Manufacturer:
(Category: 106)
Slide size 810x610 mm Slide stroke 550 mm Worktop size 810x610 mm DISMANTLING AND LOADING COST: EURO XXXXXXXXXX The cost does not include any disposal of the oils present in the system, this will be invoiced during disassembly Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-17
DISMANTLING AND LOADING COST: EURO XXXXXXXXXX Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-4
Slide size 475x130 mm Slide stroke 100 mm Shots per minute 10-50 Max mould height 400 mm Worktop size 800x570 mm DISMANTLING AND LOADING COST: EURO XXXXXXXXXX The cost does not include any disposal of the oils present in the system, this will be invoiced during disassembly Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-6
Technical data Note: There was no original machine documentation. All subsequent technical data were read from the nameplate to the best of our knowledge and taken from publicly available sources. Manufacturer: COMCO Type: WE 680/4 Year of Make: 1987 Serial Number: 100 Machine Type: Hydraulic Press Operating voltage: 380 V Frequency: 50 Hz Motor power: 11 kW Max. pressure: 200 bar Press force: 300 kN Air pressure: 6 – 10 bar Machine weight: approx. 3,000 kg Configuration 4-post design Hydraulic power unit Safety Light Curtain (SICK) Protective grille / enclosure Electrical control cabinet with control panel Pressure gauge (pressure gauge) Hydraulic control with valve block Auction-ID: A7-46048-18
Rice spotting press Weight: 5000kg Auction-ID: A7-46048-138
SINGLE POINT OPEN BACK INCLINABLE POWER PRESS Inv. No. 11.421PC Make IWK Model PEKRON 150Z Machine No. 1512 Capacity 150 tons Ram stroke 200 mm Ram adjustment 100 mm Shut height min/max 370 / 570 mm Strokes per minute 40 Knock out in ram 0 – 70 mm RPM 10 - 815 Throat 290 mm Power inclinable 30 degrees, 4kW Table 1000 x 630 mm Ram 760 x 410 mm Q 12 Volts 230 / 400 Cycles 50 Hz Including: Bolster plate 1.000 x 630 x 80 mm Bolster plate 1.000 x 630 x 90 mm Table opening, diameter 440 mm Updated electrics 2004 CE certified Auction-ID: A1-45737-200
HYDRAULIC PUNCHING PRESS Inv. No. 13.085P1 Make SAHINLER Model HKM40 Capacity 40 Ton Punching Ø 20 in 15mm Stroke 50 mm Radius 175 mm Round cutting 30 mm Square cutting 25 mm Angle bar 80 x 80 x 8 mm Flat bar 200 x 13 mm 300 x 6 mm Blade length 356 mm Motor power 3 KW Weight 580 Kg Auction-ID: A1-45737-140
SINGLE POINT OPEN BACK INCLINABLE POWER PRESS Inv. No. 11.420PC Make IWK Model PEKRON 150Z Machine No. 1501 Capacity 150 tons Ram stroke 200 mm Ram adjustment 100 mm Shut height min/max 370 / 570 mm Strokes per minute 40 Knock out in ram 0 – 70 mm RPM 10 - 815 Throat 290 mm Power inclinable 30 degrees, 4kW Table 1000 x 630 mm Ram 760 x 410 mm Q 12 Volts 230 / 400 Cycles 50 Hz Including: Bolster plate 1.000 x 630 x 80 mm Bolster plate 1.000 x 630 x 90 mm Table opening, diameter 440 mm Updated electrics 2004 CE certified Auction-ID: A1-45737-199
Equipped with 10 crimp sets; unused Auction-ID: A1-41993-115
Equipped with 3 crimp sets; unused Auction-ID: A1-41993-117
Capacity 4 ton, manual, never used Overall dimensions: 500 x 400 x 800 mm Weight: 50 kg Auction-ID: A7-45833-249
Capacity 4 ton, manual, never used Overall dimensions: 500 x 400 x 800 mm Weight: 50 kg Auction-ID: A7-45834-249
Capacity 4 ton, manual, never used Overall dimensions: 500 x 400 x 800 mm Weight: 50 kg Auction-ID: A7-45833-136
Manual gantry press 20 tons Overall dimensions: 1200 x 800 x 500 mm Weight: 100 kg Auction-ID: A7-45834-224
Capacity 4 ton, manual, never used Overall dimensions: 500 x 400 x 800 mm Weight: 50 kg Auction-ID: A7-45834-136
Manual gantry press 20 tons Overall dimensions: 1200 x 800 x 500 mm Weight: 100 kg Auction-ID: A7-45833-224
Hydraulic pressure 700 bar with hand pump Auction-ID: A1-45682-22
Brake 2x45 Nm, mounted on AUMANN substructure Auction-ID: A1-45682-30
Frame press, CE certified according to the latest guidelines. - With manual hydraulics - Move cylinder sideways - 2 pcs press block 200x250x40mm / 200x70x40mm, max. 30t with M16 threaded holes and some M16 threaded bolts - 8 pcs press bolts, 10 - 30mm, with quick-change adapter, max. 20t - 2 Press pads Pressure 20 t Stroke 180 mm Clear width between uprights 540 x 100 mm Installation height max. 990 mm Cylinder diameter 72 mm Piston diameter 48 mm Machine weight approx. 0.12 t Space requirement approx. 0.8 x 0.7 x 1.8 m Condition: never used / new (5) Auction-ID: A7-45761-787
Schechtl BA 2010 Press Brake Machine, Guillotine and Calender Type: Press brake machine, guillotine and calender Manufacturer: Schechtl Model: BA 2010 Year of manufacture: 1984 Serial number: 14640 Performance: Ø 88 mm Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-39
This frame press is CE certified according to the latest guidelines - With manual hydraulics - Move cylinder sideways - 2 pcs press block 200x250x40mm / 200x70x40mm, max. 30t with M16 threaded holes and some M16 threaded bolts - 8 pcs press bolts, 10 - 30mm, with quick-change adapter, max. 20t - 2 Press pads Pressure 10 t Stroke 180 mm Clear width between uprights 335 x 115 mm Installation height max. 340 mm Cylinder diameter 56 mm Piston diameter 40 mm Machine weight approx. 0.05 t Dimensions approx. 0.75 x 0.53 x 1.6 m Auction-ID: A1-45681-737
5.000 € 