Manufacturer:
(Category: 102)
Working space: Max. swing diameter: 525 mm Max. turning diameter: 300 mm Max. turning length: 497 mm Bar work up to a diameter of max. 65 mm Main spindle: Speed range: 35 – 4,000 rpm Main drive power: 18.5 KW Constant torque: 350 Nm Spindle nose: A2 – 8 inches Spindle bore: 76 mm Spindle positioning c – axis: 0° - 360°/0.001° Tool turret: Number of tool positions: 12 (can be equipped with fixed and driven tools as required) Turret switching time: - 1st station: approx. 0.2 s Powered tools: Drive power: 3.7 KW Max. torque: 35 Nm Speed range: 25 – 4,500 rpm Travels: Turret travel: x – Axle: 180 mm z – axis: 575 mm y – axis: 100 mm (+- 50 mm) Travel speed: Rapid traverse: x – axis: 30 m/min z – axis: 12 m/min c – axis: 400 rpm Feed range: x/y/z – axis: 0 – 5,000 mm/min c – axis: 1° - 2,000°/min Tailstock: Quill stroke: 150 mm Recording: MK 5 Tailstock trav ...
Technical data Manufacturer: Colchester Model: MASCOT (Electronic Mascot) Machine Type: CNC Lathe Control: GE Fanuc Series 20-T Spindle speed: approx. 20 – 1600 rpm Spindle bore: approx. 74 – 76 mm Turning diameter over bed: approx. 430 mm Turning diameter over slide: approx. 260 – 270 mm Center width: approx. 1200 – 2500 mm Spindle motor power: up to approx. 11 kW Weight: approx. 2.2 – 3.0 t Configuration CNC control Fanuc 20-T Tool holder / turret (typical) Tailstock available Coolant Setup Closed machine enclosure Note The technical data was researched on the basis of publicly available information on the Colchester Mascot series. Original machine documentation was not available. Deviations are possible. Auction-ID: A7-47277-31
Serial number CK08004 CNC control, brand, type SIEMENS SINUMERIK Machine weight 5000kg Dimension L 4100mm Dimension w 1800mm Dimension h 2300mm Auction-ID: A7-47277-160
CNC Mitsubishi Mieldas 635 LC Axis travel X1 axis 108 mm Y1 axis 275 mm Z1 axis 325 mm X2 axis 228 mm Z2 axis 130 mm Z3 axis 410 mm Max machining diameter Ø 32 mm (from Ø 10 mm) Max machining length 320 mm for chuck Max front hole diameter Ø 12 mm Max front tapping diameter M 10 (male) - M 8 (dies) Spindle through-hole diameter Ø36 mm Main spindle speed from 200 to 8,000 min ̄¹ Main Spindle Speed Change Stepless - S + 4-digit numeric value Tool holder spindle Max tapping diameter Ø 7 mm Spindle speed M 6 Spindle speed change from 200 to 5,000 min ̄¹ - Continuous - S + 4-digit numerical value IEMCA BOSS 332-E BAR CONVEYOR AND BAR LOADER INCLUDED Machinery equipped with manuals and EC declaration of conformity. Well used, seen and liked in the state of fact and law in which it finds itself. All technical data shown are indicative and may be changed without notice and therefore s ...
Technical data Manufacturer: FMS Drehtechnik Schaffhausen AG, Switzerland Type: NDL-40/130 Machine Type: CNC Lathe Year of Make: 2003 Control: Siemens SINUMERIK Machine No.: 16212-51 Turning length: 1500 mm Turning diameter: 400 mm Swing diameter over bed: 630 mm Swing diameter over face slide: 410 mm Speed range: 40 – 3200 rpm Main drive: 68 kW Spindle bore: 90 mm Hydr. Clamping Cylinder Passage: 86 mm Tailstock: MK5, quill stroke 120 mm Rapid traverse: 16,000 mm/min Coolant tank: 400 l Dimensions (L x W x H): approx. 5350 x 2270 x 2670 mm Machine weight: approx. 14,000 kg Configuration Siemens SINUMERIK CNC control Heidenhain Digital Display Hydraulic clamping system Tool turret Coolant system Chip conveyor Hydraulic power unit Various clamping devices and tool holders Extensive technical documentation available Machine dismantled in the production environment Auction-ID: A7-46939-8 ...
Technical data MEUSER M1 S Lead and Pull Spindle Lathe Year of Make: 1970 Speed range: 20 – 1000 rpm 4-jaw chuck approx. 400 mm Conventional lathe Configuration Tailstock available Bezel available Face Plate / Drive Plate Quick-change steel holder and tool holder Various turning tools and clamping devices Coolant system available Accessories and tool holders according to photo documentation Condition according to photo documentation Auction-ID: A7-46939-104
Model: Mori Seiki MT 1500 S (Sub-spindle version) Type: 5-axis multitasking turning/milling center Maximum rotating diameter on the bench: 750 mm Maximum turning diameter: 540 mm Maximum turning length: 800 - 1,000 mm (depending on version) Usable bar passage (main spindle): 65 mm (ASA 6\" standard) Useful bar passage (counter spindle): 52 mm Main Spindle and Sub-Spindle Maximum main spindle speed: 4,500 rpm (revolutions per minute) Main spindle motor power: 22 kW / 18.5 kW (30 min/cont.) Maximum counter spindle speed: 6,000 rpm Counter spindle motor power: 11 kW / 7.5 kW C-axis resolution (both spindles): 0.001 degrees (continuous positioning) Milling Head (B-Axis) and Linear Axes X-axis travel (upper head): 565 mm Y-axis travel (top head): 160 mm (± 80 mm from center) Z-axis travel (upper head): 800 - 1,050 mm B-axis travel (head tilt): ± 120 degrees (total field 240 ...
Spindle diameter 255 mm SMW autoblok 250 BB 12-place motorized turret tailstock and bezel Auction-ID: A7-47195-38
Motorized turret, self-centering collet holder, tailstock, manuals present Auction-ID: A7-47195-32
Top High-Performance Magic Bar Loader Automations Technical features: Bar Diameter Capacity: from 8 mm to 100 mm (depending on the specific version of the cylinder head) Bar length about 1500 Driving System: Self-adjusting half-shell channel (managed by servomotor) Diameter Change: Fully automatic in less than 60 seconds via CNC keypad Bar retraction: Managed by bar feeder with integrated lubrication system Feed Speed: Up to 600 mm/sec (adjustable) Compatibility: Interfaceable with any CNC lathe (Fanuc, Mitsubishi, Siemens) Total dimensions: 1,700 x 1,100 mm Spindle Line Height: Adjustable (usually 900 - 1,250 mm) Approximate weight: 1,800 kg Auction-ID: A7-47195-29
Driven tools included Bar feeder included Video available! Machine won't start up correctly. Auction-ID: A1-40976-48
Includes: brake drum with integrated clutch with 6 pins Auction-ID: A1-41277-221
Mori Seiki CL 253 B CNC Lathe - Monitor defective • Maximum turning diameter: 260 mm • Maximum turning length: 1035 mm • Spindle nose/bore: JIS A2-8 / 86 mm • Rod capacity: 74 mm Lrsbknjy D Rnyo Aurwel • Rapid traverse (X/Z): 18 / 24 m/min • Tool feed (BMC): 3,000 rpm / 6.5 kW • Tailstock: MT 5, 150 mm stroke • Control: MSG-501 MAPPS (Fanuc) • Turret: 12 stations VDI 40 Auction-ID: A7-47048-8
H. Ernault Somua Cholet 435 workshop lathe, a robust machine known for its reliability in machining. Equipped with many tool holders and accessories visible in the photos. Set in perfect working order. Ideal machine for turning, threading and general machining work in the workshop. Normal traces of use and age visible on the paintwork, without affecting use. Auction-ID: A3-43538-36053
FAT TUR 630 MN x 2000 mm – Siemens 840D ShopTurn – SCHUNK ROTA-S 315 mm chuck – Fixed bezel 140–300 mm – Full backup Robust and precise CNC lathe, ideal for machining single or small series parts. Highly intuitive Siemens 840D ShopTurn control, fast programming. Machine equipped with SCHUNK ROTA-S Ø315 mm chuck, 140–300 mm fixed bezel and full NC backup. Machine in excellent working order, ready to produce. Siemens 840D Full Backup - Machine Documentation + NC Jaw Sets - Wrenches, Service Tools Possibility to add additional glasses or tools Numerical control Siemens 840D sl (ShopTurn version) ShopTurn Conversational Programming - Dynamic Error-Free Graphics - Simple Tool Management Multiple languages available (FR / EN / DE / PL / etc.) Memory card / Full backup available General features: FAT / HACO TUR CNC Tower 630 MN Permissible diameter above the straggler: ~370 mm ( ...
CENTRE LATHE KNUTH DL 550 / 1500 B with big whirling machine Swing over bed dia. 1100 mm Swing over cross slide dia. 1590 mm Swing in the gap dia. 1270 mm Spindle bore 105 mm Bed width 550 mm Length x width x height: 3510 x 1590 x 1760 mm Weight: 5250 kg Auction-ID: A7-47067-4
Technical details Type: CNC turning center / CNC lathe Power supply: 400 V / 3 phases Installed power: 20 kVA Maximum turning diameter: 210 mm Maximum turning length: 460 mm Bar capacity: 42 mm Spindle speed: Up to 6000 rpm Hydraulic chuck: 6” / 3 jaws X-axis travel: 215 mm Z-axis travel: 520 mm Rapid traverse speed X/Z: 30 m/min Main motor power: 11 / 15 kW Bed configuration: 30° inclined heavy-duty bed Equipment: - Automatic turret - Manual pulse generator - Hydraulic chuck - Adjustable hydraulic quill - Automatic lubrication system - Cooling system Application: Precision CNC turning and bar machining operations Condition: Used Auction-ID: A7-40834-7
Mori Seiki CL 153 CNC Lathe Turning diameter over bed: 515 mm Maximum turning diameter: 400 mm Maximum turning length: 303 mm Rapid traverse X-axis: 2010 m/min Rapid traverse Z-axis: 2400 m/min Spindle holder: A2-5 Spindle bore: 67 mm Through-hole spindle: 43 mm Maximum rod diameter: 33 mm Spindle speeds: 60–6000 rpm X-axis travel: 235 mm Travel Z-axis: 310 mm Spindle drive motor: 10 hp 12-speed revolver Electrical connections: 220 V, 60 Hz Auction-ID: A7-47048-23
Turning diameter max. 390 mm Turning length max. 572 mm Control MSD 501 Circumferential diameter over bed 700 mm Circumferential diameter over face slide 560 mm Distance between tips 725 mm Standard turning diameter 248 mm max. turning diameter 1: 390 / 2: 260 mm Main spindle: Speed range - main spindle 35 - 3,500 min/-1 Drive power - main spindle 18.5 / 15 kW Spindle nose JIS A2-8 Spindle bearing diameter 130 mm Spindle bore 86 mm Usable rod diameter 62 mm Travels: x-axis 1: 238 / 2: 173 mm z-axis 1: 650 / 2: 650 mm Tool turret: Number of turrets 2 Number of tool positions 10 + 8 pos. Number of driven tool stations - pos. Switching time 0.3 sec Shaft diameter 25 mm Shank diameter of the drills max. 50 mm Tailstock: Tailstock travel 500 mm Quill diameter 110 mm Tailstock mount MK 5 Quill stroke 150 mm Feeds: Rapid traverse X1/2: 18 m/min Rapid traverse Z1/2: 24 m/min Feed ...
Description of the machine: This machine is suitable for turning chuck and shaft workpieces. The commercial steel grades, cast iron, copper, aluminum, brass, gunmetal and cuttable plastic can be rotated on this machine. --> Concept of the N.E.F. plus The machine comes standard with the equipment described below delivered - Cycle control - AC main drive - Combination carriage with AC drive and control panel - Tailstock movable with tailstock tensioner, manually clamped, with downstream centering tip - Coolant supply - Chip protection hoods, manually operated - Protective cover for chucks - Quick-change tool holder Hahn & Kolb Multifix C - Reducing ring for turning spindle Accessories according to pictures: - 2 pcs bezels - Various clamping jaws - Hahn & Kolb Multifix Type C - Various turning steel holders Technical data: Working Range: - Circumfere ...
Mori Seiki ZL 250-600 CNC Lathe Power of the main spindle 18.5 Kw Passage of the main spindle rod 73 mm Diameter of rotation 250 mm Length of rotation 650 mm Number of revolutions of the main spindle 3500 Number of Tool Turrets 2 Number of first turret tool locations 12 Number of motorized first turrets 12 Travel X-axis first turret 238 mm Travel Z-axis first turret 650 mm Number of second turret tool locations 10 Number of fixed tool positions second turret 10 Travel X-axis second turret 173 mm Z-axis travel second turret 650 mm Tailstock Quill stroke 150 mm Chip conveyor Auction-ID: A7-47048-19
max. turning diameter 356 mm Turning length 510 mm Control M 720 BM MAPPS II Circumferential diameter over bed 923 mm Circumferential diameter over carriage 755 mm Standard turning diameter 275 mm Rod diameter max. 65 mm Main spindle: Spindle nose A2-6 Speed range - spindle max. 5,000 min/-1 Drive power - spindle motor 15 / 11 kW Spindle bearing diameter 120 mm Spindle bore 73 mm max. usable rod diameter 65 mm C-axis 0.001 ° Sub-spindle: Spindle nose A2-5 Speed range - spindle max. 6,000 min/-1 Drive power - spindle motor 11 / 7.5 kW Spindle bearing diameter 85 mm Spindle bore 43 mm max. usable rod diameter ( - ) mm C-axis 0.001 ° Travels: Travel of counter spindle B: 624 mm Travel - x 260 mm Travel - z 590 mm Travel - y 100 (+/-50) mm Tool turret: Turret head (x-fold) 12 powered stations 12 pos Shaft diameter 25 mm Shaft diameter for drill rod max. 50 mm Speed range of the ...
Mori Seiki SL 300 BMC/700 CNC Lathe Max. turning diameter 715 mm X-axis 250 mm Z-axis 800 mm Spindle bore 77 mm Speed 3500 rpm Power spindle 18.5 kW Tool Changer 12 Speed driven tools 4500 rpm Length 3500 mm Width 2200 mm Height 2400 mm Weight 9000 kg Incl. jaw chuck and tool holder in the turret. No other accessories Auction-ID: A7-47048-11
Mori Seiki SL 203 MC, CNC Lathe Year of Make: 2000 Incl. chip conveyor, tailstock Incl. jaw chuck and tool holder in the turret. Auction-ID: A7-47048-9
Cycle lathe Weiler E 50/1 Year of Make: 1997 Technical data Manufacturer: HAMLET Type: E 50 / 1 Year of Make: 1997 Tip height: 280 mm Center width: 1,000 mm Swing diameter: 500 mm Circumferential diameter over bed: 570 mm Circumferential diameter over support: 340 mm Spindle speeds: 0 - 2,500 rpm Lining: available Auction-ID: A1-46872-35
Vertical lathe Gildemeister CTV 250 Technical details Chuck diameter: 250 mm X-axis: 800 mm Z-axis: 300 mm Spindle Spindle head: 170 h5 Spindle diameter in front bearing: 120 mm Spindle bore: 79 mm C-axis Number of workstations: 12 Auction-ID: A1-46872-36
CNC lathe GILDEMEISTER NEF 400 Year of Make: 2005 Control: Siemens 840 D Technical data Turning length: 650 mm Circumferential diameter over bed: 400 mm Circulation diameter over face slide: 270 mm Spindle bore: 65 mm Flat travel (X): 220 mm Longitudinal travel (Z): 700 mm Max. main spindle speed: 4,000 rpm Tool turret: 8-speed Machine weight: approx. 3,175 kg Auction-ID: A1-46872-25
CNC Lathe Technical details CNC control: Fanuc 21 i-T Circumferential diameter: 415 mm Turning length: 600 mm Speeds: up to 4,500 rpm Spindle power: 15 kW Number of turrets: 11-speed Machine Details Weight: 4,000 kg Facilities Ejector Substitute Occupational Benefit Institution Tools Motorized Automatic Tailstock Auction-ID: A1-46872-26
7.000 € 
