Manufacturer:
(Category: 105)
Key data: 430 mm
Fully automatic band saw machine Manufacturer : Kasto Type: Twin A4 Bauahr: 2010 Condition: gebraucht / used Location : Warehouse Sweden Technical data Cutting range: Cutting range around 430 mm Cutting area square H x W 430 x 430 mm Cutting area flat H x W 430 x 430 mm Clamping range 0 – 430 mm Smallest dimension to be sawn: 10 x 10 mm Smallest section length 6 mm Shortest residual piece length in automatic mode (only possible for geometrically flawless surfaces) 35 mm Shortest offcut length in single cut 10 mm Dimensions and weights: Length approx. 2,140 mm Width incl. chip conveyor 4,610 mm Height (saw frame lowered) approx. 2,195 mm Height (saw frame in maximum position) approx. 2,410 mm Material support height 700 mm Coolant: Coolant tank volume 150 l, Pump capacity at 3 m head 25 l/min Paintwork: Machine light grey RAL 7035 textured paint Saw ...
cutting diameter: max. 225 mmsaw band length: 2.480 mmwidth of saw-band: 27 mmdimensions of saw-band: 2.480 x 27 x 0,9 mmcutting angle: 0 - 60 °band speed: 20 - 90 m/minCuttingrange 90°: max. 225 mmcapacity 90 degrees: square: 190 mmcapacity 90 degrees: flat: 150 x 245 mmcapacity 60 degrees: round: 90 mmcapacity 60 degrees: square: 90 mmcapacity 60 degrees: flat: 120 x 90 mmcapacity 45 degrees: round: 145 mmcapacity 45 degrees: square: 150 mmcapacity 45 degrees: flat: 190 x 150 mmtotal power requirement: 1,5 kWweight of the machine ca.: 185 kgdimensions of the machine ca.: 1,5 x 1,2 x 1,6 mDocuments: Saw Bands: 1x Coolantsystem: Metal BandsawOPTIMUM - OPTIsaw S 275 PVThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inv. Num. : 8951 Type: TDC 622 EDGE MASTER Producer: MECAL Created: 2023 Parameters: Maximum sawing speed: 2400 1/min Cutting length: max. 6000 mm Engine power: 13.5 kW Machine weight: 3200 kg
cutting width: 3.400 mmMotor output: 2 x 1,1 kw kWweight of the machine ca.: ca. 400 kgsaw blade diameter: 330 mmswivellable: -45, 90, +45 °: 45, 90 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Year: 2007 - technically efficient, ready to work – after full service - disc diameter: 420 mm - cooling installation - double-sided pneumatic clamp - angle-adjustable crank - pressure reducer
Key data: 550 mm
Max. saw length: 6,000 mm Smallest cutting length: 335 mm Max. saw blade diameter: 550 mm Automatic length positioning via E 500 control Swivel inside and outside 22.5° - 90° - 140° Tilt the angles between 45 and 90 degrees Digital Angle Displays Moving roller conveyor Minimum quantity spraying device Pneumatically folding support arms
Key data: 500 mm
Max. saw length: 5,000 mm Max. saw blade diameter: 500 mm Automatic positioning of length and angle (90° or 45°), intermediate mitres adjustable from the front Moving roller conveyor Material support pneumatically folds up Minimum quantity spraying device Instruction manual Weight: 1400 kg
CNC Saw Brand: SOITAAB (FRIGGI) Model: SF300 CN Type: Automatic Structure: Double column cylinders Round cutting capacity: up to 300mm Saw blade speed variation Ethernet interface (Industry 4.0)
cutting diameter: 270 mmcutting speed: 20 - 110 m/mincutting width: 270 mm: 750 mmsaw band length: 2835 x 27 x 0,9 mmtotal power requirement: kWweight of the machine ca.: 0,9 tdimensions of the machine ca.: 2,0 x 2,0 x 2,0 mAutomatic band saw- Material feed up to 750 mm, multiple feeds possible.- Coolant systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 450 mmsaw band length: 4150 x 34 x 1.1 mmcapacity 90 degrees: flat: 450 x 480 mmcapacity 45 degrees: flat: LI 450 x 310 mmcapacity 45 degrees: flat: RE 450 x 290 mmband speed: 35 + 70 m/minwork height max.: 930 mmtotal power requirement: 2.35 kWvoltage: 400 Vweight: 950 kgrange L-W-H: 2150 x 1150 x 2115 mm well-maintained condition () current new price incl. accessories ~ 50.000 Euro special price on requestEquipment:- electro-hydraulic vertical mitre bandsaw- with large cutting range and small footprint- Robust material support table- electro-hydraulic mitre adjustment left right Only the saw frame swivels, everything else remains fixed incl. ELGO digital value display- electro-hydraulic material clamping- electro-hydraulic infeed from the saw frame Infinitely adjustable (cutting pressure control)- Operating instructions Special accessories included :- approx. 3.000 mm ...
Dimensions (L/W/H): 800x800x1350 mmweight: 35 kgtotal power requirement: 0 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 13000x1700x1700 mmWeight: 1950 kgTotal power requirement: 13,5 / 17,5 kW kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 700x1000x1300 mmWeight: 115 kgTotal power requirement: 0,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 13000x1700x1700 mmWeight: 1650 kgTotal power requirement: 10 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Band saw — horizontal Cutting diameter / cutting range (round) up to approx. 250 mm diameter Cutting range rectangular / square, typically also approx. 250 × 250 mm (depending on the material shape) Saw blade length ≈ 3660 mm Saw band width / thickness (band dimension) 25 mm belt width, approx. 0.9 mm thickness (e.g. 3660 × 25 × 0.9 mm) Cutting speed adjustable approx. 20 – 70 m/min, infinitely variable Weight of the machine approx. 700 – 850 kg
Key data: 400 mm
Saw blade diameter: 400 mm Cutting area flat 90°: 200 x 120 mm Saw area flat 45°: 140 x 120 mm Saw area flat: 30°100 x 100 mm Cutting range round 90°: 140 mm Saw range round 45°: 140 mm Sawing range round 30°: 110 mm Replenishment length electronically adjustable: max. 800 mm Coolant pump / minimum quantity spraying device Hydraulic material clamping Hydraulic material feed Weight: approx. 1300 kg
Saw blade diameter vertical: 600 mm Saw blade diameter horizontal: 500 mm Notching width: at 90° processing of profiles up to 300 mm, pointed mitres up to 30° Profile height max. 280 mm Notching depth: at 90° horizontally up to 185 mm / at 90° vertically up to 230 mm Material stop: swivel 30° - 90° - 45° Swivelling material stop with detent points and digital display Latch height motorized adjustable with digital display Motorized adjustment of angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material tensioners Coolant lubrication
Max. saw blade diameter: 350 mm Pneumatic material tensioners Table can be rotated left and right Manual feed
Technical data: Cutting range: 90° round: 260 mm 90° flat: 300 x 260 mm 90° square: 260 x 260 mm +45° round: 200 mm +45° flat: 200 x 240 mm +45° square: 200 x 200 mm +60° round: 165 mm +60° flat: 160 x 120 mm +60° square: 150 x 150 mm -45° round: 200 mm -45° flat: 200 x 240 mm -45° square: 200 x 200 mm Shortest offcut length: 35 mm Total connected load: 2.0 kW Saw motor, power frequency controlled: 1.5 kW Cutting speed infinitely variable at frequency controlled: 20 - 110 m/min Saw blade dimensions: 2910 x 27 x 0.9 mm Dimensions and weight: Length, approx.: 1020 mm Width, approx.: 1830 mm Height, upper part lowered, approx.: 1460 mm Height, top in maximum position: 1900 mm Material support height: 950 mm Total weight, approx.: 510 kg Equipment: - Stepless cutting speed - Saw blade guides made of carbide, replaceable - Hydraulic cutting feed - ...
saw blade diameter: 420 mmcapacity 90 degrees: round: 130 mmcapacity 90 degrees: flat: 160 x 100 mmcapacity 45 degrees: round: 110 mmcapacity 45 degrees: square: 130 x 80 mmturning speeds: 3000 U/minengine output: 2,0 kWtotal power requirement: 2,0 kWweight of the machine ca.: 190 Kgdimensions: 3,0 x 1,0 x 1,3 mUnderfloor aluminum circular saw- Hydropneumatic semi-automatic- pneum. Workpiece clamping deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 260 mmcapacity 90 degrees: round: 260 mmcapacity 90 degrees: square: 250 x 400 mmsaw band length: mmtable height: mmcutting speed: 20 - 80 m/minControl: konventionell total power requirement: 2,0 kWweight of the machine ca.: kgDimensions (LxWxH): 2,0 x 1,4 x 1,2 mHorizontal band saw, semi-automaticThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This BOMAR Individual 520.360 GANC was manufactured in 2019. It features an automatic operating mode with a mitre cutting range of 0° â 60°. The saw band operates at speeds between 20 â 120 m/min, accommodating a maximum material weight of 2,500 kg. Ideal for those looking to enhance their metal cutting capabilities. Contact us for more information about this machine.
This sawing machine was manufactured in 2000 by KALTENBACH. The KBS 851 DGNC features a miter tilting capability of -60° left and -50° right, accommodating material dimensions at 90° up to 850 x 500 mm. It supports various saw blade types including M2, M42, and M51, with a cutting speed range of 20-120 m/min. Includes an integrated chip tray and Proficut control software. Ideal for steel profile cutting in construction and trade. For more information about this sawing machine, please reach out to us.
This BERG & SCHMID VKS 370 VA was manufactured in 2019. It features a fully automatic hydropneumatic vertical circular saw with CNC frequency conversion. The machine includes a roller conveyor on the feed side (3m) and discharge side (2m), enhancing material handling. Starter Kit 1 with circular saw blades and coolant concentrate is also included. Consider the opportunity to buy this BERG & SCHMID VKS 370 VA Circular Metal Saw. Contact us for more information.
This Behringer HBP 420-723 G Metal Band Saw was manufactured in 2004. It features a Silberland B 660 / 15 m powered roller conveyor from 2010 and has operated for approximately 15,800 hours. The saw offers a cutting speed of 10-120 m/min and is powered by a 5.5 kW saw drive motor. Ideal for handling a variety of cutting sizes and angles. Contact us for more information about this machine.
This sawing machine was manufactured in 2010. The KASTO Radial M10 can handle a variety of materials with cutting capacities up to 100 mm for round solid materials and tubes, and 170 x 90 mm for flat materials. It operates on a 400 V 50 Hz 3-phase connection and measures 600 x 800 x 1700 mm, weighing 452 kg. For more information about this sawing machine, please reach out to us.
This KALTENBACH SKL 450 NA Circular Metal Saw was manufactured in 2007. It features a vertical saw principle with a rotating table for mitre and longitudinal cuts up to 180 degrees. The saw unit is mounted beneath the table, ensuring optimal cutting range utilization. It includes a hydro-pneumatic saw blade feed and a large viewing window for enhanced work area visibility. Ideal for sawing aluminum and non-ferrous metals. Contact us for more information about this machine.
This RALC ITALIA CUTTING LINE LYBRA was manufactured in 2014. It features an automatic circular blade for cutting metal tubes, including solid, tubular, and profiled types. Key components include a bar loader up to 6500 mm, multiple cutting capabilities, and a Siemens PLC for enhanced control. Ideal for high precision metal cutting. Contact us for more information about this machine.
This 3-axis MOSSNER Rekord SSF 630 Metal Band Saw was manufactured in 2019. It features an 11 kW reinforced motor, dual-speed manual transmission, and a complete roller guide. The saw includes a feed table with 4 T-slots, an emergency stop button, and an LED work light. Its mounted on a steel plate for stability, with spare saw blades included. Consider the opportunity to buy this MOSSNER Rekord SSF 630 Metal Band Saw. Contact us for more information.
Saw blade diameter: 350 x 2,5 x 32 mmcapacity 90 degrees: square: 90 x 90 mmcapacity 90 degrees: round: 100 mmcapacity 90 degrees: flat: 170 x 90 mmMotor output: 1,8 kWmachine weight ab.: 500 kgdimensions: 1200 x 800 x 2000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
