Manufacturer:
(Category: 105)
Max. saw blade diameter: 350 mm Pneumatic material tensioners Micro spraying device Material feed via 2-hand operation Saw table can be rotated in both directions Length stop and roller conveyor on request
Max. saw blade diameter: 530 mm Cutting capacity 90° Round 180mm, Square 170mm, Rectangle 380x70m Cutting capacity 45° left Round 180mm, square 150mm; Rectangle 290x70mm Cutting capacity 45° right Round 180mm, square 150mm; Rectangle 290x70mm Digital degree display for the saw table Turning range of the saw table 180° Spraying device 2-hand operation
cutting diameter: 360 mmsaw band length: 0 mmcutting width: 0 mmcutting speed: 0 m/mintotal power requirement: 1,0 kWweight of the machine ca.: 0,6 tdimensions of the machine ca.: 2,2 x 2,05 x 1,5 mHorizontal Bandsaw- Max. Miter Angle: 45°- Coolant System- Emergency Stop- 1300 mm Infeed Roller Conveyor- 2 Spare Saw BladesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
-Striebig -Standard II TRK, 5220 A -Year: 1998 -No.: 28351 -was acquired refurbished! Shipping available on request. Sale only to tradespeople. Stated purchase price = Net plus 19% VAT = €13,708.80 Gross
Offered is an aluminum miter circular saw. Saw blade diameter: 550mm, power: 4000W, speed: 2800rpm, control: manual with digital display for cutting angle. Equipped with extraction hose, noise protection enclosure. Weight: approx. 750kg, overall dimensions X/Y/Z: approx. 1400mm/1500mm/1900mm. Inspection possible by arrangement.
Saw blade Ø: 350 mm thereby cutting area Round: 120 mm Square: 100 x 100 mm Rectangle: 170 x 100 mm 2 saw blade speeds: 34/68 rpm Drive motor: 380 V, 2/2.6 kW Weight approx.: 300 kg Approx. space requirement: 800 x 700 x 1770 mm
MEP Shark 282 CCS Band Saw 3-speed 400V, 2-stage motor, runs smoothly. Infinitely variable speed from 0 to 72 RPM. Miter cuts possible from -45 to +60 degrees. CCS (Cut Control System) hydraulic lowering aid. Saw blade pressure gauge. Year of manufacture: 2005 Made in Italy. Maximum cutting capacity round: 250 mm Maximum cutting capacity square: 220 mm Maximum clamping opening: 285 mm Saw blade dimensions: 2950 x 27 x 0.9 mm Coolant pump with filter in the base cabinet. Machine dimensions: 125 x 70 x 190 cm Infeed conveyor dimensions: 200 x 53 x 90 cm Includes accessories as shown in the pictures.
Key data: 500 mm
Max. saw blade diameter: 500 mm Automatic positioning of length and angle (90° or 45°), intermediate mitres adjustable from the front Moving roller conveyor Material support pneumatically folds up Minimum quantity spraying device USB Port Instruction manual Weight: 1400 kg
A fully automatic band saw is offered. Band length: 4240mm, saw band dimensions X/Y/Z: 4240mm/34mm/1.1mm, cutting capacity: approx. 320mm, square cutting capacity X/Y: 320mm/320mm, cutting speed: 15m/min - 100m/min. Equipped with CNC control, fully automatic material feed, hydraulic saw band tensioning, integrated coolant system, chip conveyor, bundle clamping device. Machine weight: approx. 1650kg, machine dimensions X/Y/Z: approx. 2250mm/2100mm/1500mm. Inspection possible by arrangement.
A longitudinal circular splitting saw is offered. Saw blade Ø: 400mm, cutting length: 400mm, cutting depth: 130mm, integrated coolant system, swiveling saw head for miter cuts, manual feed, base cabinet. Inspection possible by arrangement.
Year: 2009 - technically efficient, ready to work – after full service - disc diameter: 400 mm - bottom cutting - cooling and lubrication system - vertical pneumatic clamps - protective cover - compressed air preparation station
380 V 1.5 KW Length 0.6 m Width 0.5 m Height 1.40 m Color: Gray Weight 98 kg Unaudited Hobbyist object
Holder Metabo for Flex 230 mm Length 0.5m Width 0.5 m Height 1.30 m
Support stand, assembly stand, steel stand, welding table, assembly table, work stand, heavy-duty support stand, mobile stand, support stand, trestle stand, support stands -Auxiliary stand: Steel stand with spring-loaded chassis -Height: 1910 mm -Load capacity: 15 tons distributed load -Number: 2 axle stands available -Price: for 2 pieces -Dimensions: 1310/1915/H1910 mm/piece -Weight: 263 kg/piece
saw blade diameter: 300 mmcutting diameter: 100 mmsaw blade turning speeds: 40 / 80 U/mincapacity 90 degrees: square: 90 mmcapacity 90 degrees: round: 100 mmtotal power requirement: 1,5 kWweight of the machine ca.: 0,5 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 200 mmband length: 350 mmcapacity 90 degrees: round: 200 mmtotal power requirement: 3,0 kWweight of the machine ca.: 0,45 tdimensions: 1,4 x 1,4 x 1,3 mAutomatic hacksaw- with 1000 mm infeed roller conveyor- preset counter- material stop with trigger, max. 600 mm- coolant systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 400 mmcapacity 90 degrees: round: 130 mmcapacity 90 degrees: square: 110 mmcapacity 90 degrees: flat: 180 x 100 mmsaw blade turning speeds: 3000 U/mintotal power requirement: 2,2 kWweight of the machine ca.: 0,51 tdimensions: 3,8 x 1,6 x 1,7 mAutomatic Aluminum Circular Saw- Outfeed roller conveyor (4000 mm) with handwheel, flip-up stop, and digital system- Infeed roller conveyor (3500 mm)- Transport dimensions 6.0m x 2.0m x 1.6mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 230 mmcutting speed: 35 - 70 m/mincutting width: 260 x 200 mm: mmsaw band length: 2720 x 27 x 0,9 mmtotal power requirement: 1,1 kWweight of the machine ca.: 0,68 tdimensions of the machine ca.: 1,8 x 1,8 x 1,6 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A fully automatic high-speed tube circular saw Bewo is available. Round tube diameter range: 8mm-90mm, min. square profile dimensions X/Y: 10mm/10mm, max. square profile dimensions X/Y: 80mm/80mm, feed rate: 50m/min-300m/min, saw blade diameter: 350mm, max. throughput capacity: 8000pieces/h, max. simultaneous machining: 4 tubes. Documentation available. An on-site inspection is possible.
Offer 26003 Technical data: - Saw blade diameter up to 370 mm - Cutting range at 90° around 110 mm - Square 100 mm - Rectangle 280 x 40 mm - or 240 x 85 mm - at 45° around 110 mm - Square 100 mm - Rectangle 220 x 40 mm - Mitre adjustable Li + Re each 0 - 90 ° - 2 cutting speeds 13 + 26 m/min - Drive 380 V / 1.2 / 1.8 kW - Feed speed of the saw blade hydr. Infinitely variable - Coolant device - Space requirement approx. W 800 x H 1850 x D 1100 mm - Weight approx. 750 kg
Support stand, assembly stand, steel stand, welding table, assembly table, work stand, heavy-duty support stand, mobile stand, support stand, trestle, support stands -Auxiliary stand: Steel stand with spring-loaded chassis -Height: 430 mm -Load capacity: 15 tons distributed load -Number: 14 axle stands available -Price: per piece -Dimensions: 410/1200/H430 mm -Weight: 60 kg
Key data: 270 mm
16 A plug Saw blade housing right. side replaced by steel plate. Length 0.8 m Width 0.65 m Height 1.40 m Weight 200 kg
Schnittgeschw. 12 - 750m/min 16 A plug Top towing eye Ideal Strip Welding Device Work Lamp Chip blow-off device Length 1 m Width 0.8 m Height 1.90 m
Cutting speed 12 - 75 m/min Belt Welding Device 16 A plug Length 0.80 m Width 0.70 m Height 1.60 m Weight 250 kg Work Lamp Tools Saw blade 0.65 mm teeth a/1"
Key data: 500 mm
Schnittgeschw. 20 - 70 m/min 16 A plug Length 1.85 m Width 0.80 m Height 1.20 m Weight 300 kg Coolant Unit Belt Gears 1 saw blade new Rollable
CONTROLS PLC TECHNICAL SPECIFICATION max. cutting height: 360 mm sawband length: 5334 mm sawband width: 41 mm max. bar feed (single stroke): 600 mm cutting speed min.: 14 m/min cutting speed max.: 102 m/min power of band drive: 5.5 kWELECTRICAL SPECIFICATIONS total power consumption: 10 kWDIMENSIONS / WEIGHTS space requirements -left/right-: 2840 mm space requirements -front/back-: 2800 mm total height: 2130 mm total weight approx.: 2540 kg
TECHNICAL SPECIFICATION max. cutting height: 150 mm sawband length: 3660 mm
saw blade diameter: 450 mmcutting diameter: 150 mmcutting lenght max.: 1000 mmweight of the machine ca.: 1.35 tdimensions of the machine ca.: 2.7 x 1.5 x 1.65 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Offer 24477 Technical data: - Cutting range at 90° around 220 mm - flat 250 x 100 mm - Square 170 x 170 mm - Cutting range 45° around 150 mm - flat 150 x 150 mm - Mitre adjustment left + right - Saw blade dimensions 2890 x 27 x 0.9 mm - Cutting speeds 40 + 60 m/min - Hydr. lowering the saw frame - Cutting pressure infinitely adjustable 0 - 10 m/min - Total drive power 400 V / 1.5 kW - Space requirement approx. W 1500 x H 1000 x D 650 mm - Weight approx. 250 kg
Offer 24477 Technical data: - Cutting range at 90° around 220 mm - flat 250 x 100 mm - Square 170 x 170 mm - Cutting range 45° around 150 mm - flat 150 x 150 mm - Mitre adjustment left + right - Saw blade dimensions 2890 x 27 x 0.9 mm - Cutting speeds 40 + 60 m/min - Hydr. lowering the saw frame - Cutting pressure infinitely adjustable 0 - 10 m/min - Total drive power 400 V / 1.5 kW - Space requirement approx. W 1500 x H 1000 x D 650 mm - Weight approx. 250 kg
