Manufacturer:
(Category: 106)
Force of pressure: 30 to piston stroke: 150 mm table width: 185 mm passage (S): 530 mm bore (F): distance of 140 mm cylinders - table (F1): distance 150 mm cylinder - table (F2): 1030 mm cylinder movable (M): 200 mm width (A): (B depth of 800 mm): 700 mm height 1 (C): 1775 mm height 2 (D): 1805 mm weight: 162 kg
Capacity: 50 ton Projection: 225 mm Stroke: 320 p/min Large table: 500 x 800 mm
Pressing force: 40 t table size: 670 x 470 mm plunger surface: 670 x 470 mm clearance between the pillars: 620/470 mm gr. Height: 740 mm Preß speed: 20 mm / s rapid traverse: 50 mm ejector force: 3T Electr. Supply: 380 V, 9.5 kW space: 2200 x 1875 x 3000 mm weight: 2400 kg
used
Force of pressure: 63 t table size: 610 x 800 mm throat depth: 350 mm stroke: 200 mm Electr. Supply: 380 V, 15 kW space: 1800 x 920 x 2440 mm weight: 3940 kg
Force of pressure: 75 t projection: 300 mm table size: 620 x 800 mm Durchfalloch in the table: 225 x 325 mm table adjustment: 175 mm plunger surface: 180 x 475 mm slide adjustment: 80 mm stroke adjustment: 16-140 mm stroke rate: 90 / min drive motor: 380 V, 3 kW space: 1700 x 1200 x 2500 mm weight: 3300 kg
The small laboratory press MHSP5 can perform very well with the round stamp (70 mm diameter) deformations of many materials. By delivering fine (0.5 mm per wheel revolution), deformations are carried out very accurately. Small punching or stamping operations are possible. The press is driven by a worm gear screw jacks, which requires minimal hand strength by high reduction ratio. The pressing frame consists of stable-dimensioned polyamide PA6G. Here are some technical data:-static force 5 KN (0.5 to) - portable presses frame made of polyamide PA 6 G, very stable design, with FEM program added - spindle manual jacks 20 mm, pitch 5 mm - with Handwheel diameter 120 mm and handle - gear ratio 1:10, per the Handwheel 0.5 mm screw - table size 235 195 mm - clearance width 190 mm - stamp size diameter 70 mm with 4 holes 8 mm for mounting a major stamp Very easy operation with spindle and w ...
Bruderer BSTA 18 600 spm High-performance speed from 100-600 spm Force Max 180 KN Adjustable stroke New Silicon control Pneumatic and hydraulic all new Strip width max 190 mm Feed Bruderer BBV With digital stroke counter with programmable auto stop and digital speed counter Overhauled, very good condition, ready to work.
45 To-Stoessel performance adjustable 45 mm hub adjustable 8-80 mm table size 690 x 410 mm punch mounting 50 mm unloaded 200 mm height 400 mm electric pneumat. Ortlinghaus single-disc clutch and disc brakes with auxiliary brake, Central grease lubrication system, Hohenverstellbar. Report, Wellenrissprufung, see table, UVV - 2014 - still in use ? see operating instructions, Tech.Zustand - good, ready for use
used
Max. capacity 1000 tons Slide stroke 240 mm Shut-height (max.) 650 mm Wedge adjustment 10 mm Number of slide strokes 100 rp
Crimping force at 12 bar: 8 to Pressure to 4 bar: 4 Table size 280 x 280 mm Height 350 mm RADIUS 160 mm Weight 350 kg W x D x H approx. 0.5 x 0.75 x 2,15 m -Stroke adjustment with fine Skallierung: 0.02 mm -Anti-rotation -pneumatic foot switch
used
Grote & Hartmann, 380V,50 Hz, 0, 45Kw, Fabrikatnr. 5618/84
Hydraulic Horizontal Straightening Press, used Horizontal multi purpose press, used type: HHP160 max. pressing force/ max. tonnage: 160 t Year built/ year of make: 1965 Manufacturer/ make: Pellissier Hanau max. pressing force/ max. tonnage: 160 t Piston stroke/ stroke of plunger: 400 mm Piston diameter / diam. of piston: 300/ 185 mm Extension / depth of throat: 225 mm Table size/ table size: 1150 x 350 mm Pressing speed/ speed of pressing: 16 ... 6 mm / sec Advance/ advance: 75 mm / sec Return/ rapid return: 208 mm / sec Installation width between Kobendruckstück and traverse pressure pieces/ distance between plunger with ram and locators: 320 mm Distance of the pressure pieces on pistons or table / distance between locators of piston and table: 50 ... 888 mm Total p ...
Hand spindle press, used Balancier, used Type: PSHZ 25/I Pressing force / rated pressure: 25 t Stroke/ stroke: 250 mm Table size/ table size: 400x 500 mm Stössel/ ram: 200 x 500 mm Table opening / hole in table: 140 mm Weight: 0.9t
Extension / distance slide center to frame: 320 mm Sheet thickness / sheet thickness: 3.2 mm Cutting surface / cutting capacity: 1600 mmx2 Distance table pestle/ distance table slide: 417 mm Stroke adjustment / adjustment of stroke: 16...125 mm Stroke number/ number of strokes: 45 / min Pestle adjustable/adjustment of slide: 80 mm Table size / surface of bed: 800 x 630 mm Bumper size / surface of ram: 500 x 400 mm Slope of the stand / inclination of coulmn: 25 Power of main motor power: 4 kW Weight: 2.5 Specification: C-frame punching press, used
Capacity: 125 ton, Strokes per minute: 85-500 / min, Slide: 870 x 550 mm, Plate width: 260 mm, Year of manufacturing: 1980
Hand spindle press / column pressManufacturer: VEB (K) Gerätebau OranienburgType: PSHS 10Masch.-Nr.: 0256Year of construction: 1958Origin: GDREquipment: • Solid cast design • Manual operation via flywheel / lever • Height-adjusta ble press table • Robust spindle guide • Mechanical version without electricsCondition:Used, functional. • Pressure capacity: 10 t • Plunger stroke: 200 mm • Spindle thickness: 50 mm • Weight: approx. 175 kgDimensions (approx.): &nb ...
As good as new machine Operating hours in motion: 29.5 Hour meter: 2244 Strokes: 159328 incl. interchangeable decoiling device, strip straightener and Scrap ejection. Mains voltage: 3LNPE/400V/50Hz Control: Beckhoff/PNOZ multi Electrical wiring diagram: E$-M02070 Pre-fuse: 160 A Nominal power: 37 KW Nominal force: 2000 KN Working capacity: 16000 J Stroke rate in continuous stroke: 30-150 min-1 Max. stroke rate in single stroke: 30 min-1 Max. clutch cycles in single stroke: 20 per min Runtime: 0.158 s Min. safety distance: 317 mm Clutch pressure: 5.0 bar System pressure: 6.0 bar Stroke length: 20-220 mm Max. plunger adjustment: 150 mm Usual stopping point of the ram: OU Table dimensions: 1800x1100 Plunger dimension, max. tool dimension (WxD): 1800x1100 mm Max. weight tool top: 1700 kg Mass without additional equipment: 29000 kg Auction-ID: A1-46003-1
Manufacturer: VEB Pressenwerk MorgenrötheType: PSHZ 40Name: Screw press / balancing press (manual)Description:Manually operated screw press (balancing press) in solid cast construction from industrial production. The press works purely mechanically via spindle and hand lever, without hydraulics or electrical components. Suitable for pressing, straightening, assembly and joining operations in the workshop, maintenance and manufacturing. Robust and durable construction from GDR production. Scope of delivery:– Screw press as shown– Press table / support– Press type: Screw press / balancing press– Operation: manual– Size: 40– Press force: Size 40 (according to experience, corresponds to approx. 40 t press force)– Maximum installation height: 460 mm– Total weight: 1650 kgDimensions:– Width: 1800 mm– Depth: 1800 mm– Height: 2350 mmWeight:1650 kg Auction-ID: A7-46417-70
RODCRAFT WP100P workshop press ; hydraulic pneumatic and manual with 2 speeds ; suitable for pressing, straightening and assembly work ; Capacity: 100 tons; Air pressure: 7.5 – 8.5 bar ; Cylinder stroke: 300 mm ; Inner frame width: 787 mm ; Drevelset: yes ; Weight approx. 800 kg; Aged model Auction-ID: A1-45170-8
Voltage: 380 volts ; Capacity: 60 TONS; Stroke length: 250 mm ; Width: 570 mm ; Auction-ID: A1-45170-12
General overhauled, new seals etc. Auction-ID: A1-46315-42
.jpg)
.jpg)
.jpg)
100 € 