subcategories
(3rd category level)
Manufacturer:
(Category: 205)
Manufacturer: Busellato, Type: Jet 6000 XXL, Year: 1999, Working range X: 4600, Working range Y-axis: 1700, Working range Z: 150, Vertical drills-X: 11, Drill vertical Y: 9, Horizontal drills-X: 2+2, Drill horizontal Y: 2+2, Year :1999
Manufacturer: Homag, Type: KFR 21 und KFL 21 inkl.Winkelübergabe, Year: 1999, Control: 2 X NC 21, Program: Homatic, System comprising of: 2 Kantenmaschine mit Winklelübergabe, Kantenmaschine mit Doppelenprofiler Teil: 2 Zerspaner + Fügen, getrennte Kette: yes, Laserverleimteil: no, Kantenstärke min-max mm: 0,5-3, Work piece width min-max mm: 45, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-45, Strips min/max mm: no, Machine no 1: KFR 21, MA 1 Arbeitsbreite min-max: 250-2800 mm, MA 1 Kantenmaterialstärke min-max mm: 0,5-3,0, Ma 1 Fügefräsen: yes, Ma 1 Schutzfräsen: yes, MA 1 Feinfräsen: yes, MA 1 Nuten: yes, MA 1 Verleimteil gerade: yes, MA 1 Vorfräsen: yes, MA 1 Radiusfräsen 1: yes, MA 1 Radiusziehklinge: yes, MA 1 Flachziehklinge: yes, MA 1 Schwabbeln: yes, MA 1 Nuten: yes, Angular transfer: yes, Machine 2: KFL, MA 2 Kantenstärke 0,5-3 mm: yes, ...
Manufacturer: IMA mit Verleimung, Type: GX30/E/130/430, Year: 2014, Control: IMA, Software: IMA Woop 10, Barcode: möglich, Maschinensteuerung: IMA Woop 10, Programming station office: yes, Work piece width min-max mm: 1400, Min.-max. workpiece length in mm: 150-4300, Min.-max. workpiece height in mm: 10, C axis: yes, Pendulum processing: yes, Work piece width min-max mm: 1400, Min.-max. workpiece length in mm: 150-4300, Min.-max. workpiece height in mm: 10, Number of milling spindles: 1, Tool adaption system: HSK F-63, rpm 1): 1000-24000, Number of tool changers: 18, Tellerwechseler: 1, Pickup Wechlser: 1, Mitfahrender Werkzeugwechsler: yes, Working widht max mm: 1400, Number of tables: 2, Traverse table: yes, 2 station allocation: yes, Stops in the table front: yes, Vacuum pumps m³/h: 2 X 120, Saw unit: yes, Edgebanding unit: yes 2 Fach Rolle, Edgeband hight mm: 55, Magazine Qty: ...
Manufacturer: Biesse, Type: Rover C6.50 Edge, Year: 2011, Control: Biesse, Software: Works, Work piece width min-max mm: 1.535, Min.-max. workpiece length in mm: 4.600, Min.-max. workpiece height in mm: 225, Working range X: 5.255, Working range Y-axis: 1.963, Working range Z: 350, Pendulum processing: yes, Work piece width min-max mm: 1.535, Min.-max. workpiece length in mm: 4.600, Min.-max. workpiece height in mm: 225, Number of milling spindles: 2, Tool adaption system: HSK F63, Milling engine 1 hours power: 12, Kettenwechsler: 22, Vertical drills-X: 12, Drill vertical Y: 17, Horizontal drills-X: 4, Drill horizontal Y: 2, 2 station allocation: yes, Vacuum pumps m³/h: 250, Saw unit: yes, Edgebanding unit: yes, Edgeband hight mm: 9 - 54, Radial arm machine: yes, Waste conveyor belt: yes, Zentralschnierung: yes, Year :2011
Manufacturer: Uniteam, Type: Unicawood KR, Year: 2011, Control: yes, Year :2011
Manufacturer: Bürkle, Type: RCLS 700, Year: 2014, Finished product: Betonplatten, Work piece width min-max mm: 700, Min.-max. workpiece height in mm: 3 - 80, Min.-max. workpiece length in mm: 400, Feeding speed min-max m/min: 2 - 10, Control: Bürkle, Inlet conveyor: no, IR-Trockner 1: 20 x 3 kW, Transport 1: Band/Stange, Lackwalze 3: RCLS 700, UV Trockner Lampen/Watt: 120, UV Trockner Lampen/Watt: 120, Paint rollers overall: 2, UV Trockner gesamt: 2, IR-Trocker gesamt: 1, UV Trockner gesamt: 2, UV dryer: Easy Cure UV 700, Conveyor belts: 0, FREE TEXT: einschl. Dosierwalzenheizung, Year :2014
Manufacturer: Morbidelli, Type: U 50, Year: 1991, Control: Morbielli, Feeding speed max m/min: 200, Working range X: 3590 , Working range Y-axis: 1800, Working range Z: 55, Milling engine 1 hours power: 5 - 7,5 PS, rpm 1): max 18.000, Vertical drills-X: 14, Drill vertical Y: 16, Horizontal drills-X: 2, Drill horizontal Y: 2, Traverse table: yes, Year :1991
Manufacturer: Homag, Type: Genius 20/50/14/G, Year: 1996, Control: Homatic, Work piece width min-max mm: 1400, Min.-max. workpiece length in mm: 5300, Min.-max. workpiece height in mm: 40 / 60, C axis: yes, Tool adaption system: HSK 63F, Milling engine 1 hours power: 12, rpm 1): 1500 - 18.000, Number of tool changers: 1, Number of tools per tool-magazine: 30, Vertical drills-X: 11, raster table: yes, 2 station allocation: yes, Saw unit: yes, Edgebanding unit: yes, Magazine for edges: 1-fach, Edgeband hight mm: 40, Marking laser: yes, Year :1996
Manufacturer: Microcut, Type: Fagor CNC 800T, Year: 2010, Control: Programm, Year :2010
Manufacturer: Biesse, Year: 2014, Control: Biesse Works, Work piece width min-max mm: 100 - 1.000, Work piece length min-max mm: 90 - 2.500, Work piece thickness min-max mm: 8 - 60, 3 axis control: yes, Vertical drilling station from below: 1, Vertical drilling station from above: 1, Drilling heads overall: 2, Number of milling spindles: 2, Milling spindles horizontal: 1, Power kW 1: 3,5, RPM min-max 1: 7.000 - 15.000, Vertical drills-X: 2 x 13, Drill vertical Y: 2 x 5, Horizontal drills-X: 2 x 2, Year :2014
Manufacturer: Morbidelli, Type: Author 600, Year: 1999, Control: Num 1040/X-Log, Work piece width min-max mm: 1680, Min.-max. workpiece length in mm: 4400, Min.-max. workpiece height in mm: 10-80, Working range X: 4829, Working range Y-axis: 1774, Working range Z: 180(280), C axis: yes, Number of milling spindles: 1, Tool adaption system: ISO, Milling engine 1 hours power: 7,5, Number of tool changers: 2, Number of tools per tool-magazine: 4 + 8, Mitfahrender Werkzeugwechsler: yes, Vertical drills-X: 12, Drill vertical Y: 6, Horizontal drills-X: 4, Drill horizontal Y: 2, Traverse table: yes, 4 station allocation: 4, Stops in the table front: yes, Stops in the table rear: yes, Vacuum pumps m³/h: ca.60, Saw unit: schwenkbar, Radial arm machine: yes, Year :1999
Manufacturer: Morbidelli, Type: U 50, Year: 1991, Control: Num, Min.-max. workpiece length in mm: 150-3150, Min.-max. workpiece height in mm: 10-60, Working range X: 3150, Working range Y-axis: 1300, Working range Z: 60, C axis: no, Pendulum processing: yes, Min.-max. workpiece length in mm: 150-3150, Min.-max. workpiece height in mm: 10-60, Number of milling spindles vertical: 2, Tool adaption system: Schnellspansystem, Milling engine 1 hours power: ca.4,4, rpm 1): 12000/18000, Milling engine 2 hours power: ca.4,4, Number of tool changers: keine, Horizontal drills-X: 2, Drill horizontal Y: 2, Traverse table: yes, 2 station allocation: yes, Stops in the table front: 2 reihen, Vacuum pumps m³/h: 100, Saw unit: yes, Portal machine: yes, machine ready for demonstration: yes, Available: sofort, Year :1991
Manufacturer: SCM, Type: Record 130, Year: 2001, Control: Num, Working range X: 3080, Working range Y-axis: 1200, Working range Z: 280, Number of milling spindles: 1, Tool adaption system: HSK 63, Milling engine 1 hours power: ca.9, rpm 1): 9000-18000, Number of tool changers: 1, Number of tools per tool-magazine: 12, Mitfahrender Werkzeugwechsler: yes, Vacuum pumps m³/h: 120, Year :2001
Manufacturer: Priess und Horstmann Frontenbohrautomat, Type: BAT III, Year: 1994, Control: Priess und Horstmann, Barcode scanner: yes, 3 Achsensteuerung: 3, Working range X: 2 X 1500, Work piece width min-max mm: 190 - 600, Work piece length min-max mm: 100 - 1500, Work piece thickness min-max mm: 10 - 60, Automatic setting up: yes, Drilling supprt from bottom: 7 Spindeln, Drill support from top: yes, Number of milling spindles: 1 , Power kW 2: 2,2, RPM min-max 2: 18000, Sawing unit: 1,6 kW, Line screw running units: yes, Feeding speed max m/min: 60/80/10, Pneumatic clamping: yes, Cycle rate: 400, machine ready for demonstration: yes, FREE TEXT: Maschine ist für Hettich Beschlag/Puffersetzautomat , Year :1994
Manufacturer: Homag mit Verleimteil, Type: Optimat BOF / 40 / G , Year: 2000, Control: WoodWOP, Programmierplatz Büro: yes, Work piece width min-max mm: 1050/1200, Min.-max. workpiece length in mm: 4800, Min.-max. workpiece height in mm: 60/200, C axis: yes, Tool adaption system: HSK F63, Milling engine 1 hours power: 12, rpm 1): 1500 - 18000, Number of tool changers: 1, Number of tools per tool-magazine: 12, Mitfahrender Werkzeugwechsler: yes, Vertical drills-X: 11, Drill vertical Y: 7, Horizontal drills-X: 4, Aluminium sleeking table: yes, 2 station allocation: 2, Stops in the table front: 6 , Vacuum pumps m³/h: 120, Saw unit: yes, Edgebanding unit: no, Marking laser: Laserpositionerhilfe, Radial arm machine: yes, Foot mats: yes, Available: ca. 03/2017, Year :2000
Manufacturer: Homag , Type: Genius 20/50/16/V/G, Year: 1998, Control: Homatic, Feeding speed max m/min: 80, Working range X: 5600, Working range Y-axis: 1600, Working range Z: 60/120, C axis: yes, B-axis: no, Tool adaption system: HSK F 63, Milling engine 1 hours power: 12, rpm 1): 1500 - 18000, Number of tool changers: 1, Number of tools per tool-magazine: 30, Vertical drills-X: 5, Drill vertical Y: 5, raster table: Glattisch, 2 station allocation: yes, 4 station allocation: yes, Stops in the table front: 14, Stops in the table rear: 3, Vacuum pumps m³/h: 66 + 100, Saw unit: yes, Edgebanding unit: yes, Edgeband hight mm: 40, Marking laser: yes, Year :1998
Manufacturer: Gannomat, Type: Super Drill, Control: hand, Drilling engine kW: 2,2, Working range max mm: 120, Drilling beam swivel-mounted: yes, Lochraster: 32, Spindelanzahl 1: 19, Swivel pneumatically 90-45°: yes, Work piece support: yes, Work stations: 1, Foot switch: yes, Max. drilling depth in mm: 80, Max. drilling height in mm: 80,
bore capacity in steel (diameter): 50 mmthroat: 350 mmbore stroke: 180 mmthread capacity: 35 Mspindle taper MT: 4 MKcolumn diameter: 150 mmbore spindle turning speed range: 93-1420 U/mintable-size: 480x480 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: Biesse Rover A Nesting, Type: Rover A Nesting, Year: 2020, Control: Biesse, Working range X: 3140, Working range Y-axis: 1580, Working range Z: 230, C axis: yes, Number of milling spindles: 1, Number of milling spindles vertical: 1, Milling engine 1 hours power: 12, rpm 1): 1800-2400, Number of tool changers: 1, Tellerwechseler: 12, Mitfahrender Werkzeugwechsler: yes, Vacuum pumps m³/h: 120, Saw unit: yes, Portal machine: yes, Werkstückspannsystem: Vakuum, machine ready for demonstration: yes, Automatic setting up table: yes, Charging system single-sided: Hubtisch, FREE TEXT: Entladeband + zusätzlicher Werkstückreinigung/genaue Maschinentechnik kommt noch, Year :2020
Manufacturer: Homag Doppelspindelfräse 4 Achsmaschine, Type: BMG 512, Control: Woodwoop 6.0, Min.-max. workpiece length in mm: 4500, Min.-max. workpiece height in mm: 1600, Aluminium processing: 300, Throuh running machine: yes, Feeding speed max m/min: yes, C axis: 2, B-axis: HSK 63, Pendulum processing: ca.12, Work piece width min-max mm: 1800-24000, Min.-max. workpiece length in mm: ca.12, Horizontal: 1, Number of milling spindles vertical: 14, rpm 1): 9, Milling engine 2 hours power: 6, rpm 2): 2, Number of tool changers: 2, Kettenwechsler: yes, Pickup Wechlser: yes, Working widht max mm: 6, Horizontal drills-X: yes, Belt conveyor: yes, Number of tables: yes, Traverse table: 120, Aluminium sleeking table: Automatisch, roller table: 16, 2 station allocation: yes, Stops in the table rear: yes, Drill vertical: yes, Edgeband hight mm: yes, Magazine Qty: no, Schnittstelle DXF: ink.Werkze ...
bore capacity in steel (diameter): 50 mmthroat: 350 mmbore stroke: 180 mmthread capacity: 35 Mspindle taper MT: 4 MKcolumn diameter: 150 mmbore spindle turning speed range: 93-1420 U/mintable-size: 480x480 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: Biesse , Type: Rover 24, Year: 2002, Software: Compass kann mit gekauft werden, B-axis: 100/50/20, Maschinensteuerung: 6170, Programming station office: 1380, Work piece width min-max mm: 150, Min.-max. workpiece length in mm: yes, Aluminium processing: 1, Throuh running machine: HSK F-63, Feeding speed max m/min: 7.5, Pendulum processing: 1800-24000, Number of milling spindles vertical: 1, Tool adaption system: 24, Milling engine 1 hours power: 8, rpm 1): 7, Milling engine 2 hours power: 4, rpm 2): 2, Working widht max mm: 2, Vertical drills-X: 10, Drill vertical Y: yes, Horizontal drills-X: yes, Drill horizontal Y: 100, Aluminium sleeking table: yes, 4 station allocation: yes, Rigging support table: yes, Edgeband hight mm: yes, Radial arm machine: 1 Winkelgetriebe, machine ready for demonstration: Deckenlaser und Hubschwingen, Year :2002
Manufacturer: Weeke BHH 40 Durchlaufbohrmaschine, Type: BHH 40, Control: Woodwoob, Work piece width min-max mm: 30-800, Min.-max. workpiece length in mm: 250-2200, Min.-max. workpiece height in mm: 12-50, Automatisches Rüsten: yes, Automatic width adjustment: yes, Dowel tools Qty: 4, Dovel diameter mm: 8 X 30, Dovel lenght mm: 30, Min - max dowel centre-to-centre distance mm: 32, Schwingförderer Rohre : 4, Drilling support horizontal: 2, Working range max mm: max.60, Dovel units: 6, Work piece refeeding: yes,
Manufacturer: Weeke, Type: Optimat BP 145, Year: 2001, Control: Homatic 2000 IPC, Software: Woodworp, Working range X: 3250, Working range Y-axis: 1300, Working range Z: 100, C axis: yes, Feeding speed max m/min: 80/60/20, Pendulum processing: yes, Number of milling spindles: 1, Tool adaption system: HSK63F Kegel, Milling engine 1 hours power: 9, rpm 1): 1250-24000 FU geregelt, rpm 2): t, Number of tool changers: 1, Tellerwechseler: yes, Number of tools per tool-magazine: 8, Mitfahrender Werkzeugwechsler: yes, Horizontal drills-X: 4, Drill horizontal Y: 2, Traverse table: yes, Stops in the table front: yes, Stops in the table rear: yes, Vacuum pumps m³/h: 100, Drill vertical: 22, Saw unit: yes, FREE TEXT: 2x Freiplätze für zum Nachrüsten vorbereitet, Year :2001
Manufacturer: Biesse , Type: Skipper 100, Year: 2007, Control: CNI, Online connection: möglich, Machining stations: 2, Work piece width min-max mm: 150-1000, Work piece length min-max mm: 250-3000, Work piece thickness min-max mm: 10-60, 3 axis control: yes, Vertical drilling station from below: 1, Vertical drilling station from above: 1, Double part drilling: yes, Milling spindles vertical: 2, Power kW 2: ca.4, RPM min-max 2: 1800-24000, Vertical drills-X: 13 von unten und oben, Drill vertical Y: 5 von unten und oben, Horizontal drills-X: 4, Drill horizontal Y: 2, Year :2007
Manufacturer: Sorbini / Tagliabue, Type: Walzstrasse, Year: 1998, Work piece width min-max mm: 1.300, Min.-max. workpiece height in mm: 3 - 80 , Min.-max. workpiece length in mm: 300, Feeding speed min-max m/min: 6 - 24, Inlet conveyor: yes, Lackwalze 1: T/20-MF, UV Trockner 1: 1 Lampe, Lackwalze 2: T-20-MF, UV TRockner2: 3 Lampen, Lackwalze 3: T-20MF, UV Trockner 3: 3 Lampen, Paint sander: TAG 13KS DPSTRA, Paint rollers: 3, Year :1998
Manufacturer: IMA, Type: Quadroform C 80/280, Year: 1995, Working range X: 2800, Working range Y-axis: 800, Tool adaption system: HSK 63 F, Milling engine 1 hours power: 7,5, rpm 1): 1500-18000, Number of tool changers: 8, Pickup Wechlser: yes, Vertical drills-X: 5, Drill vertical Y: 9, Number of tables: 1, 2 station allocation: yes, Stops in the table rear: yes, Vacuum pumps m³/h: 80, Saw unit: Wechlser, FREE TEXT: inkl Werkzeuge, Year :1995
Manufacturer: Weinig, Type: Conturex 1, Year: 2004, Control: 840 D, Program: Alphacam, Working range X: 1.500, Working range Y-axis: 250, Working range Z: 125, C axis: yes, Number of milling spindles: 2, Milling engine 1 hours power: 10,5, pm: 18.000, Milling engine 2 hours power: 10,5, pm: 18.000, Number of tools per tool-magazine: 36, Year :2004
used
Bödeker Holzbearbeitungsmaschinen GmbH
