Manufacturer:
(Category: 102)
Rafamet KCFB-320 Vertical Boring Mill 125.98” Table Diameter, 137.79” Max. Turning Diameter, (2) Swiveling Ram Heads, 39.4” Ram Stroke, +/- 30 Degrees Ram Swivel, 98.4” Height Under Rail, 0.8-40 RPM Table Speeds, 55,000 Lbs. Table Capacity, Pendant Controls, 2-Axis Quadra Check Digital Readouts, Side Head, Threading & Taper Turning, 75 HP Table Motor, S/N 126240
Rafamet KCFB-320 Vertical Boring Mill 125.98” Table Diameter, 137.79” Max. Turning Diameter, (2) Swiveling Ram Heads, 39.4” Ram Stroke, +/- 30 Degrees Ram Swivel, 98.4” Height Under Rail, 0.8-40 RPM Table Speeds, 55,000 Lbs. Table Capacity, Pendant Controls, 2-Axis Quadra Check Digital Readouts, Side Head, Threading & Taper Turning, 75 HP Table Motor, S/N 126240
Key data: 300 mm
Lathe CNC turning center with 2 spindles Emco Hyperturn 45 Year of manufacture 2018 Switch-on hours: 25,386 h Ready for operation (automatic mode): 17,035 h Production operation: 8,619 h Original price: 270.000,- € net Current leasing rate: 2,629 € Chip conveyor Bürener SPE 63/12-225 Year of construction 2018 Bar loading magazine TOP Automazioni ETL8-50 12-speed tool turret Powered tools on both turrets Y-axis Automation with EMCO bar feeders, swivel loaders or gantry loaders EMCONNECT - Digital Process Assistant (Sinumerik ONE) WORKSPACE Travel in X/Y/Z 160 (150)/70/510 mm Max. bar passage 45 (51) mm Max. turning diameter 300 mm Circumferential diameter over bed 430 mm Rapid traverse speed X/Y/Z 30/15/45 m/min MAIN SPINDLE Max. speed 7000 rpm Max. drive power 15 kW Max. torque 100 Nm SUB-SPINDLE Max. speed 7000 rpm Max. drive power 15 kW Max. t ...
greates pass round over bed: 960 mmswing diameter over bed slide: o: 860 / u: 730 mmturning diameter over bed slide: o: 860 / u: 400 control: SIEMENS - 840 D forward bearing diameter: 200 mmCNC Turning- and Milling Center | HEYLIGENSTAEDT - HEYNUMAT 24 UK-2 / 2000equipped with a turret for driven tools as well as tailstock.The machine is in a well-maintained condition andcan be inspected at any time under power.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: HEYNUMAT 24 UK | HEYNUMAT 24-UK | HEYNUMAT 24 UK 2 2000The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The machine is in good technical condition, after prior agreement possible to test. Control system – Siemens Including filtration. Bed inclination Bed material Number of guides 45 cast iron 3 (4 with Y-axis option) WORKING SPACE (V1- V4) Swing diameter over bed inch 19.69 Swing diameter over cross slide inch 11.42 Largest turning diameter inch 7.87 200 ч Distance between centers inch 30.71 Largest turning length inch 19.69 15.82 20 Max. weight of flying unsupported part of workpiece lb 35 Max. distance of center of gravity of flying unsupported part of workpiece inch 165 from spindle face Max. workpiece weight clamped between centers lb 100 X-axis travel length inches 7.48 Y-axis travel length (OР.) inches 3.14 (+/- 1.57) Z1-axis travel length inches Z3-axis travel length inches Spindle axis height above floor inches 20.67 21.65 39.26 (38.77+1.18) MAIN SPINDLE Spindle face (flat face ...
Mazatrol Matrix Control Max. turning diameter 530 mm Max. machining length 500 mm Max. bar passage 52 mm Travel X/Y/Z 450/200/550 mm Main spindle max. speed 5,000 rpm C-axis Milling spindle max. speed 12,000 rpm B-axis -30°-190°, 1° indexing Capto C6 Tool Holder Tool magazine with 72 tool positions Max. tool diameter 90 mm Max. tool diameter with free secondary positions 125 mm Max. tool length 210 mm Tailstock MK5 Automatic Parts Catcher (D:65 x L:120 x 2.5KG) Automatic Tooleye Conveyor Cooling by the spindle, 70 bar Coolant system with 70 bar high-pressure pump and paper belt filter Milling spindle synchronized threading Rapid traverse stylus angle of inclination during movement Cylinder (G07) + Polar Interpolation (G12.1) Signal lamp 1 pcs Irco Bar Feeder ILS-MUK-7012 -Max. rod length: 1,200 mm 1 pc oil mist extraction
turning length: 3.000 mmgreates pass round over bed: 810 - 760 mmswing diameter over slide rest: 740 mmcontrol: SIEMENS - 840 C max. turning diameter: 800 mmturning diameter over slide: 740 mmtravel -x2 axis: 875 mmtravel -z2 axis: 3.700 mmCNC Turning- and Milling Center | NILES-SIMMONS - N40 MC / 3000equipped with a well as travelling lynette and tailstock.Additional equipment:- Centering points,- Jaw sets,- Clamping jaws,The machine is in a well-maintained condition andcan be inspected at any time under power.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: N-40 | N 40 | N40MC3000 | N40MCThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Max. rod Ø 20 mm Max. machining length 165 mm Spindle speed 8,000 1/min Max. rod Ø sub-spindle 20 mm Max. speed sub-spindle 8,000 1/min Number of tools that can be used: 21 Turning Tools Multiple Chisel Holders: 6 Driven tools for transverse machining: 3 Front side drilling tool: 4 Rear drilling tool: 8 Speed driven tools: 8,000 1/min
MAchine is in good working condition.
TAKISAWA TW-46 - CNC LATHE Year of construction : 2008 Specifications: - Center spacing/turning length: 900 mm - Turning diameter : 450 mm -X:250 mm -Z:900 mm - Spindle passage diameter: 60 mm - Engine power: 20 kW - Total weight: 6500 kg
YOU-JI YV600E - CNC CAROUSEL LATHE Year of construction : 2016 Chuck diameter : 600 mm Max. swivel range : 800 mm Max. turning height : 600 mm X: -50mm / +485mm Z: 800 mm Max. table load : 1 T Column travel : 1,250 mm Total power : 32 kW Machine weight : 15.5 T (approx.) Control: FANUC Oi-TD
MOWEG (NILES) DKZ 4000 -UNIVERSAL CAROUSEL LATHE Year of construction : 1977 Chuck diameter : 3,500 mm Max. swivel range : 4,000 mm Max. turning height : 2,000 mm Max. table load : 20 T Column travel : 1,250 mm With digital display
DÖRRIES CTE 300 -5100 V6 - CNC CAROUSEL LATHE Year of construction : 1980 Electrical and electronic overhaul : 2002 Chuck diameter : 3,000 mm Max. swivel range : 6,000 mm Max. turning height : 2,700 mm Max. table load : 50 T Travel: X-axis : 2,550 mm Z-axis : 1,250 mm Y-axis : 5,054 mm (table) With C-axis Column travel : 1,250 mm Control Siemens : Siemens 840C Angle milling head
A lathe Meuser with defective return is available. Center height: 185mm, distance between centers: 700mm, swing over bed/cross slide: 370mm/200mm, bed width: 320mm, spindle bore: 47mm, speed: 1400rpm. Machine dimensions X/Y/Z: approx. 2200mm/1000mm/1400mm, weight: approx. 1500kg. An on-site inspection is possible.
- Control: SIEMENS SINUMERIK 840-C - Max. rod Ø: 65 mm - C-axis - Turntable main spindle: 31 - 6,300 rpm - Turret 1: 8 stations, 4 of which are powered - Revolver 2: 8 stations, 4 of which are powered - Speed applied Operating time: 4,000 1/min - Both turrets with internal cooling - High-pressure system -Conveyor - Bar feeder IRCO SiMag 65 - Max. rod length: 3200 mm Dimensions LxWxH: - Machine 3400 x 1700 x 1800 mm - Bar feeder 4000 x 1000 x 1400 mm - Chip conveyor 3000 x 1100 x 1600 mm Total weight: approx. 6,000 kg
Inv. Num. : 8638 Type: SPU 20 Producer: MAS Created: 1995 Parameters: Control system: Siemens Maximum turning length: 700 mm Maximum turning diameter over bed: 600 mm Maximum turning diameter over support: 380 mm
Inv. Num. : 8637 Type: MF SPRINT 65 Producer: Gildemeister Created: 1999 Parameters: Control system: Siemens Maximum turning diameter: 200 mm
chucking diameter: 250 mmworkpiece dia.: 200 mmcontrol: Siemens 840 D sl c-axis: Position genauigkeit arcs 10tool turret with 12 work positions: 12 turning spindle: 2 spindle turning speed range: 6.000 / (4.500) U/minSpindle power: 26 / (28,3) max. torque on the spindle: 150 / (300) spindle nose: 55026 - A6 tool taper: VDI 40 turning speeds: 10.000 U/minz-travel: 370 mmx-travel: 30 mmy-travel: +- 40 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Turning length: 705mm, turning diameter: 230mm, travel X1/X2: 165mm/195mm, travel Y: 100mm, travel Z1/Z2: 700mm/702mm, bar passage: 51mm, speed: 6000rpm, tool positions: 2x12. Machine dimensions X/Y/Z: approx. 5100mm/2200mm/2500mm, weight: approx. 8400kg, control: Fanuc 31i-B, operating hours: 1565h, spindle hours: 506h. Includes transformer, chip conveyor, filter system, and cooling unit. The cabin door window is broken. Documentation available. An on-site inspection is possible.
Turning length: 705mm, turning diameter: 230mm, travel X1/X2: 165mm/195mm, travel Z1/Z2: 700mm/720mm, bar passage: 51mm, speed: 6000rpm, tool positions: 2x12. Machine dimensions X/Y/Z: approx. 5100mm/2200mm/2500mm, weight: approx. 8200kg, control: Fanuc 31i-B, operating hours: 1407h, spindle hours: 343h. Includes transformer and chip conveyor. Documentation available. An on-site inspection is possible.
Specifications: Workspace: Max. circumferential diameter: 680 mm Circumferential diameter via X-guide: 565 mm Chuck diameter: 250 / 315 mm Plane stroke (X): 315 mm Longitudinal stroke (Y): 1350 mm Spindle box: Spindle diameter in the front bearing: 150 mm Spindle bore: 107 mm Main Drive: Power of the three-phase main drive: 36 / 45 kW Torque (100% ED / 40% ED): 600 / 750 Nm Speed range (100% ED): 20 - 3200 rpm Speed range (40% ED): 20 - 4000 rpm Tool carrier: Number of tool stations: 12 Cylindrical shank diameter: 50 mm Switching time 30°: 0.16 sec. Tailstock: Tailstock, travel: 1200 mm Quill stroke: 120 mm Quill diameter: 120 mm Quill holder: MK 5 Coolant Facility: Content: approx. 220 l Pump power: 1.7 kW Flow rate at 6 bar: 20 l/min Connected load: approx. 65 kVA Dimensions (LxWxH), approx.: 5560 x 2115 x 2050 mm Weight without chip conveyor, ...
turning length: 2000 mmcentre height: 330 mmswing diameter over bed slide: 660 mmswing diameter over slide rest: 460 mmturning dia. in gap: 900 mmspindle bore: 105 mmturning speeds: 25 - 1600 U/minbed width: 400 mmspindle taper: 55029 D 1-8taper in tailstock: 5 MKquill travel: 235 mmtotal power requirement: 7,5 kWweight of the machine ca.: 2900 kg.range L-W-H: 3630 x 1200 x 1520 mmScope of delivery :- 3-axis digital display ES-12 V with LCD display- Slip clutch- Rapid traverse longitudinally and flatly- LED machine light- 3-jaw chuck PS3-315 mm / D8- Clamping disk 450 mm- Fixed bezel - Passage diam. max. 180 mm- Revolving bezel - Passage diam. max. 120mm- 2 centering points- Motor with magnetic brake according to CE standards- Foot pedal with braking function according to CE- Initial filling with Shell Tellus 46- Coolant device- Quick-change tool holder with 4 inserts- Protective device ...
turning length: 3000 mmturning diameter: 660 mmturning dia. in gap: 900 mmturning diameter over slide: 460 mmturning speeds: 25 - 1600 U/minquill:: 5 MKquill travel: 235 mmspindle bore: 105,0 mmengine output: 7,5 kWspindle taper: DIN 55029 D 1-8weight of the machine ca.: 3.300 kg.dimensions: 4.630 x 1.200 x 1.529 mmScope of delivery- 3-axis digital display ES-12 V with LCD display- Slip clutch- Rapid traverse longitudinal and planar- LED machine light- 3-jaw steel chuck PO3-315 mm / D8- Clamping disk 450 mm- Fixed steady rest - passage diameter max. 180 mm- Follow-on steady rest - passage diameter max. 120 mm- 2 centering points- Motor with magnetic brake in accordance with CE standard- Foot pedal with brake function in accordance with CE- Initial filling with Shell Tellus 46- Coolant system- Quick-change tool holder with 4 inserts- Protective device for quick-change tool holder- Change ...
turning length: 1000 mmturning diameter: 460 mmswing diameter over bed slide: 270 mmturning dia. in gap: 690 mmspindle bore: 80.0 mmturning speeds: 25 - 1700 U/minbed width: 300 mmspindle taper: DIN 55029 D 1-8taper in tailstock: 4 MKquill travel: 130 mmtotal power requirement: 5.5 kWweight of the machine ca.: 1675 kg.range L-W-H: 2300 x 1080 x 1600 mmScope of delivery:- 3-axis digital display ES-12 V with LCD display- 3-jaw chuck PS3-250 mm / D8- Clamping disk 450 mm- Coolant system- Initial filling with Shell Tellus 46- Fixed steady rest - passage diameter max. 150 mm- Follow-on steady rest - passage diameter max. 110 mm- Quick-change tool holder with 4 inserts- Protective device for quick-change tool holder- Motor with magnetic brake according to CE standard- Foot pedal with brake function according to CE- Slip clutch- Rapid traverse lengthwise and facewise- Change gears- 2 centering ...
turning length: 500 mmturning diameter over bed: 297 mmturning diameter over slide rest: 160 mmspindle bore: 36.0 mmtool adaptor: DIN 55022 Gr. 5quill:: 3 MKquill travel: 90.0 mmturning speeds: 30 - 3550 U/minmotor speeds:: 1410 / 2830 U/mintotal power requirement: 3.3 kWvoltage: 380 Vweight of the machine ca.: 620 kg.range L-W-H: 1420 x 700 x 1200 mm from a vocational school - very good condition () regularly receive a WEILER factory service particularly suitable for medium-precision turned partsEquipment:- robust lead/pull spindle lathe- KLOPFER four-jaw chuck Ø 140 mm- KLOPFER three-jaw chuck Ø 140 mm- collet holder with lots of collets- foldable lathe chuck guard- chuck key- MULTIFIX steel holder A, with 3x new inserts- movable tailstock- adjustable bed stop- control panel, front left- automatic feeds for face and top support- pole-changing drive motor- machine base frame, with cab ...
turning length: 800 mmturning diameter: 280 mmturning diameter over slide rest: 150 mmspindle bore: 42.0 mmtailstock quill taper MT: 3 MKbed width: 208 mmturning speeds: 42 - 2022 U/minspindle taper: DIN 55027/5 quill stroke: 90.0 mmvoltage: 380 Vtotal power requirement: 3.0 kWweight of the machine ca.: 750 kgrange L-W-H: 1800 x 800 x 1250 mmDue to its design (type, performance, feed rates, etc.) it can be usedsuccessfully in training workshops, but also for toolmaking and repair shops.Equipment:- robust conventional lead/spindle lathe- WMW 3-jaw chuck Ø 150 mm- faceplate 280 mm- MULTIFIX quick-change holder, with insert- movable tailstock- chuck key- machine base with storage area- pole-changing drive motor- operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning length: 750 mmturning diameter: 310 mmturning diameter over slide rest: 175 mmspindle bore: 32.0 mmtailstock quill taper MT: 3 MKturning speeds: 85 - 2200 U/minbed width: 200 mmspindle taper: DIN 55027 GR 5 total power requirement: 2.2 kWweight of the machine ca.: 710 kgrange L-W-H: 1884 x 717 x 1262 mm New price ~ 20.000 euros from a technical college ()- in checked condition - machine videos -https://www.youtube.com/watch?v=iqU7Bkh6INohttps://www.youtube.com/wa tch?v=aSViqjk51IkFurnishing:- Robust conventional center lathe- 3-jaw lathe chuck Ø 160 mm, with replacement jaws- NEWALL digital display, front left- MULTIFIX steel holder with 4x inserts- fixed bezel- moving bezel- Movable tailstock- Foot/spindle brake- Machine swing feet- User manual (PDF/NL) all technical data:- Turning diameter over bed 310 mm- Distance between centers 750 mm- Turning diameter over support 175 mm- ...
turning length: 3000 mmturning diameter: 800 mmturning dia. in gap: 1000 mmturning diameter over slide: 540 mmturning speeds: 25 - 1600 U/minquill:: 5 MKquill travel: 235 mmspindle bore: 105,0 mmengine output: 7,5 kWspindle taper: DIN 55029 D 1-8weight of the machine ca.: 3820 kg.dimensions: 4800 x 1320 x 1580 mmScope of delivery- 3-axis digital display ES-12 V with LCD display- Cable routing via energy chain- 3-jaw chuck PS3-315 mm / D8- Clamping disc 500 mm- Fixed steady rest - passage diameter max. 180 mm- Follow-on steady rest - passage diameter max. 100 mm- 2 centering points- Motor with magnetic brake in accordance with CE standard- Foot pedal with brake function in accordance with CE- Initial filling with Shell Tellus 46- Rapid traverse lengthwise and facewise- Slip clutch- Coolant system- Quick-change tool holder with 4 inserts- Protective device for quick-change tool holder- LED ...
turning length: 500 mmturning diameter over bed: 297 mmturning diameter over slide rest: 160 mmspindle bore: 36.0 mmtool adaptor: DIN 55022 Gr. 5quill:: 3 MKquill travel: 90.0 mmturning speeds: 30 - 3550 U/minmotor speeds:: 1410 / 2830 U/mintotal power requirement: 3.3 kWvoltage: 380 Vweight of the machine ca.: 620 kg.range L-W-H: 1420 x 700 x 1200 mm from a vocational school - very good condition () regularly receive a WEILER factory service particularly suitable for medium-precision turned partsEquipment:- robust lead/pull spindle lathe- KLOPFER four-jaw chuck Ø 140 mm- collet holder with lots of collets- chuck key- MULTIFIX steel holder A, with 3x new inserts- movable tailstock- adjustable bed stop- control panel, front left- automatic feeds for face and top support- pole-changing drive motor- machine base frame, with cabinet door (storage area)- chip splash guard rear wallThe data f ...
turning length: 1000 mmturning diameter: 360 mmturning dia. in gap: 480 mmspindle bore: 51,0 mmturning speeds: 70 - 2000 U/minbed width: 185 mmspindle taper: 55029 D 1-5taper in tailstock: 4 MKquill travel: 110 mmtotal power requirement: 1,5 kWweight of the machine ca.: 540 kg.range L-W-H: 1920 x 750 x 1600 mmEquipment:- 3-axis digital display i200 with LCD display- 3-jaw chuck DK11-200 mm / D5- Faceplate 200 mm / D5, according to DIN 55029- Fixed steady rest - passage diameter max. 70 mm- Follow-on steady rest - passage diameter max. 50 mm- Coolant system- Initial filling with Shell Tellus 46- Extendable chip tray- Clamping disk 320 mm- Quadruple tool holder- Protective device for quadruple tool holder- Slip clutch- Micrometer longitudinal stop- Thread gauge- LED machine light- Reducing sleeve- Change gears- 2 centering points- Foot pedal with brake function according to CE- Motor with ...
