used Slotted hole drill presses for sale

docisk pneumatyczny regulacja zakresu oscylacji regulacja stołu góra/dół regulacja kąta stołu korpus odlewany zasilanie 380V

double-sided long-hole drilling machine with automatic duty cycle, maximum working width / stroke length of oscillation 120 mm, drilling depth max. 80 mm, table inclination max. 20°, tool clamping diameter max. 13 mm, drilling diameter max. 20 mm, spindle motor power 2.24 KW / volt. 380/50 Hz, spindle speed 9,000 rpm, oscillating motor power 0.75 KW, oscillation adjustable from 120 - 240 strokes per minute, pneumatic workpiece clamping, 4 suction nozzles D=80 mm, space requirement - depth 1,000 mm, width 1,300 mm, height 1250 mm, weight 500 KG; Technically and optically in very good condition

Motor with long hole drill Chuck Röhm up to 20 mm wingspan 1.5 KW 2800 RPM 400 V

Description: machine number 367962, motor approx. 1.5 kW, length stops, drilling unit with grid division for grid drilling, table length approx. 870 mm, accessories drill, pneumatic material clamping, mounted on trolleydimensions (l x w x h) approx.: 1,400 x 1,100 x 1,500 mm, weight approx.: 250 kg

Power consumption 2 .2kW 380V Double jigs with opposite drilling shots 2 cutting speeds Automatic mode for start milling 2 x pneumatic tensioner Table height adjustment by Handwheel

HOFMANN LB760 built in 1998 Motor power: 1.3 / 1.8 kW 2 speeds: 1,500 + 3,000 rpm. Table size: 35 x 76 cm Table height: 91 cm max. drilling depth: 150 mm max. height adjustment: 150 mm Transverse adjustment: 300 mm 2-lever operation Dowel grid (16 / 22 / 25 / 32 mm) Height adjustment by handwheel Display of the height via counter 2 eccentric. Workpiece clamps Angle stop fixed 90° Double angle adjustment stop (variable angle adjustment from 22.5° - 75°) Tension bridge with flat clamp and cross stop at the top for upright drilling Collet chuck incl. 2 collets: 12mm + 16 mm Driving device Chip trap hopper Suction connection: 120 mm Weight: approx. 300 kg

HofmannLangloch drill Brand Hofmann Type LL150 Year of construction Specifications: drilling depth max. 145 mm (drill head movement) Drilling length: max. 230 mm (table movement) Vertical drilling spindell run max.135 mm Drilling: Drilling depth limitation Table: side ward movement via sep. Handle Cast iron table: solid with mechanical product clamp Height adjustment: Handwheel Motor power 1.3 kW Chuck 5 - 20 mm Condition: functionally tested

Description: Work table dimensions 700 x 400 mm , Drilling width 250 mm , Drilling depth 150 mm , Max. Travel 340 mm , Drill head height adjustment 200 mm , Table rotatable - ± 45° - , Wescott drill chuck 0 - 20 mmmain motor: 2.2 kW, material clamping: Exzenterspanner, dimensions (l x w x h) approx.: 900 x 1,100 x 1,500 mm, weight approx.: 350 kg

max. milling width approx. 240 mm max. milling depth approx. 160 mm max. working height approx. 120 mm Table dimensions approx. 460 x 220 mm Motor 1.1 kW, unbraked Table height adjustment by handwheel 2 pcs workpiece clamps Stop rods for milling width limitation are missing Milling tools as shown in photos

Long-hole drilling machine Klein und Söhne Type LRAE Height and depth adjustment of the drilling support by hand wheel Depth and side movement of the table by hand lever Table size 785 mm x 255 mm Chuck 20 mm Speeds 2900/5600/7000 rpm. Motor power 1.5 kW With driving equipment

New VDL 2D chiseling machine with the possibility of automatic drilling at distances of 25 and 32 with the possibility of tilting and turning in 2 directions. Technical parameters: Control of the machine with 1 lever Power of the main motor: 1.5 kW Tool speed: 2850 rpm Spindle diameter: 3 - 16 mm Stroke of the spindle: 180 mm Dimensions of the table: 600 x 450 mm Weight of the machine: 320 kg

Precise and heavy machine for drilling slotted holes. The maximum hole length is optional. In the standard version, it is 400 mm. The tool is fixed. The height is adjusted by raising the work table. Spindle power: 1.5 or 2.2 kW

Description: Controlled anuba boring machine With 3200 mm working table 15 mm anubating machinedimensions (l x w x h) approx.: 3,500 x 1,700 x 1,500 mm, weight approx.: 1,200 kg

MELCO Milano LLB20 Slotted hole drilling machine Longitudinal stop Transverse stop Transverse adjustment 220mm Drilling depth 140mm Height adjustment 170mm with dowel drilling device with pitch 16/22/25/32 1,5kW 400V 50Hz Year of construction: 2008 Weight 160kg Driving device Wescott drill chuck max. drill bit holder D = 16mm Drilling table L=530mm W=230mm G&-5035-M32Ko

pneumatic clamps automatic strip feeding adjustment of the aggregate angle pneumatic spindle movement slatted supports regulation of oscillating motion of drills feed stroke adjustment power supply 380V

two worktops measuring 440x220mm pneumatic pressure oscillation range adjustment table adjustment up/down table angle adjustment possibility of drilling without oscillation pneumatic feed 380V power supply

4 aggregates 6 clamps pneumatic pressure adjustment of the range of oscillations up/down drilling height adjustment regulation of aggregates right/left possibility of drilling without oscillation Ce total power 13 kW year 1995

Long-hole drilling machine Panhans Type: 116 Year of construction: 1983 Table with pneumatic tensioner Drilling unit moves right-left-forward-back by lever

Panhans 116 - 351 Brand Panhans: Type 116 Table dimensions 700 x 380 mm - fixed table made of cast iron Table height approx. 800 mm drilling length 240 mm Vertical drilling spinel run 135 mm drilling depth 145 mm Chuck 5 -20 mm, 3-fold chuck Rotary line 1,500 / 3,000 rpm Engine power 1.3 kW / 1.8 PS Weight 200 kG Fixed table and X,Y,Z Adjustable, moving drill head Condition: Fully functional Prijs: € 2.500,00 EXW Handelaarsprijs € 1.500,00 EXW

Table top height: 910 mm Table top size: 700 x 380 mm Max drilling depth: 145 mm Max long hole length: 240 mm Height adjustment distance 135 mm Engine power: 1.5 kW Voltage: 400 V / 50 Hz Speed: 3,000 rpm Net weight: approx. 200 kg Suction nozzle: 100 mm Dm Dowel drilling device: Pitch 16, 22, 25, 32 mm with precision grid roller Driving equipment: Yes Frame stop 90°: pluggable Two-jaw chuck: up to 20 mm clamping range Hand eccentric tensioner: 1 piece 1 Lever control: Yes Measuring clock in handwheel: Yes Miter stop: Yes, double angle adjustment stop from 22.5° to 75° infinitely adjustable

-) 2-jaw drill chuck 20 mm -) Dowel drilling device with 4-compartment grid 16-32-22-25 mm -) 90° frame stop pluggable -) Miter stop 45° and 22.5° pluggable -) Moving equipment -) Workpiece clamp manual 2 pieces -) Suction connection D 100 mm Optional accessory: -) Gauge in handwheel -) infinitely variable double angle miter stop -) 1 lever operation -) switchable pneumatic stroke for two planes -) Leaser on request

Slot boring machine SCM Mobile Two-lever operation L x W x H: 80 x 80 x 120 cm Weight approx. 480 kg Built in 1984 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Description: Cross travel of the table: 500mm - Longitudinal travel of the table: 520mm - Distance between the tool and the column: 510mm - Maximum height between the table and the column: 540mm - Table rotation: 360° - Tilting head: 30° - Slide speeds: 28-50-80-105strokes/mn - Number of slide speeds: 4 - Motor: 3hp - Approximate weight: 1500kg - Overall dimensions: 1970x1020x1900mm Machine loaded by overhead cranedimensions (l x w x h) approx.: 1,970 x 1,020 x 1,900 mm, weight approx.: 1,500 kg

mobile, with 2 hand clamps for workpiece clamping

Connection value 380V Current consumption 3.2 A Handwheel table adjustment Hand lever side adjustment Hand lever depth adjustment Hand-held clamping plate 2-jaw food Table size 500 x 300 mm Deep stop Side stop

Long-hole drilling machine Height adjustment of the drilling support by hand wheel Deep movement of the drilling support by hand lever Lateral movement of the table by hand lever Table size 690 mm x 300 mm Chuck 3-16 mm Maximum drilling depth 150 mm With many drills Dimensions 1100 mm x 700 mm x H 1200 mm Weight 412 kg

WEIBERT WJ-LB2 Long-hole drilling machine WEIBERT WJ-LB2 400V 2.2 KW ( 3 hp) n=2840 min. Drilling table size 600x320mm Drilling table height 870mm Drilling depth 245mm Drilling width 205mm Height adjustment 165mm Swivel ling unit swivel -45°/90°/+45° Machine table made of GREY ING! Manual adjustment with handwheel! AGGREGAT AND TABLE FROM MACHINE GREY! G&WJ-LB2 option: Dowel drilling device available with pitch 16-22-25 and 32mm G&WJ-LB-DÜBEL