreement it is possible to test it. Control unit Hurco Max Turning diameter 254 mm Turning length 340 mm Range over bed 405 mm Range over cross feed 230 mm Length between centers 403 mm Bar capacity 45 mm X-axis movement 177 mm Z-axis movement 355 mm Spindle speed 6000 rpm. Motor power 11 kW
Key data: 20 mm, 205 mm
Star ECAS 20 CNC Swiss Automatic Lathe CNC control Star NICS (Yaskawa-Siemens 840DI) Turning diameter 20 mm Turning length 205 mm Spindle diameter 20 mm Spindle speed 500-10,000 rpm Spindle motor 3.7/2.2 kW Min. indexing C-axis main spindle 0.001° Min. indexing C-axis subspindle 0.001° Number of tools on the tower 16x Spindle torsion driven tools 8,000 rpm FMB Turbo 3-26 (3200) LxWxH 6850x1150x1765 mm If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.
turning diameter: 376 mmturning length: 1245 mmcontrol: FANUC i-Series turning diameter over bed: 376 mmx-travel: 230 mmz - travel: 1350 mmrapid travel x/y/z: 24/30 m/minmain spindle speeds:: 2800 spindle motor: 35 / 26 kWmax. torque on the spindle: 1613 Nmspindle passage: 102 mmtotal power requirement: 33,91 Kvaweight of the machine ca.: 7 tdimensions of the machine ca.: 4,6 x 2,11 x 2,3 mEquipped with:- Fanuc i-Series CNC control- C-axis- 3-jaw chuck, 304 mm diameter- 12-station tool turret- Tailstock- Chip conveyor- CEOnly 2,300 spindle hoursThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CNC controller: Mitsubishi M730UM (CELOS - ERGOline Touch) Capacity X-axis travel mm: 260 Y-axis travel mm: ±50 Z-axis travel mm: 795 Turning length mm: 705 Max. turning diameter mm: ø: 366 Swing over bed mm: ø: 920 Swing over cross-slide mm: 740 Bar work capacity mm: 80 Tool magazine Magazine places: 20 Tool holder: BMT40 Upper turret Number of tool slots St .: 20 Speed driven tools RPM: 10.000 Drive power driven tools kW: 5.5/4.9/4.2 (3 min/5 min/cont) Rapid Feed Rate: 30 Main spindle Speed spindle rpm: 4.000 Drive power spindle kW: 18.5/18.5/15 (25%ED/50%ED/cont) Maximun torque Nm: 49 Counter spindle Speed spindle rpm: 5.000 Drive power spindle kW: 11/7.5 (25%ED/cont) Maximun torque Nm: 22 Counter spindle travel mm: 734 Coolant system Tank capacity liter: 366 Equipment Electronic Handwheel Chip conveyor Signal lamp High pressure pump Measuring probe ...
Control Winmax Turning diameter 335 mm Turning length 550 mm Spindle speed 3000 rpm Tailstock 12-Station Turret with Driven Tools VDI 40 Chip Conveyor, IRCO Short Bar Feeder IRS-RBK 1001 Tool Measurement Parts catcher
turning diameter: 1800 mmturning length: 600 mmcontrol: Siemens 6 - Jaw Chuck: ? spindle bore: 130 mmspindle nose: DIN 55027 Größe 11 turning speed range: 1 - 400 U/minmax. torque on the spindle: 9000 total power requirement: 38 / 52 kWweight of the machine ca.: 25 tdimensions of the machine ca.: 6x3x2,5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 340 mmturning length: 1.135 mmcontrol: Sinumerik 840D Program on: ca. 22.000 hturning diameter over bed: 700 mmspindle distance: 1.470 mmtotal power requirement: kWweight of the machine ca.: 14.5 tdimensions of the machine ca.: 5.614 x2.417 x 2.419 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning length: 2000 mmgreates pass round over bed: 630 mmswing diameter over slide rest: 350 mmcontrol: Monforts Control System K bed width: 550 mmturning speed range: 2 - 1800 U/minspindle diameter in front bearing: 120 mmspindle head DIN 55027 - Size: 8 tool taper: RD2 PARATquill stroke: 210 mmspindle bore: 71 mmtotal power requirement: 30 kWweight of the machine ca.: 5 tdimensions of the machine ca.: 4,90 x 2,10 x 2,00 mThree-jaw chuck / key bar / Ø250mmFour-jaw chuck3-jaw chuck for tailstock4-station tool post head PARATFixed steady rest, Ø smallFixed steady rest, Ø largeVarious chuck jaws, live centers, live centers, tool holdersChip conveyor with coolant pumpThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A CNC compact turning machine Eguro is available. Turning diameter: 350mm, machining diameter: 200mm, turning length: 200mm, speed: 5000rpm, bar capacity: 1inch, travel X/Z: 250mm/250mm, rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 1500mm/1500mm/1200mm, weight: approx. 1250kg. An on-site inspection is possible.
The machine is in good technical condition, testing possible after prior agreement. Max. rotating diameter 480 mm (approx. to the current design of the workpiece removal blade) Max. machined diameter 340 mm Max. turning length 785 mm Collet + 10 hydraulic chuck B210-A06-01, 3x soft jaws (Schunk KM-WBL 103) 1x hard jaws (Schunk SHB-J 100) hydraulic through-cylinder SS 1770, draw tube Main spindle Spindle with JIS A2-6 end, bore dia. 80 mm, integrated motor Speed range 45 - 5,000 min-1 Power/continuous operation 22 kW/15 kW Continuously controlled C-axis, 3600 with 0.001 increment Secondary spindle Speed range 50 - 6,000 min-1 Power/continuous operation 11 kW/7.5 kW Spindle with end dia. 14O mm, bore dia. 62 mm, integrated motor Continuously controlled C-axis, 360° with 0.001° increment Collet + 6" hydraulic chuck B206-01, 3 x set of soft jaws (Schunk KM-WBL 62) hydraulic thr ...
spindle passage: 80 mmmax. turning diameter: 395 mmMax. Turning length: 750 mmcontrol: System TX 8H max. Spindle speed: 3.150 U/min.CNC lathe | TRAUB - TNA 400The machine is in a well-maintained condition.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags:TNA400 | TNA-400The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle passage: 80 mmmax. turning diameter: 460 mmMax. Turning length: 1.000 mmcontrol: System TX 8F max. Spindle speed: 2.800 U/min.CNC lathe | TRAUB - TNA 500The machine is in a well-maintained condition.The machine videos from the production plant will be shared on request.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags:TNA500 | TNA-500The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
control: Fanuc 31/32 i : 2 chucking diameter: 170 mmswing diameter: 210 mmx-travel: 400 mmz-travel: 200 mmlength: 2500 mmwidth: 1900 mmheight: 2300 mmweight: 5500 kgturning height: mmturning diameter: mmswing diameter: mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A Doosan CNC lathe is available. Turning diameter: 300mm, turning diameter over bed/face slide: 550mm/390mm, max. turning length: 510mm, travel path X/Z: 205mm/580mm, rapid traverse: 24m/min, C-axis: 360°, bar capacity: 65mm, spindle bore: 76mm, speed: 4500rpm, tool stations: 12. Machine dimensions X/Y/Z: approx. 3500mm/1650mm/1800mm, weight: approx. 4250kg, control: Fanuc Series 18i-TB. Documentation vorhanden. An on-site inspection is possible.
Used machine CNC lathe Machine type: DMG Gildemeister NEF 600 Control: Heidenhain IT Turn Plus Year of Make: 2006 TECHNICAL DATA: Max. turning length: [mm] 1,250 Max. Rotary Ø over bed: [mm] 600 Max. rotary Ø over slide: [mm] 410 Spindle bore: [mm] 90 Number of controlled axes: 2 Speed range: [1/min.] 3,000 Drive power: [kW] 36.5 / 27.5 Torque: [Nm] 785 Tailstock MK 5 Quill 80mm Number of turrets: 1 Travel X-axis ob. Rev. / unt. Rev.: VDI 40/8 Tool positions: 8 Machine weight: [kg] 5,500 Space requirement (LxWxH): [m] 5.0 x 2.0 x 2.2 m Features: Chip conveyor 3-jaw chuck [mm] 315 This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.
Used machine Machine Type: CNC Turning Center Model No.: CLX450V4 Manufacturer: DMGMORI Control: SLIMline® Multi-Touch Contr./Fanuc Year of manufacture: 2023 #001354 TECHNICAL DATA: Turning diameter max. approx. 400 mm Turning diameter standard approx. 310 mm Chuck size approx. 260 mm Turning length approx. 755 mm Rod diameter max. spindle/chuck approx. 80/78 mm Turret stations approx. 12 X-axis approx. 276 mm Z-axis approx. 830 mm Y-axis approx. 120(+-60) mm Tailstock approx. 800 mm Spindle speed approx. 4000 rpm Speed AGW max. approx. 4000 rpm Rapid traverse X/Z approx. 30/30 m/min Rapid traverse Y approx. 22.5 m/min Footprint L x W x H approx. 4.30x2.45x2.30 m (with chip conveyor) Machine weight approx. 6,250 kg Main spindle A2-8" 17 / 25.5 kW (100/40% ED), 4,000 rpm - 3-jaw chuck - Differential Compressive Stress for the Main spindle - Foot control ped ...
Used machine Machine type: CNC turning and milling center Model: CTXalpha 500 V6 Manufacturer: DMGMORI Control: Celos with Siemens 840D si First commissioning: 2022 #001272 Technical data Turning diameter max. approx. 240mm Turning diameter standard approx. 200mm Chuck size approx. 210mm Turning length approx. 480mm Rod diameter max. approx. 52/option65mm Turret Stations 12 X-axis approx. 210mm Z-axis approx. 525mm Spindle speed 1/2 approx. 5000/6000 rpm Speed AGW max. approx. 5000U/ Rapid traverse X/Z/Y 30/30/22.5 • Main spindle 5000 Ulmin • Hydraulic 3-jaw chuck 210 mm • Sub-spindle 6000 Ulmin • Hydraulic 3-jaw chuck 170mm • 12 station turret VDI 30 Trifix • Tool drive for all stations • C-axis • Y-axis • Alternating speed • Coolant supply through the sub-spindle • Swivelling tool presetter • Coolant spray gun, 5bar • CTXalpha ...
Used machine Machine Type: CNC Swiss Automatic Lathe Model: Sprint32/8 Manufacturer: DMGMORI Control: Fanuc 32i First commissioning: 2019 #001328 Location: Germany T-main and sub-spindle - Y-axis on carriage 1 - Y-axis on carriage 2 - C-axis on main spindle - C-axis on sub-spindle - Tank for chips included Coolant Pump - Workpiece unloading belt - Flushing for counter-spindle pliers - Hinge belt chip conveyor - Signal lamp 4-colour - IEMCA Boss 338/32HD bar feeder This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.
Inv. Num. : 9006 Type: SK 12 Producer: TOS Created: 1959 Parameters: Table diameter: 1120 mm Maximum workpiece weight: 5000 kg Max. workpiece height: 1000 mm Max. workpiece diameter: 1250 mm Weight: 19500 kg
Key data: 1600 mm, 3500 mm, 800 mm
For sale is: 1 Piece Used Face and Lace Lathe Manufacturer: Werkzeugmaschinenfabrik Zerbst GmbH Type: DP1 / S3 x 3500 Year of manufacture: 1994 Technical data: Largest turning diameter over bed: 1,600mm Center width: 3,500mm Spindle bore: 100mm Face plate diameter: 1,250mm Total mass of the machine: approx. 24.8t incl. documentation Further pictures and videos can be sent on request. The following things have been renewed/repaired on the machine in the last four years: At the end of 2022, the tailstock was completely overhauled. New bearing and new tip and lubrication. 2024 Cross Support regenerated. Refurbishment of the wedge strips with new sliding coating, snatchers on the guideways smoothed by scraping, Bearing seats of the spindles made smooth, wedge strips in the contact surface and covering surface scraped. Lubrication pump cle ...
Inv. Num. : 9004 Type: SK 12 Producer: TOS Created: 1962, GO 1982 Parameters: Table diameter: 1120 mm Maximum workpiece weight: 5000 kg Max. workpiece diameter: 1250 mm Max. workpiece height: 1000 mm Weight: 19500 kg
Inv. Num. : 9003 Type: SK 12 P1 Producer: TOS Created: 1961, GO 1980 Parameters: Table diameter: 1120 mm Maximum workpiece weight: 5000 kg Max. workpiece diameter: 1250 mm Max. workpiece height: 1000 mm Weight: 19500 kg Equipment: DRO
Used machine Machine type: CNC turning and milling center Model No.: CTXgamma1250TC4a Manufacturer: DMGMORI Control: Celos with Siemens 840D si First commissioning: 2020 #001348 Location: Germany Technical data - Main spindle as integrated spindle motor, ISM102 - Sub-spindle as integrated spindle motor, ISM 76 - tailstock function for the sub-spindle - C-axis and spindle brake (hydr.) - Chuck rinsing device of the main spindle, external - Absolute, direct displacement measuring systems X-'Y-'Z1-axis - Differential stress main spindle - 36-cavity tool disc magazine - Hinge belt chip conveyor - Coolant system 8/20/80 bar - Coolant supply through the sub-spindle - Coolant spray gun - Mechanical oil mist separator - Automatic work area door - Workpiece probes - Tool turret at the bottom This offer is subject to change and non-binding. Changes, errors and prior ...
Used machine CNC turning-milling center Machine type: DMG MORI CLX450TC Control:DMG MORI SLIMline® Siemens Operate Year of Make: 2022 Location: Germany #0011281 Technical data Turning diameter max. spindle 1+2 approx. 400 mm Turning diameter standard spindle 1+2 approx. 250 mm Rod diameter max. spindle 1 approx. 65 mm X-axis approx. 750 mm Z-axis approx. 1,100 mm Y-axis approx. +-100 mm A-axis (spindle 2) approx. 1,200 mm B-axis approx. 240° (+-120°) mm Spindle speed 1+2 approx. 5,000 rpm Speed milling pindle approx. 12,000 rpm Rapid traverse X/Y/Z approx. 40 m/min Rapid traverse A spindle 2 approx. 40 m/min Rapid traverse B axis approx. 70 m/min Power spindle 1+2 max. approx. 17 (40%) kW Power milling spindle max. approx. 10.5 (40%) kW Facilities Main Drive Spindle 1/2 17KW 40% - 5000rpm - Turning-Milling Spindle HSK63 10,5KW 40% - 12,000rpm - tool magazi ...
Used machine Machine Type: CNC Turning Center Model: CLX 750 V3 Manufacturer: DMGMORI Control: SLIMllne® Multi-Touch Control Siemens Year of Make: 2021 Location: Germany #001273 Turning diameter max. approx. 700 mm Turning diameter standard approx. 610 mm Chuck size approx. 400 mm Turning length approx. 1,300mm Rod diameter max. approx. 127 mm Turret stations approx. 12 X-axis approx. 435 mm Z-axis approx. 1,300 mm Tailstock approx. 1,200 mm Spindle speed max. approx. 2,000 rpm Speed AGW max. approx. 4,000 rpm Rapid traverse X/Z approx. 30 m/min Compressed air bar,L/min approx. 5, 100 bar,L/min Machine weight approx. 10,200 kg Facilities - Main spindle A2-11" with AC motor, 36/46 kW (100/40%), 2,000 min-¹ - 3-jaw chuck 300mm - Partial hollow clamping device for the main spindle 127mm - Chuck flush for the main spindle - 12-fold servo tool turret mount VDI ...
CK 50 CNC turning center was built in 2022. This state-of-the-art, extremely efficient machine is used in both unit and series production. Workpieces with a maximum diameter of 570 mm and a length of 500 mm are machined by means of a reliable spindle and cutting tools taken from a 12-position turret. The spindle, driven by a high-powered motor reaches a speed of 4200 rpm and moves in two X,Z axes with feeds of 270 mm and 610 mm respectively. The hydraulic tailstock, in turn, ensures precise positioning and support of the workpiece during the turning process. The CNC CK50 lathe has an inclined bed, which increases the stability of the design through better distribution of loads during machining. This solution reduces the risk of vibration and oscillation, thus increasing turning accuracy and giving the ability to perform more complex operations. It also makes it easier to evacuate the ...
CORMAK CK7150LT12x1000 CNC lathe was built in 2025. The machine has only undergone a test run and has never been in operation, it is like brand new. CORMAK CK7 is an extremely versatile machine designed for precision machining of parts made of non-ferrous metals, ferrous metals and non-metals. It is capable of performing operations such as turning of cylindrical, conical and end faces, as well as boring, grooving and threading. Workpieces with a maximum diameter of 500 mm are machined by means of driven tools and a spindle rotating at a maximum speed of 3000 rpm. The machine’s compact design ensures a high degree of stability during even the most intensive challenges, as well as facilitating daily operation and maintenance. All this makes the offered CORMAK CK7150 LT12 CNC lathe the best choice for companies specialising in the machine tool or automotive industry. The total weight o ...
turning diameter over bed: 1450 mmturning diameter over slide rest: 950 mmturning length: 4000 mmcentre height: 725 mmfaceplate diameter: 1000 mmtravel -x axis: 980 mmtravel -z axis: 4000 mmworkpiece weight: 2 toturning speed range: 1,5 - 1000 U/minspindle hollow: 500 mmControl: Siemens 828D total power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - m- CNC Control Siemens 828D- Front and Rear 1000mm dia. 4 – chucks- Tailstock- Chip Conveyor- Boring Bar 1500 mm x 120 mm- Boring Bar 1690 mm x 120 mm- Boring Bar 1000 mm x 80 mm- Boring Bar 1500 mm x 100 mm - Quantity of KM ToolingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A conventional lead and feed screw lathe Antonio Anslemi is available. Center height: 260mm, center distance: 1500mm, swing diameter over bed/support/gap bed: 520mm/320mm/670mm, bed width: 370mm, speed: 1400rpm, tailstock quill diameter: 65mm, tailstock stroke: 240mm, machine dimensions X/Y/Z: approx. 3000mm/1200mm/1500mm, weight: approx. 2500kg. An on-site inspection is possible.
