Manufacturer:
(Category: 102)
This 5-axis Okuma LB3000EX MYW was manufactured in 2008. It features a maximum turning diameter of 360 mm and a Z-axis travel of 1000 mm. The machine is equipped with a twin spindle configuration and a control system OSP-P200. If you are looking to get high-quality turning capabilities, consider the Okuma LB3000EX MYW horizontal turning machine we have for sale. Contact us for further details.
This 9-axis Okuma MAC TURN 350-W was manufactured in 2011. It features a maximum turning diameter of 550 mm and a distance between centers of 1500 mm. The machine is equipped with a powerful main spindle and sub-spindle, both capable of 3800 rpm, and a milling spindle speed of 12,000 rpm. If you are looking to get high-quality turning and milling capabilities, consider the Okuma MAC TURN 350-W turn-mill centre we have for sale. Contact us for further details.
This 4-axis DOOSAN Puma 2600YB II was manufactured in 2019. It features a maximum turning length of 725 mm and a swing over bed of 780 mm. The machine is equipped with a FANUC i Series controller and includes 12 turret stations for enhanced productivity. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma 2600YB II machine we have for sale. Contact us for further details.
This 3-axis Okuma GENOS L200E-M was manufactured in 2010. It features a maximum turning diameter of 200 mm and a turning length of 380 mm. The machine is equipped with a spindle speed of 4,500 rpm and a main spindle power of 11 kW. If you are looking to get high-quality turning capabilities, consider the Okuma GENOS L200E-M horizontal turning machine we have for sale. Contact us for further details.
This 4-axis Okuma LU35-M was manufactured in 2008. It features a maximum turning diameter of 550 mm and a Z-axis travel of 920 mm. The machine is equipped with two revolvers, offering a total of 22 tool stations, and operates at a spindle speed of 3200 rpm. If you are looking to get high-quality turning capabilities, consider the Okuma LU35-M horizontal turning machine we have for sale. Contact us for further details.
- incl. Chip conveyor- incl. Chip crusher- Under power with - incl. spare rollers- Power on hours 23.000 H- Working hours ca 8.000 H
For sale is a high-quality lead and pull spindle lathe from the renowned German manufacturer Weiler, model Condor VS 1. The machine convinces with its high precision, robust construction and durability and is in a very well-maintained and technically perfect condition. Ideally suited for the workshop, single part production and precise turning work. General information: Machine Type: Lead and Pull Spindle Lathe Manufacturer: Weiler Model: Condor VS 1 Year of construction: approx. 1977 Condition: Well maintained, technically perfect Availability: Immediately available Technical data: Max. turning diameter over bed: approx. Ø 330 mm Max. turning diameter via support: approx. Ø 170 mm Max. turning length: approx. 800 mm Bar passage: approx. Ø 38 mm Spindle: Speed range: approx. 24 – 2,800 rpm Feed & Thread: Feed range: approx. 0.037 – 1.253 mm/rev ...
turning diameter: 320 mmturning length: 500 mmcontrol: Fanuc Oi-TD total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mFanuc Oi-TD cnc controlcollet chuck device10-fold revolvertail stockchip conveyorTechnische Daten: / technical detailsmax. Drehdurchmesser / max. turning diameter 320 mmmax. Drehlänge / max. turning length 500 mmX-Weg / X-travel 180 mmZ-Weg / Z-travel 520 mmmax. Drehzahl / max. spindle speed 6000 UpM /rpmAnzahl der Revolverplätze / number of tool places 10 Gewicht ca. / weight ca. 3200 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 1790 mmturning diameter over slide rest: 1250 mmturning length: 5000 mmfaceplate: 1250 mmworkpiece weight: 4500 kgcontrol: Siemens type: System 8 T mmturning speeds: 1,1-300 U/minsteady: mmsteady: mmtotal power requirement: 72 kWweight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us Morethan 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ...
turning diameter over bed: 1250 mmturning diameter over slide rest: 900 mmturning length: 5000 mmfaceplate: 1250 mmworkpiece weight in steadies max.: 20000 kgsteady: mmsteady: mmworkpiece weight: 16000 kgtotal power requirement: kWweight of the machine ca.: 22 tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us Morethan 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with Mo ...
Hoofdspindelmotor: 26 kW - max. spindelsnelheid: 4000 tpm Onderspindelmotor: 11 kW - max. onderspindelsnelheid: 6000 tpm Gereedschaprevolver met 12 stations (aangedreven) - max. snelheid: 4500 tpm (5,5 kW) Toolsetter / tool eye Mayfran spanentransportband De staafaanvoer is optioneel. MistCleaner is optioneel. De zwarte onderdelenvanger aan de voorzijde is optioneel.Swing over bed: 380 mm Distance centre tot centre: 504 mm Max longitudinal travel Z-axis: 625 mm Max cross travel X-axis: 234 mm Dia of spindle bore: 76 mm Power on the spindle: 18,5 kW Number of speeds: 4000 rpm Command: Mazatrol Matrix Nexus 2 Toolchanger: yes Number of tools: 12 positions
Hoofdspindelmotor: 26 kW - max. spindelsnelheid: 4000 tpm Onderspindelmotor: 11 kW - max. onderspindelsnelheid: 6000 tpm Gereedschaprevolver met 12 stations (aangedreven) - max. snelheid: 4500 tpm (5,5 kW) Toolsetter / tooleye Mayfran spaanband De stangaanvoer is optioneel. MistCleaner is optioneel. De zwarte onderdelenvanger aan de voorzijde is optioneel.Swing over bed: 380 mm Distance centre tot centre: 504 mm Max longitudinal travel Z-axis: 625 mm Max cross travel X-axis: 234 mm Dia of spindle bore: 76 mm Power on the spindle: 18,5 kW Number of speeds: 4000 rpm Command: Mazatrol Matrix Nexus 2 Toolchanger: yes Number of tools: 12 positions
Hoofdspindelmotor: 26 kW - max. spindelsnelheid: 4000 tpm Onderspindelmotor: 11 kW - max. onderspindelsnelheid: 6000 tpm Gereedschaprevolver met 12 stations (aangedreven) - max. snelheid: 4500 tpm (5,5 kW) Toolsetter / tool eye Mayfran chiptransporteur De stangaanvoer is optioneel. MistCleaner is optioneel. De zwarte onderdelenvanger aan de voorzijde is optioneel.Swing over bed: 380 mm Distance centre tot centre: 504 mm Max longitudinal travel Z-axis: 625 mm Max cross travel X-axis: 234 mm Dia of spindle bore: 76 mm Power on the spindle: 18,5 kW Number of speeds: 4000 rpm Command: Mazatrol Matrix Nexus 2 Toolchanger: yes Number of tools: 12 positions
2008 Spindle module replaced Circumferential diameter over bed 630 mm Circumferential diameter over support 370 mm Spindle through bore 105 mm the machine is delivered with a 250 mm manual chuck. Spindle speed range 1: 4 - 430 rpm. Spindle speed range 2: 430 - 2500 rpm. Main motor power: 18.5kw S6-40%
faceplate diameter: 2500 mmmax. swing diameter over bed: 2700 mmturning height: 2500 mmControl: Siemens 840D CNC workpiece weight max.: 30 tworkpiece dia.: 2500 mmCrossbar travel distance every 100 mm: 1200 mmPiston rod: 1500 mmram diameter: 250 x 250 mmtraversing speed: 8 m/minMax. vertical feed rate: 6000 mm/minMax. cross feed: 8000 mm/minSpeed of the machine table: 180 U/mintool changing time: 1 mincutting speed: 140 m/minCutting depth: 14 mmPower Capacity of main drive: 100 kWweight of the machine ca.: 47 tdimensions of the machine ca.: 12,5 x 8,0 x 6,7 mFeatures/Accessories: - Crossbars every 100 mm, including locking mechanism- 2 ram units with a cross-section of 250 x 250 mm, travel distance 1500 mm- Both ram units can be moved through the center (100 mm each, i.e., both ball screws are offset from each other with collision protection- ZF gearbox for main drive: AC 100 kW / S1 Sie ...
swing diameter: 2000 mmturning height: 1800 mmControl: Siemens Sinumerik 840 Dsl turning speeds range: 2,8-315 U/mincross rail adjustment - vertical: 1200 mmcross rail adjustment - horizontal: +/- 1150 mm: 1500 mmbit feeder section: 240 x 240 mmMinimum immersion diameter: 340 mmcutting capacity: 50 kNmax. torque on the faceplate: 50000 Nmspeed range step 1: 2,8 - 80 U/minspeed range step 2: 12 - 315 U/minMax. clamping weight: 12000 Kgpower capacity faceplate: 105 kWweight of the machine ca.: 33 tdimensions of the machine ca.: 10 x 5 x 6,5 mFurther technical data: - Feed range of three-phase servo motors: 1–3000 mm/min, 0.01–50 mm/rev - Crossbeam travel speed: 425 mm/minFeatures/Accessories - Increased turning height (+600 mm) - Z-axis extended to 1500 mm - Magazine capacity: 20 positions - Magazine type: disc magazine - Max. tool length: 525 mm - Chip conveyo ...
A precision lathe is offered: distance between centers: 1500mm, center height: 265mm, swing diameter over bed: 530mm, speed range: infinitely variable up to 2000rpm. Machine dimensions X/Y/Z: approx. 2700mm/850mm/1400mm, weight: approx. 2100kg. The brake has a problem. Inspection possible by appointment.
Main spindle: Technology: Motor spindle Speed: 4,000 rpm Power (max.): 29 kW Torque (max.): 250 Nm Bar Passage: 76 mm Sub-spindle: Technology: Motor spindle Speed: 5,000 rpm Power (max.): 29 kW Torque (max.): 250 Nm Ejector: Pneumatic Travel in Z: 800 mm Tool carrier I (X/Y/Z): Technology: 12-station turret Tool holder: VDI30 Tool drive: 5,000 rpm, 6.7 kW, 25 Nm Travel in X/Y/Z: 260/100/800 mm Rapid traverse in X/Y/Z: 30/12/30 m/min Tool carrier II (X/Z): Technology: 12-station turret Tool holder: VDI30 Tool drive: 5,000 rpm, 6.7 kW, 25 Nm Travel in X/Z: 210/800 mm Rapid traverse in X/Z: 30 m/min Equipment/accessories: Chip management: Chip conveyor Coolant management: IKZ system with paper belt filter and high pressure, 40 bar Raw material feed I: Robot interface prepared Raw Material Feed II: Bar Feeder Interface Prepared Finished part removal ...
Key data: 650 mm, 1500 mm
Double Spindle 5-Axis/7-Axis CNC Double Spindle Turning and Milling Center Okuma Multus U3000 1SW 1500 Year of construction 2021 OSP P300SA IGF-D CNC Controller Circumferential diameter over carriage 650 mm Turning diameter max. 1,500 mm Main spindle: Spindle bore 91 mm Spindle drive power 15/22 kW Spindle speeds max. 4,200 rpm. Chuck diameter 250 mm C-axis 0.0001° Sub-spindle: Spindle bore 91 mm Spindle drive power 15/22 kW Spindle speeds max. 4,200 rpm. Chuck diameter 250 mm C-axis 0.0001° Tool support: Single tool carrier in the work area Tools for turning (L) and milling (M) CAPTO C6 Tool Holder Milling spindle drive power 19/25 kW Milling spindle speeds 50 – 12,000 rpm. Tool magazine and automatic tool changer 80 tool magazine positions Axes/travels: Flat path X 645 mm Perpendicular travel (off-center) 250 mm Longitudinal travel Z 1,600 m ...
CNC milling and turning center Machine type: DMG Mori CLX 450 TC with Robo2go Control: Siemens 840 D sl Operate Slimline Year of manufacture: 2023 TECHNICAL DATA: Max. turning length: [mm] 1,100 Turning diameter: [mm] 400 Main spindle ISM 65 Speed range: [1/min.] 5,000 Drive power: [kW] 14 / 17 Torque: [Nm] 275 / 345 Spindle Nose: A2-8 Bar Passage: [mm] 67 C-axis CNC spindle swivel for milling and milling Filming Max. speed: [1/min.] 12,000 Drive power: [kW] 8.8 / 10.5 Torque: [Nm] 73 / 90 Tool holder: HSK 63 Tool positions: 30 Sub-spindle ISM 65 Spindle Nose: A2-8 Max. speed: [1/min.] 5,000 Drive power: [kW] 14 / 17 Torque: [Nm] 275 / 345 C-axis X-axis: [mm] 750 EUR 395,000 Y-axis: [+/- mm] 100 Z-axis: [mm] 1,100 B-axis +/- 120 mm Features: Chip conveyor Direct Path Measurement System Chip rinsing gun 3-jaw chuck [mm] SMW-Autoblok BBD 250/78 3-ja ...
Inv. Num. : 9065 Type: GLS 200 Producer: GOODWAY Created: 2016 Parameters: Control System: FANUC Series Oi-TF Switch-on hours: 15380 h Hours: 7757 h Max. turning length: 300 mm Grinding diameter: 350 mm Maximum turning diameter over bed: 500 mm Maximum turning diameter over support: 380 mm Maximum spindle speed: 4500 1/min Spindle passage: 65 mm Number of tool head positions: 12 Weight: 3200 kg Equipment: Chuck Tool probe Bar Feeder Grips
Key data: 2020 mm, 1600 mm, 350000 mm
Stock number: 4023 LATHE Manufacturer: SKODA, Type: SUT 200 TD x 35000 Machines NO.: ob22780, Year of manufacture: 1984 Specifications: Turning length 35000 mm Turning over transverse slides 1600 mm Ø Gr. turning diameter 2020 mm Max. weight in quill 63000 Kg Spindle Motors Power 2 x 82 kW Total power 2x150 kw kW Accessories: Querschlitte 2 x ( Double ) Universal chuck 2 x 2000 mm mm Ø Rotating bezel 6 Fixed bezel 5 + 2 mm Ø Tailstock 2 x Machine needs be to rebuild - with new control Length: 45,200 mm, Height: 3000, Width: 3500 mm, Weight: 150,000 kg
General: Max. workpiece diameter: 140 mm Chuck diameter: 250 mm Max. turning length: 700 mm Gauge I: Tool carrier I: Tool turret (X/Z) Tool drive: 9,600 rpm, 44 Nm Tool holder: BMT Number of stations: 11 + 1 part gripper X-axis: 310 mm Z-axis: 1,115 mm Displacement measuring systems (X/Z): Direct (glass scales) Sub-spindle (OP20): motor spindle Speed: 5,000 rpm Power: 33.9 kW Torque: 231 Nm Lining: 2+2 jaw power chuck Clamping Cylinder: Full Clamping Cylinder, Hydraulic C-axis: 0.01° Gauge III: Tool carrier II: Tool turret (X/Y/Z) Tool drive: 9,600 rpm, 44 Nm Tool holder: BMT Number of stations: 11 + 1 part gripper X-axis: 620 mm Y-axis: 50 mm (+ 22/ - 28 mm) Z-axis: 1,115 mm Displacement measuring systems (X/Z): Direct (glass scales) Gauge IV: Main spindle (OP30): Movable motor spindle Speed: 5,000 rpm Power: 33.9 kW Torque: 231 Nm Lining: Co ...
Key data: 500 mm, 1000 mm
Circumferential diameter over bed 500 mm, over support 290 mm Center width 1000 mm Speed range 1-3000 1/min, spindle nose bayonet Gr 8 Spindle bore 70 mm Tailstock quill MK 5 / stroke 160 mm incl. Control MTC K, Face Plate Fixed bezel with rolling heads Steel holder head system Multifix C with 1 cassette Coolant Setup
Key data: 330 mm, 850 mm, 190 mm
Circumferential diameter over bed / support 330 / 190 mm Center width 850 mm Bore 36 mm Speed range 60 - 2400 1/min Tailstock quill MK 3 / stroke 100 mm incl. accessories: 4-fold holder, chip back panel, T-slots in cross support Tightening tube for collets (New machine was designed according to DIN 8605)
Key data: 840 mm, 3000 mm, 490 mm
Circumferential. over bed 840 mm, over cross slide 490 mm Center width 3000 mm Speed range 10-1250 rpm, spindle nose DIN 55022 Gr. 11 Spindle bore 105 mm Feeds 0.060 - 1.4 mm // 0.024 - 0.518 mm Thread metric 1 - 224 mm Drive power 18.5 kW Quill path / cone 220 mm / MK 6 incl. Hardened and ground bed guides, electromagnetic brake of the main spindle mechanically driven upper support, rapid traverse longitudinal/transverse Multifix steel holder, fixed bezel 2-axis digital display,
- stationary magnetic particle crack detector- deutroflux uws 2500 for longworkpieces- movable carriage for lengte adjustment- 2 phase shifted AC currents generate magnetic field thus, cracks in every direction are detected- skin effect of AC uniform magnetization and demagnezation even in complicaties workpiece geometrie like cranckshaft- new price EUR 250.000
CONTROLS CNC controls FANUC BASIC FUNCTIONS number of spindles: 1 number of turrets: 1 MAIN SPINDLE spindle revolutions (max): 6000 /minELECTRICAL SPECIFICATIONS total power consumption: 36 kW mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space requirements -left/right-: 4200 mm space requirements -front/back-: 2300 mm total height: 3200 mm total weight approx.: 7500 kg
turning diameter over bed: 1420 mmturning diameter over slide rest: 1000 mmturning length: 15000 mmturning dia. in gap: 2050 mmspindle diameter: 160 mmspeed: 1 - 400 U/minfaceplate diameter: mmspindle motor: 30 kWtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - m- 4-jaw face plate- 4 Steady rest- 4-way toolpost- Rapid traverse- tailstock- Taper turning attachmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
