boring mills, machining centers used for sale (552)

Quick-release chuck 0-13mm Precision quick-release chuck with MK 2 mount Quick-release chuck 0-13mm DKC 13 0-13mm B16 up to 4800 rpm G&-5193-M1250 Drill Chuck G&-5194-M1250 MK2 Mounts

Universally applicable frame dowel and slotted hole drilling machine with angle adjustment Especially for staircase construction, window construction and universal use through pneumatic height adjustment Angled dowels and picket drilling are easy to implement thanks to the rotatable drilling unit. Motor pole-switchable, two speeds Motor power 1.0 / 1.5 kW, 1400 and 2800 rpm Start of the motor with practical handle switch With two-jaw chuck 1 - 20mm from Röhm Linear laser for exact positioning of the workpiece Drilling unit can be rotated 65 degrees to the left and right Pneumatic adjustment of the processing height, dowels on two levels without changing. The desired drilling heights can be set for each drilling level with a digital counter, the changeover then takes place pneumatically from the front Transverse adjustment 340mm, infinitely variable or in 12mm increments, w ...

bore capacity in steel (diameter): . mmthroat: . mmbore stroke: . mmThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): . mmthroat: . mmbore stroke: . mmThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): . mmthroat: . mmbore stroke: . mmThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): . mmthroat: . mmbore stroke: . mmThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bore diameter: , mmNumber of heads horizontal: , St.Number of heads vertical: , St.2 pcs. Götzinger drilling and milling centers----------------------------------------For sale on behalf of a customer!2 identical machines:One machine for left parts and one for right parts.The machines can also be used individually.The machines were controlled via window manufacturing software, but can also be operated via the machine software.Both machines are equipped identically:- Left and right drilling units for front-end drilling.- 3 units for drilling and milling for longitudinal machining.- Parts are loaded once, and the unit carrier then moves for the various machining operations.Installation length per machine approx. 6 m.Individual sale possible:Price per machine 10,000 EuroSee the enclosed PDFs for more information.The data for this ad was created with ModulMWS - the software solution of Logo ...

Kolmag brand machining center Woodworking machines Model T35 Serial number K3426 Year of construction 2020 The machine does not have all accident prevention documentation (EC declaration of conformity, use and maintenance manual). Operation not verified as it is disconnected from the electrical voltage. ASSET INTENDED FOR SECTOR TRADERS, AFFILIATED OUTSOURCERS, MANUFACTURERS AND SCRAP DEALERS.

1 used SPM 2 panel cutting machine from HUNDEGGER with full equipment, plate size 2600 x 6000 mm, plate thickness up to 60 mm, year of construction early 2017, Cambium control. Available from approx. Jan / Feb. 2026. Plant ready for demonstration by arrangement. Sale as seen from the location. More details on your request.

x-travel: 1700 mmy-travel: 400 mmz-travel: 400 mmtable surface area: 2x 1100 x 420 mmtable load: 500 Kgtool taper: SK 40 control: Sinumerik 810 D Siemens turning speed range - spindle: 30 - 6000 U/mintool piece magazine with: 20 Plätzen Working speed: 1 - 30000 mm/minrapid traverse x / y / z axis: 30 / 30 / 30 m/mintotal power requirement: 20 kWweight of the machine ca.: 5 tdimensions of the machine ca.: 3,8 x 2,8 x 3,1 mMachine still in the delivery factory: Condition: Not more under power: Electric 380 Volt: Chip conveyor: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40.0 mmthroat: 293 mmbore stroke: 120 mmmorse taper: 3 MKtable:: 515 x 360 mmturning speeds: 160 - 2250 U/mincolumn diameter: 115 mmfeed: 0.10 + 0.20 mm/Udistance spindle /table: 117 / 701 mmtotal power requirement: 1.45 / 1.90 kWweight: 285 kgrange L-W-H: 500 x 800 x 1840 mmFurnishing:- autom. Feed 0.10 + 0.20 mm / rev- stepless speed adjustment- Short spindle MK 3- Mushroom pushbutton (latching) for EMERGENCY STOP- Reversing switch for clockwise and counterclockwise rotation- Digital speed display- Feed overload protection- Spindle protection with electrical fuse- 2 m cable with plug 16A- Operating instructions in Germanincluding special equipment:- Coolant device B pos. 25.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 28,0 mmthreading: 12 Mbore stroke: 130 mmthroat: 250 mmtable:: 375 x 375 mmmorse taper: 3 MKturning speeds: 75 - 3.200 U/mintotal power requirement: 1,1 / 1,5 kWweight of the machine ca.: 215 kg.range L-W-H: 450 x 600 x 2.020 mmDescription :- 12 switchable speeds thanks to the powerful 2-stage motor- Direction of rotation switch for clockwise and counterclockwise rotation for thread cutting- Solid work table (rotatable 360 °), swiveling from -45 ° to + 45 °- Machined machine base for clamping particularly high workpieces- Quality ball bearings ensure high concentricity- Easy tool change thanks to the automatic tool ejector- Adjustable drilling depth stop, drilling depth can be read off using a scale- Stable and polished steel column, designed for heavy use- Very smooth running thanks to ground gears in the gearbox- High level of safety thanks to th ...

bore capacity in steel (diameter): 50.0 mmthroat: 370 mmbore stroke: 250 mmmorse taper: 4 MKtable:: 600 x 500 mmthreading: M 42 Stahlturning speeds: 40 - 2100 U/minfeed: 0.1 - 0.4 mm/Ucolumn diameter: 200 mmdistance spindle /table: max. 600 mmdistance spindle/base plate: max. 1190 mmtotal power requirement: 2.2 / 2.8 kWweight: 670 kgrange L-W-H: 1020 x 750 x 2340 mmScope of delivery- Keyed drill chuck 1 - 13 mm / B 16- Drill chuck arbor MK 4 / B 16- Reducing sleeve MK 4 / 3, MK 4 / 2- Motorized table stroke- Coolant device- Electromagnetic spindle feed- Thread cutting device- Automatic tool ejector- LED machine light- Initial filling with Shell Tellus 46- Digital speed display- Digital drilling depth display- Height-adjustable protective coverThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 50.0 mmthroat: 360 mmbore stroke: 225 mmmorse taper: 4 MKtable:: 570 x 480 mmthreading: M 42 Stahlturning speeds: 50-316 / 316-2200 U/minfeed: 0.08 - 0.50 mm/Ucolumn diameter: 180 mmdistance spindle /table: max. 580 mmdistance spindle/base plate: max. 1185 mmtotal power requirement: 3.0 kWweight: 630 kgrange L-W-H: 1020 x 750 x 2340 mmScope of delivery- Keyed drill chuck 1 - 13 mm / B 16- Drill chuck arbor MK 4 / B 16- Reducing sleeve MK 4 / 3, MK 4 / 2, MK 3 / 1- Motorized table stroke- Coolant device- Touchscreen- Automatic tool ejector- Electromagnetic spindle feed- Thread cutting device- Initial filling with Shell Tellus 46- LED machine light- Digital speed display- Digital drilling depth display- Height-adjustable protective coverThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32,0 mmthroat: 230 mmbore stroke: 120 mmmorse taper: 3 MKtable:: 400x320 mmturning speeds: 105 - 1725 U/mintotal power requirement: 1,2 kWweight: 245 kgrange L-W-H: 470x810x1710 mmFurnishing:- Compact, stable cast iron construction in a modern design- Infinitely variable speed control- is changed The speed is read on a digital display- Table height adjustment via rack and crank- Right and left rotation of the quill for thread cutting- Powerful 2-stage motor, speed range from 105 - 1725 rpm- Base plate with T-slots for clamping high workpieces- Safety switch with undervoltage release- The spindle runs in the precision ball bearingscope of delivery- Key chuck 1 - 13 mm / B 16- Drill chuck arbor MK 3 / B 16- Reducing sleeve MK 3/2- Digital speed display- LED machine light- Height-adjustable protective coverThe data for this ad was created with ModulMWS - t ...

bore capacity in steel (diameter): 50.0 mmthroat: 300 mmbore stroke: 160 mmthreading: M 30 turning speeds: 100 - 1600 U/mintable:: 615 x 430 mmbore spindles - Morse Taper: 4 Kurzspindel MKcolumn diameter: 145 mmfeed: 0.1-0.2-0.3-0.4 mm/Udistance spindle /table: 147 / 688 mmengine output: 1.8 / 2.9 kWweight: 450 kgMachine height: 1865 mmFurnishing :- automatic feed with electromagn. Feed clutch- 4 feed rates 0.1-0.2-0.3-0.4 mm / rev- stepless speed adjustment- digital speed display- Feed overload protection- Spindle protection with electr. validation- digital speed display- machined base plate- Motor 1.8 / 2.9 KW - 100 - 1600 rpm.Special accessories included:- LED machine light pos. 12.- Thread cutting device pos. 20.0 (Thread cutting with stop)- Coolant device A pos. 24. (Coolant base plate, complete)- digital drilling depth display pos. 37.1 (5-digit LED display)The data for this ad  ...

bore capacity in steel (diameter): mmthroat: 290 mmbore stroke: 180 mmtotal power requirement: 1,9 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 30.0 mmthroat: 293 mmbore stroke: 140 mmmorse taper: 3 MKtable:: 515 x 360 mmturning speeds: 225 - 4300 U/minengine output: 1.0 / 1.6 kWcolumn diameter: 115 mmdistance spindle /table: 132 / 724 mmweight: 260 kgMachine height: 1790 mmFurnishing:- stepless speed adjustment- Reversing switch for R / L run- digital speed display- Connector and cable mounted- Spindle protection with electr. validation- 2 mtr. Connection cable with plug 16AThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 23.0 mmthroat: 250 mmbore stroke: 100 mmmorse taper: 2 MKtable:: 370 x 300 mmturning speeds: 225 - 4300 U/mincolumn diameter: 90.0 mmdistance spindle /table: 140 / 670 mmengine output: 0.6 / 0.95 kWweight: 175 kgMachine height: 1770 mmFurnishing :- Mushroom pushbutton (latching) for EMERGENCY STOP- Reversing switch for clockwise and counterclockwise rotation- Motor protection switch- Infinitely variable speed adjustment- Digital speed display- Protection class IP 54- Connection plug (fully assembled, cable length 2m)- Spindle protection with electrical fuse- Painting: DD textured paint, light gray RAL 7035, anthracite RAL 7016The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 35,0 mmbore capacity in cast iron: 40,0 mmthroat: 320 mmthreading: M 24 in Stahlmorse taper: 4 MKbore stroke: 160 mmturning speeds: 65 - 3250 U/mintable:: 500 x 420 mmthroat: 320 mmweight: 375 kgrange L-W-H: 600 x 870 x 2.170 mmFurnishing:- Infinitely variable speed, ideal for- Set the desired cutting speed.- Automatic tool ejector and thread cutting device as standard- Electromechanical drilling feed, adjustable from 0.1 - 0.3 mm / rev- Solid gray cast iron table with rotating and swiveling support surface- T-slots in the machine base enable high workpieces to be clamped- Guaranteed concentricity 0.02 mm, measured in the quill- Hardened and ground gears ensure smooth running- Adjustable drilling depth stop with an easily readable scaleScope of delivery:- Key chuck 1 - 13 mm / B 16- Drill chuck arbor MK 4 / B 16- Reducing sleeve MT 4/3, MT 4/2- coolant  ...

bore capacity in steel (diameter): 60.0 mmthreading: M 42 throat: 350 mmbore stroke: 200 mmturning speeds: 60 - 1530 U/mintable:: 720 x 510 mmbore spindles - Morse Taper: 4 Kurzspindel MKcolumn diameter: 200 mmfeed: 0.15-0.2-0.3-0.36 mm/Udistance spindle /table: 159 / 884 mmengine output: 3.6 / 4.3 kWweight: 605 kgMachine height: 1950 mmFurnishing :- automatic feed with electromagn. Feed clutch- 4 feed levels 0.15 / 02, - 0.3 - 0.36 mm / rev- stepless speed adjustment- digital speed display- Feed overload protection- Spindle protection with electr. validation- digital speed display- machined base plateincluding special equipment:- Coolant device mounted in the foot pos. 24.- Thread cutting device pos. 20.0- LED machine light pos. 12.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 55.0 mmthreading: M 30 / M 42 throat: 300 mmbore stroke: 140 mmturning speeds: 70 - 1200 U/mintable:: 615 x 430 mmbore spindles - Morse Taper: 4 Kurzspindel MKcolumn diameter: 145 mmfeed: 0.10 + 0.30 mm/Udistance spindle /table: 150 / 735 mmweight: 380 kgMachine height: 1850 mmFurnishing :- automatic feed- Feed device 0.1 + 0.3 mm / rev- stepless speed adjustment- digital speed display- Feed overload protection- Spindle protection with electr. validationincluding special equipment:- Coolant device mounted in the foot pos. 24.- Thread cutting device pos. 20.0 (Thread cutting with stop)- LED machine light pos. 12.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hundegger K2i 625 well-maintained year of manufacture end of 2008 fully automatic carpentry machine, feed and loading cross conveyor, under-table swivel cross-cut saw 11 kw, universal milling unit - 5 axis, combined support for vertically working tools, drilling rig 2.2 kw, drilling rig swivel 2.2 kw, marking device, fully automatic beam turning station hydraulic design, transport and position setup two-hand system, electronic control, 6-arm storage table, AQF strand with shaft extension, Extension bracket with puller, zero stop for pre-elongated components, scrap wood holder on the K2 i in front of the sawing unit, splinter wood for horizontal drilling unit, vertical finger cutter 5.5 kw, longitudinal and transverse groove cutter, slitting device on both sides guide 900mm, marking device at the rear, marking and labeling device at the bottom, refined wood support surfaces, additional s ...

gebr. Slotted Hole Drilling Machine GANNER GANNOMAT Junior LBM 320 Drilling on 2 levels YOC 1992 Motor power: 1.5 kW (380V / 16A plug) Rated current: 3.4 A Spindle speed: 3,000 rpm Pneumatic height adjustment: 150 mm Clamping height of the workpieces: max. 250 mm Working height: 850 mm Dowel pitch: 12 mm 2-lever operation 2 pneum. Workpiece clamp 3 plug-in stops (2x 90°, 1 x mitre stop) Compressed air connection: 6 bar Weight: 270 kg Floor space: 1,200 mm x 1,000 mm Technical data according to manufacturer's specifications.

bore capacity in steel (diameter): mmthroat: 290 mmbore stroke: 160 mmtotal power requirement: 1,9 kWweight of the machine ca.: tdimensions of the machine ca.: mDescription to follow!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mmthroat: 290 mmbore stroke: 180 mmtotal power requirement: 1,9 kWweight of the machine ca.: tdimensions of the machine ca.: mDescription to follow!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Code: 0190 Brand: MASTERWOOD Model: PROJECT TF 100 - CE Standard CNC point to point throughfeed boring machine for panels, furniture, custom-made furniture, kitchens, bathroom furniture, carpentries and various - CE Standard Features: Robust clamping device for panel translation running on linear guides with preloaded ball bearings and moving by means of ball screw with high precision and stiffness. Brushless motor Working table: table with idle rubber wheels for panels in and outfeed . Panel movement on air film to avoid any scratching of panels with delicate surfaces . Panel pusher for smooth and accurate movement. Longitudinal sinking reference stop. Automatic reading of panel length Operating unit: boring head with vertical and horizontal spindles plus grooving saw unit. Centralised chips suction outlet Numeric control with PC: Windows operating system - network conn ...

Code: 0187 Brand: MASTERWOOD - ZANGHERI E BOSCHETTI Model: LIGNA 3-group multiple boring machine for carpentry, furniture, custom-made furnishings, panels and various Technical data: 1 horizontal boring unit with 21 spindles 1 vertical boring unit with 2 transverse heads with 21 adjustable spindles that can also be positioned longitudinally Steel guide with millimetre scale and 32 pitch scale for positioning stops and pneumatic pressers Spindle centre distance 32 mm Threaded drill bit attachment 2 pneumatic pressers that can be positioned to lock the panel Max panel thickness 90 mm Horizontal boring depth 85 mm Motor power Hp 2,5 Operating pressure 6-8 atm Overall dimensions mm 1850 x 1200 x 1600 h Weight kg 630

1 used WEINMANN Gebertisch, built in 2022, as good as new, For now.. without control, as this remains in the overall production control. Control is about 6000 euros new from Weinmann. Size 12 x 3 m - Model BuildteQ A 570.. Sale as seen from site without warranty, dismantling is helped with overhead crane and forklift free of charge without warranty.

Olive and pot belt drilling machine Ganner for windows Type 370 Machine No. 190469 Built in 1994 Combined Corner Bearing and Olive Drilling Machine Drill head with 3 drill bits Motor power 0.75 kW 2800 rpm Compressed air connection 5 – 7 bar Suction nozzle diameter 100 mm Well functioning condition Dimensions approx. 2700 x 900 x 1400 mm Weight approx. 250 kg