Manufacturer:
(Category: 106)
The Dorst TPA 5 is a refurbished mechanical powder compaction press, designed for precision and efficiency in industrial applications. It offers powerful performance with a maximum pressing force of 50 kN and a withdrawal force of up to 40 kN. This makes it suitable for a variety of powder compaction tasks, with a filling height of 50 mm and pressing travel capability of 25 mm. This machine provides flexibility with an upper punch stroke of 85 mm and an adjustable travel span of 70 mm, operating at 6 to 30 strokes per minute. It consumes around 50 liters of compressed air per minute and has a total electrical load of approximately 4.00 kW. With durable construction, the Dorst TPA 5 maintains a quiet operation at a sound level of 70 dB(A). The presss compact dimensions, approximately 1200 mm in both width and depth and a height of 2150 mm, with a weight of about 1,200 kg, make it a manage ...
Press capacity: 63 ton Ram stroke adjustable: 8 - 60 mm Slide adjustment: 80 mm Shut height (stroke down, adjustment up): 300 mm Table surface area : 810 x 550 mm Slide area: 700 x 420 mm Hole in table: 550 x 140 mm Distance between oil tray: 700 mm Table height over floor: 920 mm Number of strokes: 65 - 400 s.p.m. Weight of machine approx.: 8 ton Dimensions L x W x H: 2935 x 1170 x 3000 mm Main Motor: 11 kW
Capacity: 35 ton Throat depth: 225 mm Ram stroke: 8 - 80 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 325 mm Table surface area : 600 x 450 mm Slide area: 300 x 225 mm Number of strokes: 160 s.p.m. Required power: 2,2 kW Dimensions L x W x H: 1000 x 1600 x 2200 mm Weight of machine approx.: 1,9 ton
Press brake with Stäubli robot cell press Manufacturer: LA G Model: GBS R 1250 50 The machine was only used for a very short period of time.
CONTROLS PC controller BECKHOFF PRESS DESIGN drive system: servohydraulic frame design: H-frame, tie rod quick die change system: yes feedstock transport direction: left to right SLIDE total force (nominal): 1100 to stroke: 130 mm stroke rate (max.): 60 /minCOUNTER RAM nominal force: 330 to stroke: 40 mmV-RING nominal force: 500 to stroke: 40 mmTOOL DIMENSIONS lower table (left-right): 960 mm lower table (front-back): 960 mm upper table (left-right): 960 mm upper table (front-back): 960 mm shut height max.: 470 mmOVERALL SPECIFICATIONS (COIL LINES) sheet width max.: 500 mm sheet thickness max.: 16 mm coil weight max.: 8 to feedstock transport direction: left ...
Capacity (ton) 315 Table size, mm 2500 x 1250 Slider stroke, mm 400 Shut height,mm 750 Strokes per min 25 Press weight, kg 50900
Inv. Num. : 8630 Type: EHP 50 Producer: Darley Created: 1997 Parameters: Control system: DELEM Compressive force: 50 t Maximum bending length: 2000 mm Machine weight: 2600 kg
pressure: 1000 tdistance between columns: 5000 mmstroke: 500 mmHeight of centres: 400 mmMotor output: kWreus: U/minOverall size: 6000 x 2500 mmWeight: 1000 kgDistance between centres: 3500 mmtotal power requirement: kWweight of the machine ca.: 220 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 200 ttable length: 1600 mmtable width: 1300 mmdayligth: 1700 mmtotal power requirement: kWweight of the machine ca.: 19 tdimensions of the machine ca.: 2,95 5 6 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Working width: 2500mm, max. sheet thickness aluminium/steel/stainless steel: 3mm/2mm/1.25mm, feeding length range: 575mm-2500mm, feeding width range: 210mm-1500mm, max. bending height: 200mm, max. negative bend: 35mm, max. diagonal twist: 3300mm, rotary table position: 0°/90°/180°/270°, working height: 1150mm. Clamping stroke: 210mm, clamping force: 240kN, clamping lowering and return speed: 50mm/s, upper beam swivel range: 135°, upper beam swivel speed: 90°/s, lower beam swivel range: 135°, lower beam swivel speed: 90°/s. Machine dimensions X/Y/Z: approx. 4050mm/1600mm/2400mm, weight: approx. 13000kg. Documentation available. An on-site inspection is possible.
PRESS DESIGN drive system: hydraulic frame design: C-frame, single sided PRESS FORCES total force (nominal): 12 toSLIDE stroke: 200 mmELECTRICAL SPECIFICATIONS mains voltage: 380 V mains frequency: 50 HzDIMENSIONS / WEIGHTS total weight approx.: 1000 kgHour counter: 30'181 hlast safety check: 27.07.2023, overrun time 38 ms, overrun distance 60 mm
CONTROLS PLC SIEMENS S7 PRESS DESIGN drive system: knuckle-joint frame design: H-frame, monoblock openings in uprights: yes number of suspensions: 2 feedstock transport direction: left to right PRESS FORCES total force (nominal): 315 to nominal work capacity: 38 kNmPRESS TABLE table surface (left-right): 2000 mm table surface (front-back): 1200 mm thickness of bolster plate: 200 mmSLIDE slide force: 315 to table surface (left-right): 1995 mm table surface (front-back): 1100 mm stroke: 160 mm stroke rate (max.): 80 /minSLIDE (MECHAN. PRESS) slide adjustment: 140 mm stroke rate (min.): 20 /min stroke rate (max.): 80 /min main drive power: 90 kWTOOL ASSEMBLY DIMENSIONS& ...
pressure: 100 tthroat: 355 mmstroke: mmtotal power requirement: 11,5 kWweight of the machine ca.: 8,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 3 t, 150 mm
For sale in new condition HYUNDAE CETTA HHP-3 hydraulic press "more pieces" manufacturer: HYUNDAE "Korea" type: HHP-3 year of manufacture: 2018 load range: 1-3 tons Stroke [mm] 150 open height: 250 mm -safety light gate -two-handed operation .-mobile work table Hyundae press control Pressing rod closing speed: 178mm/sec Pressing rod pressing speed: 54mm/sec Opening speed 79 mm/s Table size: 450x360mm Max. Working pressure: 60kg·f/㎠ Hydraulic motor 1,5 kW 3 phase/4P 200v Weight: 350kg machine height "without table": 1415mm machine length: 950mm machine width: ca 700mm working table with casters or level bolts
Key data: 5 t, 150 mm
Hydraulic Press Atsugi AP-5-KL Used Load Range: 20-50 (kN) Stroke (mm): 150 Lower Speed (Approach Fast Speed: 350 (mm/s) Lower Speed (Under Pressure Slow Speed: 36mm/s Rise Speed 250 (mm/s) Working Area Open Height: 250mm Open Depth: 180mm Table Size: 450x50mm Motor Specification 3 Phase AC200V 4P 1.5KW Two-Hand Operation . Mobile Worktable Fuel Oil / Quantity Daphni Hydraulic 46/9L Total Weight (kg) 270 Body Size Height (mm) 986 Width (mm) 485 Depth (mm) 920
Inv. Num. : 8585 Type: KPRW 160 Producer: Kieserling Created: 1972 Parameters: Compressive force: 160 t
Inv. Num. : 8584 Type: PEDA 160 Producer: IWK Created: 1972 Parameters: Compressive force: 160 t
Inv. Num. : 8583 Type: REP 100 Producer: Heilbronn Created: 1989 Parameters: Compressive force: 100 t Stroke length: 6-100 mm Maximum stroke rate per minute: 100 1/min Total power requirement: 11 kW Machine weight: 7000 kg
Offer 25247 Specifications: - Max. pressing force 50 t - Max. ram stroke approx. 260 mm - Lifting speed fast approx. 1540 mm/min - Lifting speed slowly approx. 210 mm/min - Stand width approx. 770 mm - Stand depth approx. 195 mm - Min. / max. installation height approx. 200 / 1100 mm - Table height-adjustable with 5 plug-in bolt grids each approx. 180 mm - Support plate approx. 450 x 450 mm - Height adjustment of the table with hand crank cable - Drive 400 V / 1.5 kW - Space requirement approx. W 1750 x H 2100 x D 850 mm - Weight approx. 600 kg
pressure: 60 tthroat: 280 mmstroke: 10-140 mmno. of strokes: 110 Hub/minram - range of adjustment: 60 mmtable surface area: 740x560 mmram surface: 380x195 mmhole in the table: 300x200 mmtable height: 760 mmtool hole in ram: Ø 40 mmweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 35 tthroat: 220 mmstroke: 8-96 mmno. of strokes: 120 Hub/minram - range of adjustment: 50 mmtable surface area: 580x440 mmram surface: 305x170 mmhole in the table: 215x175 mmtable height: 870 mmtool hole in ram: Ø 40 mmweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 45 tthroat: 230 mmstroke: 4-80 mmno. of strokes: 120 Hub/minram - range of adjustment: 55 mmtable surface area: 695x455 mmram surface: 365x180 mmhole in the table: 220x180 mmtable height: 890 mmtool hole in ram: Ø 40 mmweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 tthroat: 300 mmstroke: 10-140 mmno. of strokes: 60 Hub/minram - range of adjustment: 60 mmtable surface area: 800x500 mmram surface: 430x230 mmhole in the table: Ø150 mmtable height: 860 mmtool hole in ram: Ø 50 mmweight of the machine ca.: 5,2 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The Dorst DK 250 is a robust used powder compaction press engineered by DORST, offering a substantial pressing force of up to 2500 kN. It supports operations with a maximum withdrawal force of 150 kN and a supporting force in the pressing position reaching 120 kN. Designed for precision, this model includes a 220 mm upper punch stroke with an adjustable travel of 120 mm. The press accommodates a pressing travel and withdrawal travel, each up to 50 mm, making it versatile for various pressing tasks. Operational performance ranges from 6 to 25 strokes per minute, and it provides a filling height of up to 100 mm. The Dorst DK 250 is efficient, consuming approximately 500 liters of air per minute and demanding a connected load of around 60.0 kW. Its dimensions, at 2500 mm in width, 1900 mm in depth, and 4800 mm in height, alongside a weight of approximately 18,500 kg, underscore its solid co ...
AIDA NC2-250(1) 250t eccentric press in excellent condition /ctA2/ Manufacturer: AIDA Type: NC2-250(1) Push force: 160t Year of manufacture: approx. 1991 Stroke length: 170mm Distance above table: (adjustable) 280-400mm Table size: 2700x760mm Bear size: 2100x700mm Electrical power: 3x200V(), 30kW - Japanese standard Pgsc N D D Hou Dxb Tjxop Net weight: 35000kg Size: 2760x2800x3980mm Automatic greasing system. Automatic cutting oil dosing - RAZIOL EST-02 Optionally with disc winder and straightener.
Nominal pressing force ... 100t Table dimensions ... 1000 x 640mm Stroke adjustment ... 125mm Plunger adjustment ... 90mm Number of rams ... 75-150 rpm Main engine power ... 6/10kW L x W x H ... 1725 x 2230 x 2970mm Mechanical weight ... 10100kg
pressure: 25 tthroat: 200 mmstroke: mmpressure: 25 tno. of strokes: 140 Hub/minwindow in frame: 240 mmadjustment of stroke: 8...80 mmram - range of adjustment: 50 mmsurface of ram: 355 x 220 mmtable-size: 560 x 400 mmhole in table: 160 mmtotal power requirement: 3 kWweight of the machine ca.: 2,23 tdimensions of the machine ca.: m- distance table slide: 250 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
