Manufacturer:
(Category: 101)
Inv. Num. : 8589 Type: CWK 400D Dynamic Producer: Heckert Created: 2002 Parameters: Control system: Siemens Sinumerik 840D Work table length: 400 mm Work table width: 400 mm Maximum table load (uniform): 400 kg Spindle drive power: 19 kW Number of axes: 4 pieces Tool magazine: 120 pieces Minimum spindle speed: 50 1/min Maximum spindle speed: 15000 1/min X-axis travel: 650 mm Y-axis travel: 650 mm Travel travel Z-axis: 650 mm Cone: HSK A63 Max. tool length: 350 mm Max. tool weight: 10 kg Machine height: 2600 mm Machine length: 8500 mm Machine width: 4500 mm Machine weight: 12000 kg Equipment: 2 pallets 4th axis – rotary table Chip conveyor KNOLL 450 K – 1/250 Emulsion Filtration KNOLL 210/1350 Oil mist extraction
Drilling capacity 32 mm Spindle mount MK 3 Projection 290 mm Pinol stroke 160 mm Table size 510 x 300 mm Column diameter 115 mm Spindle speed 55 - 1450 rpm infinitely variable Motor power 0.9 and 1.3 kW pole-switchable Mains connection 380 volts, 50 Hz. Spindle speed via 2 gear stages, 2 motor speeds and infinitely variable via variator gear Table height adjustment via hand crank Machine Light Keyless chuck 1 to 13 mm Space requirements L x W x H 1200 x 650 x 1900 mm Weight 400 kg
x-travel: 1040 mmy-travel: 600 mmz-travel: 500 mmControl: Heidenhain iTNC 530 table surface area: 1250 x 600 mmtable load: 600 kgtool taper: SK 40 spindle turning speed range: 1 - 8000 U/minmax. torque on the spindle: (S1/S6) 140/200 Nmfeed range: 40000 mm/minrapid power traverse in X-and Z direction: 70 m/minrapid motion - y-axis: 40 m/minspindle drive: (100/40 % ED) 13/19 kWtotal power requirement: 39 kVAweight of the machine ca.: 8,9 tdimensions of the machine ca.: mOperating hours 70278Spindle hours 23335Please note the enclosed geometry measurement report with the tool pull-in force measurement.Equipment:CNC control Heidenhain iTNC 530Electronic handwheel Heidenhain HR 410Motor spindle with increased torqueDirect path measuring system in Y-Z axisPreparation for measuring probe30-station tool changer, tool diameter 100/140 mm, length 300, weight 7 kgROTOCLEARProduction package 2Inte ...
spindle diameter: 125 mmx-travel: 2000 mmy-travel: 1100 mmz-travel: SK 50 mmspindle taper: Philips 2500 digital readout: Pfillips turning speeds: 925 U/minspindle stroke: 800 mmTable: 1000x1400 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - th ...
bore capacity in steel (diameter): 30.0 mmthroat: 293 mmbore stroke: 140 mmmorse taper: 3 MKtable:: 515 x 360 mmturning speeds: 225 - 4300 U/mincolumn diameter: 115 mmdistance spindle /table: 132 / 724 mmengine output: 1.0 / 1.6 kWweight: 260 kgMachine height: 1790 mm NEW ALZMETALL MODEL RANGE 7 TFT - LCD display with touch function: Spindle speed setpoint Actual speed display Integrated drilling depth display with touch zero point transfer Virtual drilling depth scale in the display Machine status displays and warnings in the display Service information Selectable user language: DE / EN / FR / ES / IT / NL / RU.Furnishing:- Infinitely variable speed setting by means of an adjusting lever- Spindle protection with electrical fuse- Three separate buttons for clockwise rotation - counterclockwise rotation - stop- Mushroom pushbutton (latching) for EMERGENCY STOP- Main switch, lockable- Rig ...
Description Machining Center Hurco BMC 30 Details Serial No. B3HM-92206089EB with control Ultimax approx. 45 tool holders Replacement spindle 4382 Hours
x-travel: 760 mmy-travel: 460 mmz-travel: 560 mmControl: Siemens Sinumerik 840D b-axis: NC-Schwenkfräskopf A-axis: NC-Rundachse milling-head swivable +/-: -120 / +30 Tool changer: 60 Cooling through the spindle: IKZ 40 barspindle turning speed range: 12.000 U/minspindle motor: 28/19 kWtool taper: HSK-A 63 max. torque on the spindle: 121 pmtotal power requirement: ca. 60 kVAweight of the machine ca.: 8,5 tdimensions of the machine ca.: - mUniversal bar machining center- Siemens Sinumerik 840 D 3D path control - Powerline ShopMill- Controlled NC swivel milling head (B-axis)- NC rotary axis with integrated clamping system- NC bar loader- Slide/conveyor belt for parts disposal- Coolant tank 600 ltr. with paper belt filter- IKZ 40 bar through spindle center- Rotating viewing window- Tool breakage control- Chip conveyor- Tool magazine - Chain magazine with 60 magazine slots HSK-A 63- Clam ...
x-travel: 1.000 mmy-travel: 1.000 mmz-travel: 1.000 mmControl: SINUMERIK 840D pl spindle turning speed - stepless: U/mintotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m5-axis machining center with SIEMENS SINUMERIK 840D pl control, electron. handwheel, NC swivel rotary table Ø1,000mm, coolant through the spindle, chip conveyor, 180-fold tool-magazine HSK100,The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Control: SIEMENS drilling diameter: Ø 3 - 25 (18) mmturning speeds: 1000 - 6100 U/minbore slide stroke: 850 mmbore depth: 550 mmspindle distance: 240 mmdimensions: ca. 6 5 2,3 mShipping weight: ca. 6000 kg: Packing: ca. 10 Lademeter mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inv. Num. : 8573 Type: VC 1810 Producer: TRIMILL Created: 2015 Parameters: Control system: Heidenhain iTNC 530 HSCI Work table length: 2000 mm Work table width: 1370 mm Maximum table load (uniform): 10000 kg Spindle drive power: 25 kW Maximum vertical spindle speed: 14000 1/min X-axis travel: 1800 mm Y-axis travel: 1000 mm Travel Z axis: 700 mm Maximum feed speed axis X: 30000 mm/min Maximum feed speed axis Y: 30000 mm/min Maximum feed speed axis Z: 30000 mm/min Cone: HSK – A80 Number of all tools: 10 pieces Maximum tool diameter: 110/125 mm Max. tool weight: 12 kg Machine weight: 18000 kg Equipment: Tools Thermal clamps
bore capacity in steel (diameter): mmthroat: 290 mmbore stroke: 180 mmtotal power requirement: 1,9 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inv. Num. : 8553 Type: VOC 1000 Producer: INTOS Created: 2003 Parameters: Control system: Siemens 810D Work table length: 1100 mm Work table width: 500 mm Maximum spindle speed: 8000 1/min Number of axes: 3 X-axis travel: 1000 mm Y-axis travel: 500 mm Travel Z axis: 500 mm Machine weight: 4500 kg
Inv. Num. : 8551 Type: M 1200 Producer: Microcut Created: 2018 Parameters: Control system: Siemens Sinumeric 828D SW4 Work table length: 1400 mm Work table width: 710 mm Maximum table load (even): 1000 kg X-axis travel: 1200 mm Y-axis travel: 730 mm Travel travel Z-axis: 650 mm Number of axles: 30 pieces Machine weight: 10500 kg
Inv. Num. : 8550 Type: VF-3 Producer: HAAS Created: 2017 Parameters: Control system: HAAS Work table length: 1219 mm Work table width: 457 mm Maximum table load (uniform): 1588 kg Spindle drive power: 22.4 kW Speed: 8100 1/min X-axis travel: 1016 mm Y-axis travel: 508 mm Z-axis travel: 635 mm Cone: BT 40 Machine weight: 5316 kg
Travel X/Y/Z: 1000mm/600mm/600mm, feed rate: 30m/min, rapid traverse: 30m/min, table dimensions X/Y: approx. 1200mm/600mm, max. table load: 800kg, tool stations: 24, tool holder: SK40, speed: 8000rpm. Machine dimensions X/Y/Z: approx. 3000mm/3500mm/3000mm, weight: approx. 5000kg, operating hours: approx. 10346h, spindle hours: approx. 10346h. Includes a compact filtration system Interlit SUK 200/550, year of manufacture: 2000. The machine is equipped with a new control system. Documentation available. An on-site inspection is possible.
Inv. Num. : 8548 Type: XV 1000 Producer: Hardinge Bridgeport Created: 2007 Parameters: Control system: Siemens 810DE Work table length: 1100 mm Work table width: 500 mm Tool magazine: 20 pieces Maximum spindle speed: 8000 1/min Number of axes: 3 X-axis travel: 1020 mm Y-axis travel: 610 mm Travel Z-axis: 560 mm Machine weight: 6000 kg
5-Axis Vertical Machining Center DMG DMC 75V LINEAR Linear Motors The machine can be viewed in working order in our warehouse in Gussago, Brescia. Mimu Machine Tools Gussago BS Italy Dmg DMC 75 Linear Heidenhain CNC iTNC 530 Tool holder HSK 63 Spindle power 35 kW Spindle speed 18,000 rpm Number of tools 60 X-axis travel 885 mm Y-axis travel 600 mm Z-axis travel 600 mm Rapid feeds X-Y-Z linear axes 90 m/min Roller guides Fourth-axis head yes Fourth-axis head type continuous Fourth-axis head degrees -10° + 110° Rotary table yes Rotary table type continuous Table size 750 mm MACHINE EQUIPMENT Precision package with optical scales on the axes New spindle line The machining center is a machine tool equipped with a numerical control capable of performing multiple mechanical operations with a single setup on Multiple surfaces of the same workpiece. It is generally equipped with multiple m ...
bore capacity in steel (diameter): 60 mmCenter of spindle to wall or column: min./max. 320 - 160 mmspindle turning speed range: 20 - 2.500 U/minquill stroke: 310 mmtotal power requirement: 4 kWweight of the machine ca.: 4.500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
3-axis machining centre with automatic 8-fold tool changer for aluminium or PVC profiles Max. travel X-axis: 4200 mm Max. travel Y-axis: 480 mm Max. travel Z-axis: 325 mm Control system E 500 Speed infinitely variable up to 6,000 rpm Hand-held control unit Minimum quantity spraying Double-sided angle head and a high-speed spindle Tensioner detection 8 pneumatic material tensioners Light barrier
x-travel: 1800 mmy-travel: 700 mmz-travel: 700 mmcontrol: Heidenhain iTNC 530 table surface area: 2100 x 700 mmtable load: 1500 kgturning speeds: 20 - 18000 U/mintaper ISO: SK 40 spindle motor: 35 / 25 kWrapid traverse: 40 m/mintool change unit: 60 -fachdimensions of the machine ca.: 5,5 x 3,5 x 2,7 mtotal power requirement: kWweight of the machine ca.: 14 t- Control Heidenhain iTNC 530- 5-axis- Fixed table with integrated rotary table dia. 750mm (500kg)- IKZ 40 bar- Tool changer 60-fold (SK 40)- Milling head with B-axis- Chip conveyor- Spray gun- 3d Quick Set- BLUM laser measuring system- Direct distance measuring system- 2 Rotary Clean Windows-The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 600 mmy-travel: 580 mmz-travel: 580 mmcontrol: SEICOS 16M B-axis (table): 360 x 1° mmfeed X/Y/Z/-axis: 1 - 50.000 mm/minrapid traverse X/Y/Z: 50,00 m/minturning speed range - stepless: 35 - 12.000 Nmspindle drive: 22,00 kWmax. torque on the spindle: 236 tool taper: BT40 toolpiece magazine: chain magazine: 61 Stücksize of pallet: 2x 400x400 mmmax. workpiece diameter: 630 mmworkpiece height max.: 680 mmworkpiece weight max.: 400 kgtotal power requirement: 30,00 kWweight of the machine ca.: 12,00 tdimensions of the machine ca.: 4,00 x 3,50 x H3,00 mWith SEICOS S16M control unit, coolant system, chip conveyor, electron. handwheel, dust exhauster.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Deckel Maho DMC63V BJ 2009 ( incl. new milling spindle + Y-spindle ) Heidenhain Control
Mitsubishi MAF 210/150A Year: 1977 Table Size: 3000 × 3000 mm | Load Capacity: 60,000 kg Axis Travel: X: 14,000 mm | Y: 4500 mm | Z: 900 mm Spindle: Ø164 mm | 4–3460 rpm | 37/45 kW DC motor Control: ISO/EIA compatible | 5-axis interpolation | M-NUX115 DRO Accuracy: ±0.015 mm/m (X/Y), Repeatability ±0.01 mm Included Accessories: • Tool locking (5 pull studs) • Digital readout system • NC controller with startup components • Setup/leveling blocks • Maintenance toolkit • Protective covers Optional Add-ons (upon request): • Chip conveyor and coolant system • Rotary/angled fixturing • Pendant control • Bellows or floor plate systems • Special tooling packages Utilities & Installation: • Power: AC 220V (standard) • Air: 2–7 kg/cm² at 100 L/min • Installation space & foundation info on request
4-axis CNC horizontal milling machine Hüller Hille BlueStar5 built in 2007 automatic pallet changer with 2 interchangeable pallets with 4 vices each (125), 4 additional interchangeable pallets (one with mineral casting clamping tower), Renishaw measuring system, high-pressure coolant system with additional filter device, coolant and air through the spindle, 40-fold tool magazine BT40, Operating hours and control see photo
Specifications: Manufacturer: 3M ESPE Type: Lava CNC 500 Control: Beckhoff Year of Make: 2008 Compressed air: 6.5 bar Rated power: 1 kW Rated mains frequency: 50/60 Hz Weight Weight: 620 kg Condition Condition: Used Functional: Tested and fully functional
