Manufacturer:
(Category: 102)
turning diameter: - mmturning length: - mmswing diameter over bed slide: - mmtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A defective spare parts donor of a Hitachi Seiki lathe including an IEMCA bar feeder is available. 1) CNC lathe Hitachi Seiki GT 20 S II, travel X/Z: 200mm/400mm, max. turning diameter: 210mm, max. swing diameter over bed: 380mm, max. bar diameter: 51mm, spindle bore: 59mm, speed: 5000rpm, tool stations: 10, rapid traverse: 20m/min. Machine dimensions X/Y/Z: approx. 2350mm/1950mm/1850mm, weight: approx. 4100kg. The capacitors for the power connection are defective. 2) Hydraulic bar feeder IEMCA TAL/AUTO 65/32, max. bar diameter: 65mm, max. bar length: 3200mm, machine dimensions X/Y/Z: approx. 4200mm/800mm/1200mm, weight: approx. 800kg. The lathe is sold exclusively as a defective spare parts donor. An on-site inspection is possible.
5-assige simultaanbewerking voor complexe werkstukken - Verplaatsing in de X-as: 615 mm - Verplaatsing in de Z-as: 1585 mm - Verplaatsing in de Y-as: 250 mm - Verplaatsing van de X2-as (onderste toren): 230 mm - Verplaatsing van de Z2-as (onderste toren): 1388 mm - Verplaatsing B-as: -30° gt; 210° Tweede spindel: spankopdiameter: 300 mm tweede spindelsnelheid: 4000 tpm Tweede spindelverplaatsing: 1574 mm boring van de tweede spindel: diameter 91 mm Vermogen op de tweede spindel: 26/22 kW Freesspindel: revolverkop met enkele spindel en automatische gereedschapswisselaar Maximale spindelsnelheid: 12.000 tpm maximaal spindelkoppel: 120 Nm Onderste geschutskoepel: 9-positie trommelrevolver Swing over bed: 760 mm Distance centre tot centre: 1519 mm Max longitudinal travel Z-axis: 1585 mm Max cross travel X-axis: 615 mm Spindle cone: A2-8 Dia of spindle bore: 112 mm Power on the s ...
The machine is in good technical condition; testing is possible by prior arrangement. 400 operating hours; condition comparable to a new machine. The lathe comes with accessories and is ready for immediate operation. Equipment: driven tools, chip conveyor, 20-bar high-pressure pump, 250mm hydraulic chuck, 12-station turret, modern FANUC i-Series CNC control, sets of soft jaws, bar feeder, regular maintenance history, and documentation.
Ref.nr. 00914 For sale is an OKUMA Soarer L270E CNC chuck lathe with the proven OKUMA OSP-U10L controller. The machine is suitable for versatile Turning operations in individual parts and series production and impresses with its robust design and the high reliability of the OKUMA control system. The machine is but the spindle should be restored. Manufacturer: Okuma Model Soarer L270E Year of manufacture 2001 Technical data: Control: OSP-U10L Turning length: 500 mm Circumferential diameter over bed: 530 mm Design: CNC chuck lathe Condition: Machine functional Spindle bearing in need of repair / should be replaced Condition OK
CNC VERTICAL LATHE YOUJI MODEL YV-800E + C, EQUIPPED WITH FANUC 18T CONTROLLER, AND ROTARY TOOLS. Technical specification: - max turning diameter 1000 mm - max turning diameter 900 mm - max turning height 800 mm Working movements: - x transverse movement - 50 / + 810 mm - z vertical movement 880 mm - x rapid movement 20 m / min - z rapid movement 20 m / min - feed rate 0.001-500 mm / rev - feed rate in manual operation ( JOG ) 0 - 1260 mm / min - x feed motor FANUC AC 3.7 kW - z feed motor FANUC AC 3.7 kW Spindle: - spindle motor FANUC AC Alpha P40, cont. / 30 min 18.5 / 22 Kw - spindle motor gearbox 2 ranges manufacturer ZF, Germany - revolutions 10 - 800 k / min - spindle head A2-11 - spindle bearing dia. 330 mm Tools: - 12-station turret VDI - external turning holder 32 mm - internal turning holder dia. 50 mm Rotating tools: - max revolutions / min 3800 k / m ...
sliding headstock CNC lathe, year 2017, CNC 31i model B. Used machine. More info & price on IndustrialBuyer.
A Mori Seiki CNC lathe is available. Swing diameter over bed/slide: 450mm/300mm, max. turning diameter: 160mm, turning length: 525mm, travel X/Z: 135mm/560mm, bar capacity: 42mm, spindle bore: 52mm, spindle nose: JIS A2-5, spindle speed: 5000rpm, power: 7.5kW, torque: 172Nm, tool stations: 12, tailstock taper: MK4, quill diameter: 75mm, quill stroke: 80mm, rapid traverse: 12m/min. Machine dimensions X/Y/Z: approx. 2500mm/1500mm/1700mm, weight: approx. 3250kg, control: Fanuc Series 15-T. Documentation available. An on-site inspection is possible.
A Traub CNC automatic lathe including a bar feeder and chip conveyor is offered. Max. bar diameter: 42mm, min./max. bar stock diameter: 12mm-42mm, turning diameter: 42mm, turning length: approx. 250mm, max. speed: 4000rpm, main spindle stroke: 100mm, main spindle feed force: 1600N, number of cutoff slides: 4, X-axis slide stroke: 60mm, cutoff slide working stroke: 33mm, cutoff slide feed force: 4kN, cutoff slide rapid traverse: 15m/min, cutoff slide feed rate: 2.5m/min, slide dimensions X/Y: 112mm/320mm, guide width: 30mm, turret slide X/Z-axis: approx. 80mm/245mm, rapid traverse X/Z: 15m/min/15m/min, feed force X/Z: approx. 3200N/9000N, tool stations: 8, tool holder diameter: 25.4mm, max. turret indexing time: approx. 0.9s, remnant part dimensions X/Y: 42mm/240mm, max. workpiece dimensions for back-side machining X/Y: 42mm/100mm, longitudinal stroke for back-side machining: approx. 115m ...
This 4-axis Hyundai Wia L2100SY turn-mill centre was manufactured in 2012. It features a maximum turning diameter of 335 mm and a turning length of 455 mm. The machine is equipped with a 12-station turret and a spindle speed of up to 4,500 rpm. If you are looking to get high-quality turning capabilities, consider the Hyundai Wia L2100SY machine we have for sale. Contact us for further details.
CNC PROFI CK6156 CNC turning center was built in 2015 in Poland by CNC PROFI. The machine has worked a small number of hours and is in very good technical condition. The CNC PROFI CK6156 is designed for precision machining of workpieces with a maximum diameter of 560 mm and length of 1000 mm. The turning process is performed fully automatically in the X and Z axes by means of a spindle and cutting tools taken from an 8-position turret. The spindle, driven by a high-powered motor, reaches a maximum speed of 1800 rpm. Stable support of the workpiece during turning is provided by a tailstock that increases the accuracy of the entire process. This is complemented by a SIEMENS CNC controller with an intuitive interface and access to many advanced functions. All this makes the offered CK6156 CNC turning center an excellent choice for the production of precise and repeatable parts used in ma ...
AFM TAE 45N CNC turning center was built in 2005 in Poland by Andrychowska Fabryka Maszyn S.A. The machine is designed for precision machining of workpieces with a maximum diameter of 390 mm and length of 1000 mm. It is distinguished by the use of many well-proven components, guaranteeing high accuracy and dimensional repeatability of the manufactured parts, even during many years of intensive use. These include e.g. the reliable spindle, which is driven by a high-powered motor and reaches a maximum speed of 4500 rpm. The SAUTER VDI40 12-position turret with driven tools, on the other hand, enables to perform several operations in one clamping, reducing production time and increasing efficiency. All this is complemented by a compact design that maintains high stability during operation and facilitates daily use and maintenance. The AFM TAE 45N is operated from an intelligent SIEMENS S ...
vertical turret lathe, year 2000, CNC 840 C. Used machine. More info & price on IndustrialBuyer.
Offered is a CNC lathe Traub. Number of spindles: 2, spindle height above floor: 1130mm, max. turning diameter: 36mm, max. bar diameter: 36mm, max. turning length: 100mm, max. main spindle speed: 6300rpm, max. counter spindle speed: 6300rpm, main spindle power: approx. 10.7kW, counter spindle power: approx. 10.7kW, drive power range: main spindle travel X/Z: 370mm/250mm, counter spindle travel X/Z: 370mm/250mm, tool turret: 12, turret travel X/Z: 50mm/100mm, Y-axis turret: +/-20mm, max. speed of driven tools: 6000rpm, front tool positions: 5, rear tool positions: 5, control: Traub TX 8i. Weight: approx. 4000kg, machine dimensions: X/Y/Z: approx. 3400mm/1300mm/1700mm. Documentation available. Inspection possible by arrangement.
Horizontal turning machine manufactured in 2006. This DMG GILDEMEISTER CTX 310 features a maximum spindle speed of 6000 rpm and a tool turret with 12 stations. With a power capacity of 24 kVA, this machine is designed for efficient performance. If you are looking to get high-quality turning capabilities, consider the DMG GILDEMEISTER CTX 310 machine we have for sale. Contact us for further details.
This 4-axis HAAS DS30Y horizontal turning machine was manufactured in 2023. It features a maximum part swing of 533 mm and a maximum cutting diameter of 349 mm. The machine is equipped with a robust turret that accommodates 12 tools, ensuring versatility in operations. If you are looking to get high-quality turning capabilities, consider the HAAS DS30Y machine we have for sale. Contact us for further details.
control: FANUC 18i TB turning diameter: 280 mmturning length: 400 mmc-axis: indexing: 0.001 °turning speeds: -6000 U/mintool taper: DIN ASA A2-5 Top turret tool hodler:: 12 rapid traverse X-axis: 24 m/minrapid traverse Z-axis: 30 m/minOverall size: 5000 x 2000 x 2600 mmweight of the machine ca.: 6300 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
control: FANUC 0i TC turning diameter: 520 mmturning length: 1090 mmturning speeds: -3500 U/minTop turret tool hodler:: 12 rapid traverse X-axis: 20 m/minrapid traverse Z-axis: 24 m/minOverall size: 3000 x 1800 x 2000 mmweight of the machine ca.: 6 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
control: FANUC 21i TB turning diameter: 355 mmturning length: 1330 mmc-axis: indexing: 0.001 °turning speeds: -2800 U/mintool taper: BMT 65 Top turret tool hodler:: 12 rapid traverse X-axis: 16 m/minrapid traverse Z-axis: 24 m/minOverall size: 4000 x 2000 x 2100 mmweight of the machine ca.: 6700 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
TRAUB TNC 42/65 CNC Lathe TECHNICAL FEATURES: Year: 2009 NC Type: TRAUB TX8i Number of axes: 8 Y-axis travel: +/- 35 [mm] Z1 axle stroke: 450 [mm] X1 axis stroke: 140 [mm] Z2 axis stroke: 520 [mm] X2 axle stroke: 140 [mm] E-axis stroke: 450 [mm] Spindle Bore: 42 [mm] Maximum speed Spindle: 5600 [rpm] C-axis indexing accuracy: 0.001 [°] Spindle power: 18.5 [kW] Counter-spindle bore diameter: 42 [mm] Maximum speed Spindle: 5600 [RPM] C-axis sub-spindle indexing accuracy: 0.001 [°] Spindle power: 11 [kW] Toolholder type: VDI 30 Number of positions - Turret 1 : 14 Number of motorized stations - Turret 1 : 14 Maximum speed Rotating Tools - Turret 1: 4000 [RPM] Number of positions - Turret 2: 14 Number of motorized stations - Turret 2: 14 Maximum speed Rotating Tools - Turret 2: 4000 [RPM] Installed power: 107 [kVA] Rated Current: 85 [A] Supply voltage: 400 [V ...
sliding headstock CNC lathe, year 2014, CNC 840D. Used machine. More info & price on IndustrialBuyer.
control: GE Fanuc Series 21i-T Distance between centres: 5000 mmcenter bore: 425 swing over bed: 850 mmbed width: 425 mmrapid feed: 10000 mm/minworking feed: 7000 mm/minmain spindle bore: 85 mmMain spindle: DIN 55027-n°8 taper: 5 spindle speeds: 0-2000 U/minSpindle power: 11 KWtailstock quill diameter: 96 mmtailstock travel: 215 mmweight of the machine ca.: 7 tdimensions of the machine ca.: 7.300x1.700x1.900 mSupport Guides 2Swing over cross carriage 560 mm.Automatic ranges 2Turret type AutomaticTurret positions 8Hydraulic tailstock quill stroke INCLUDEDTailstock taper MORSE 63 Jaw Auto-centering hydraulic chuck Ø 300 mm. INCLUDED4 support steady rest Ø 450 mm. INCLUDED3 support steady rest Ø 250 mm INCLUDEDChuck protection INCLUDEDComplete rear protection INCLUDEDDual handwheel for carriage control INCLUDEDFoot pedals for hydraulic chuck opera ...
This 3-axis HAAS SL 30TBHE was manufactured in 2007. It features a maximum turning diameter of 406 mm and a maximum turning length of 864 mm. The machine is equipped with a chuck diameter of 315 mm and a spindle bore of 103 mm. If you are looking to get high-quality turning capabilities, consider the HAAS SL 30TBHE CNC lathe we have for sale. Contact us for further details.
This 4-axis HAAS DS30Y horizontal turning machine was manufactured in 2023. It features a maximum part swing of 533 mm and a maximum cutting diameter of 349 mm. The machine is equipped with a robust turret that accommodates 12 tools and offers a maximum cutting length of 826 mm. If you are looking to get high-quality turning capabilities, consider the HAAS DS30Y machine we have for sale. Contact us for further details regarding this machine.
Key data: 700 mm, 7000 mm
Inv. Num. : 9290 Type: LHDS Producer: LIEBER Created: 1992 Parameters: Maximum turning length: 7000 mm Maximum turning diameter over bed: 700 mm Lathe chuck diameter: 400 mm Equipment: 3x self-centering bezel Milling head Support Tip Tool Holder
A relatively lightly used Traub CNC universal lathe is available. Spindle clearance: 82mm, max. chuck diameter: 315mm, turning length: 750mm, travel X/Z: 360mm/750mm, rapid traverse: 20m/min. Machine dimensions X/Y/Z: approx. 3250mm/1900mm/2300mm, weight: approx. 7800kg, operating hours: approx. 21812h. Turning-only machine without live tooling. Documentation available. An on-site inspection is possible.
Top slide, top slide, dovetail guide, tool slide, cross table, support slide, support beam, tool clamp, tool holder, tool mount, centering clamp -Tool clamp: Centering clamp, tool holder -Hole: Ø 58 mm -Dimensions: see photos -Dimensions: Ø 125 x 125 mm -Weight: 5.7 kg
Horizontal turning machine manufactured in 2007. This Johnford SL-40 features a maximum bar diameter of Ø76.5 mm and an impressive X-axis travel of 240 mm, along with a Z-axis travel of 600 mm. It includes a 3-jaw chuck with a diameter of 254 mm and a hydraulic tailstock with a travel of 500 mm. If you are looking to get high-quality turning capabilities, consider the Johnford SL-40 machine we have for sale. Contact us for further details.
This 8-axis DMG MORI Sprint 65 linear was manufactured in 2015. It features a maximum workpiece diameter of 175 mm and a maximum bar diameter of 65 mm. The machine is equipped with two turrets, each with 12 driven tool positions, and offers a maximum spindle speed of 5000 rpm. If you are looking to get high-quality turning capabilities, consider the DMG MORI Sprint 65 linear multi-spindle turning machine we have for sale. The machine comes with a large and valuable set of spare parts and components. Contact us for further details.
This 6-axis Okuma MacTurn350-W was manufactured in 2003. It features a Z-axis travel of 2000 mm and a spindle speed of 12,000 RPM. The machine is equipped with an automatic tool changer that holds 44 tools and is ready for robotic integration. If you are looking to get high-quality turning and milling capabilities, consider the Okuma MacTurn350-W turn-mill centre we have for sale. Contact us for further details.
