Manufacturer:
(Category: 102)
- Please note: not original pictures its only 3000 length not 5000 mm - 3 Guide way construction- 2 Axis HeidenHain Digital readout- Feed in 3 directions all tool post slide- Central lubrication - Work load flying in chuck 2500 Kg- Work load NOT supported 8500 Kg- Work load supported 10000 Kg - Optional 4 chuck ca 1200 mm- Optional 4 chuck ca 1500 mm- Optional package with 3 steady rest fixed model from to
- 3 chuck 1200 mm- Heidenhain Digital read out syhstem X / Z Axis- Feeds in 2 directions- Multi fix Tool systems with inserts
- X Stroke 1835 mm- Z Stroke 1000 mm- Table load 20 Ton- Ram size 230 x 230 mm - Stroke crossrail 800 mm - Stroke crossrail in 5 steps each 200 mm- Live tools 2000 Rpm- Power live tools 15 kW- ATC 18 station max L = 450 mm- Taper BT50 BIG PLUS- Full C-Axis 360.000 - Under power in AEROSPACE precision plant- 2020 Table bearing replaced- 2020 Ram bearing replaced- 2025 new chip conveyor
- Doubled support carriage- CNC controlled measuring and correction probe- Chip conveyor - internal and external clamping jaws (wheel clamp in and out)- overhauling cost 850k EUR- Under power free 02.2026
- C-Axis rapid traverve 400 Min- Turret indecing time 0,2 sec for 1 station- Heavy duty cutting (depth cut 6mm) 162.7 mL/Min- LNS Bar feeder new 2017- Large package tooling driven / live tools- 8 axis controlled with 2 spindles and turrets
- Chip conveyor - SMW Front and Rear chuck 700 mm - Double revolver 6+8 positions- Big Bore 360 mm- Tailstock with power quill- Tooling package included with inserts and jaws
- 4 Chuck 1400 mm- Steady rest 3 units Ø 100-1050- Roller steady open 2 units Ø 1120- KNOLL Chip conveyor 2022- Boring bar Ø 260 x 3500 mm- Boring bar Ø 200 x 1500 mm- Boring bar Ø 150 x 1100 mm
- Full C-Axis 360.000- Driven tools Axiaal & Radial - Driven tailstock- Steady rest C-Type- Front chuck with 180 bore- Rear chuck with 180 bore- 3 guide way bed width 750 mm
Inv. Num. : 8679 Type: VL 5S Producer: Emag Created: 2007 Parameters: Control system: Siemens 840 SL Feed length X-axis: 570 mm Feed length Z-axis: 200 mm Max. turning diameter: 220 mm Maximum workpiece weight: 120 kg Maximum spindle speed: 4500 1/min Max. workpiece height: 110 mm Weight: 6500 kg Equipment: Turret with Leiftool drive Chip conveyor
Inv. Num. : 8680 Type: VSC 250 DS Producer: Emag Created: 2007 Parameters: Control system: Siemens 840 SL Table diameter: 260 mm Feed length X-axis: 680 mm Feed length Z-axis: 200 mm Maximum turning length: 100 mm Max. turning diameter: 250 mm Maximum workpiece weight: 40 kg Motor power: 35 kW Length: 3800 mm Width: 2100 mm Height: 2400 mm Weight: 7500 kg Equipment: Chip conveyor
Horizontal CNC lathe with double spindle and two working spaces. Muratec MW 40 Year of Make: 2017 Original price: 260.000,- € net Current leasing rate: 2,678 € LNS FOX Spray Cabine, built in 2017 SPECIFICATIONS Machine Type: Lathe Front Spindle Construction: horizontal lathe Chuck size: 135 mm (5 inches) Number of spindles: 2 pieces Turret: 2 à 10 stations Spindle speed: 10,000 rpm Drive power: 3.7 / 2.2 kW
CNC Lathe Manufacturer: Gildemeister Type: CTX 420 linear V3 Year of Make: 2003 Control: Heidenhain Plus IT Circumferential diameter over bed: 680 mm Circumferential diameter over face slide: 565 mm Plan travel: 260 mm Longitudinal travel: 635 mm Drive power: 40/ 100% 25/37 kW Speed range from – to: 20 – 5000 rpm Weight approx.: 6500 Kg Equipment: Driven tools: 12 stations Tool carrier: 12-cavity Sauter revolver VDI 30 Partial hollow clamps Tailstock Quill stroke automatic Quill holder: Mk 5 Conveyor Measuring arm Oil mist extraction Errors excepted
Lathe Gildemeister CT60 Gear stages 2 Sauter Revolver 12 Tools 6x Powered Tools D=315 Chuck Forkardt (three-jaw chuck) Operating instructions and circuit diagrams are still available, various tool holders and various spare parts as well.
: 0400 mm: 246 mm: 1250 mm: 195 mm: 54 mm: 7,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A conventional center lathe is available. An on-site inspection is possible.
Key data: 2500 mm, 8000 mm
Poreba TZB-250 CNC Heavy Duty Modular Lathe Fanuc Oi-TF CNC Control with MPG Pendant (Retrofit 2015), 78.74” 4-Jaw Face Plate Type Chuck, 98.42” Swing Over Bed, 314.96” Maximum Turning Length, 125.98” Maximum Swing Over Gap, Spindle Speeds 0.5-1000 RPM, 4.13” Spindle Bore, 4-Way Tool Post, 35,275 Lbs. Approx. Weight Capacity (Unsupported), Power Tailstock, Open Steady Rest, 75 HP Spindle Motor, S/N 1132 070
Gurutzpe B1800/3 CNC Lathe Fanuc Oi-TD CNC Control, 52” Swing Over Bed, 372” Between Centers, 36” Cushman 4-Jaw Independent Chuck, 41” Swing Over Carraige, Spindle Speeds 1-300 RPM, 4.33” Spindle Bore, Sauter 4-Position Turret, 48,400 Lbs. Weight Capacity (Unsupported), 70,500 Lbs. Weight Capacity (2 Steadies), Hydraulic Tailstock, (3) Roller-Type Steady Rests, Full Length Scale on Z-Axis, Hennig Chip Conveyor [CNC Retrofit 2010]
Rafamet KCFB-320 Vertical Boring Mill 125.98” Table Diameter, 137.79” Max. Turning Diameter, (2) Swiveling Ram Heads, 39.4” Ram Stroke, +/- 30 Degrees Ram Swivel, 98.4” Height Under Rail, 0.8-40 RPM Table Speeds, 55,000 Lbs. Table Capacity, Pendant Controls, 2-Axis Quadra Check Digital Readouts, Side Head, Threading & Taper Turning, 75 HP Table Motor, S/N 126240
Rafamet KCFB-320 Vertical Boring Mill 125.98” Table Diameter, 137.79” Max. Turning Diameter, (2) Swiveling Ram Heads, 39.4” Ram Stroke, +/- 30 Degrees Ram Swivel, 98.4” Height Under Rail, 0.8-40 RPM Table Speeds, 55,000 Lbs. Table Capacity, Pendant Controls, 2-Axis Quadra Check Digital Readouts, Side Head, Threading & Taper Turning, 75 HP Table Motor, S/N 126240
Control FANUC 18i-TB Max. rod Ø 32 mm Max. headstock stroke 310 mm Spindle speed 350 - 7,000 1/min Max. rod Ø sub-spindle 32 mm Max. speed sub-spindle 350 - 7,000 1/min Number of tools that can be used: 21 Turning Tools Multiple Chisel Holders: 6 Driven tools for transverse machining: 3 Front side drilling tool: 4 Rear Reamer: 4 Back side machining: 4 Speed driven tools: 5,000 1/min Bar feeder FMB turbo 3-36
Key data: 300 mm
Lathe CNC turning center with 2 spindles Emco Hyperturn 45 Year of manufacture 2018 Switch-on hours: 25,386 h Ready for operation (automatic mode): 17,035 h Production operation: 8,619 h Original price: 270.000,- € net Current leasing rate: 2,629 € Chip conveyor Bürener SPE 63/12-225 Year of construction 2018 Bar loading magazine TOP Automazioni ETL8-50 12-speed tool turret Powered tools on both turrets Y-axis Automation with EMCO bar feeders, swivel loaders or gantry loaders EMCONNECT - Digital Process Assistant (Sinumerik ONE) WORKSPACE Travel in X/Y/Z 160 (150)/70/510 mm Max. bar passage 45 (51) mm Max. turning diameter 300 mm Circumferential diameter over bed 430 mm Rapid traverse speed X/Y/Z 30/15/45 m/min MAIN SPINDLE Max. speed 7000 rpm Max. drive power 15 kW Max. torque 100 Nm SUB-SPINDLE Max. speed 7000 rpm Max. drive power 15 kW Max. t ...
I am selling this machine. Plugged in, can be tested. We can send a video of the machine via WhatsApp. The machine is well equipped. Swing diameter over bed: 1250 mm Distance between centers: 5000 mm Swing diameter over support: 940 mm Spindle bore: 102 mm Max. workpiece weight in centers: 5000 kg Main electric motor power: 22 kW Machine dimensions LxWxH: 7860x1970x1460 mm Machine weight: 10 t
greates pass round over bed: 670 mmswing diameter over bed slide: 490 mmmax. turning diameter: 490 mmcontrol: SIEMENS - 840 D main spindle bore: 115 mmexternal spindle dia. in forward position: 160 mmCNC Turning- and Milling Center | HEYLIGENSTAEDT - HEYNUMAT 5 UK / 1500 equipped with a turret for driven tools as well as travelling lynette and tailstock.Additional equipment:- Centering points,- Jaw sets,- Clamping jaws,- 3 jaw chuck,A machine video from the production plant will be shared on request.The machine is in a well-maintained condition and can be inspected at any time under power.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: Heynumat 5 U | Heynumat 5-U | Heynumat 5 U 1500The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
greates pass round over bed: 960 mmswing diameter over bed slide: o: 860 / u: 730 mmturning diameter over bed slide: o: 860 / u: 400 control: SIEMENS - 840 D forward bearing diameter: 200 mmCNC Turning- and Milling Center | HEYLIGENSTAEDT - HEYNUMAT 24 UK-2 / 2000equipped with a turret for driven tools as well as tailstock.The machine is in a well-maintained condition andcan be inspected at any time under power.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: HEYNUMAT 24 UK | HEYNUMAT 24-UK | HEYNUMAT 24 UK 2 2000The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Mach4metal
