We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
subcategories
(3rd category level)
Manufacturer:
used
Fine drilling head for lid fraes machine, probably FP2, SK40, little used condition. Special price
used
Capacity per oven: 7000kg-8000kg/h, drum diameter: 1200mm, drum length: 1250mm, max. filling volume: 0.6m³, filling weight: 1500kg, max. piece weight: 200kg, air speed: 18m-20m/s, required extraction capacity: 6000m³/h, weight: approx. 15000kg. Including bucket elevator (1500kg), coater (3000kg), dedusting system, conveyor sieve FS 700/800x3200 and various spare parts as good as new. The unit was overhauled in 1998. Documentation available.
used
diameter 200mm, little used, dusted, good condition.4 Bolts with bolt spacing approx. 94mm, Hole circle diameter of the bolts approx. 133mm, the largest diameter of the short cone approx. 106mm, Drawbar in the middle. All information to the best of our knowledge but without any information. Special price
used
An IGB eddy current testing system with Jahnke laser marking and roller conveyors is available. Roller conveyor width: approx. 350mm, total weight: approx. 3000kg. Including feeding station, control cabinets, process control and Z-plate discharge conveyor. Dimensions X/Y/Z: approx. 2300mm/1500mm/2000mm, weight: approx. 300kg. Documentation available. On-site inspection is possible.
used
Radial riveting machine BalTec Type RNE 331 Year of construction: 2009 presumably unused - with rivet mushroom and pressure bowl R=100 - Input voltage 3x400V 50/60Hz - with RC-20 controller with Simod AMS-SSR - With foot switch, pulse contact - with pressure preparation unit - with hand grease press - with standard accessories and operating instructions in German -Color: Light gray Accessories: Rivet stamp 14.0/68 cambered Rivet stamp 16.0/68 cambered Rivet stamp 17.0/68 cambered Rivet stamp 18.0/68 cambered Wooden box 98x70x55cm
used
Treatment width: 8mm-12mm, max. plasma generator diameter: 32mm, plasma generator length: 210mm, cable length: 3m, inlet pressure: 5bar-8bar, gas consumption: approx. 2m³/h, generator power: 300W, frequency: approx. 40kHz, dimensions X/Y/Z: approx. 420mm/140mm/500mm, control: manual/semi-automatic, operating hours: 81h. Documentation available. On-site inspection is possible.
new
1. ELECTRICAL BOX TYPE OVEN Purpose of use : Powder curing Maximum temperature : 220ºC The furnace heating system is designed as forced convection system. It is based on the principle of pumping the oven volume air into the oven with the help of a circulation fan and increasing the oven temperature with the heat transfer provided by the air passing through the heating unit. The walls of the furnace and heating unit are made of modular sheet metal and high density insulated panels. Air distribution ducts with regulated flaps inside the oven ensure that the oven temperature is homogenous at every point. The temperature control device is digital type and provides precise adjustment of the oven temperature. The heating unit is placed on the side, rear or top of the oven and consists of an insulated heating chamber, heating cell with resistance inside, circulation fan that can opera ...
used
A chamber washing system is available. Cleaning chamber dimensions X/Y/Z: 700mm/800mm/800mm, washing medium: water, medium temperature: 55°C-65°C, max. payload: 200kg, wash tank: 900l, rinse tank: 900l, oil separator: approx. 200l, tank material: steel 1. 4301(304L), basket dimensions X/Y/Z: 1200mm/800mm/600mm, spray pressure: 3bar-5bar, dimensions X/Y/Z: approx. 5200mm/2400mm/3000mm, weight: approx. 2300kg, control: Siemens PLC, operating hours: 25342h. Documentation available.
new
Powder coating line for car wheels Able to powder coat 4 pcs of 22" rims in 1 batch Line components: 1,5x1x1,28m powder coating oven, 18KW electrical VFK-2 single sided manual powder coating booth Conveyor track and load trolley Manual powder coating equipment Delivery - 8 weeks EXW Istanbul Factory Assembly and training included
used
A parts cleaning system Per is available. Cleaning medium: Tetrachloroethene (PER), basket dimensions X/Y/Z: 650mm/470mm/295mm, number of tanks: 2, vapor generator: 1, working chamber: 1, control: Siemens S7, basket feed: automatic, dimensions X/Y/Z: approx. 4100mm/3400mm/2600mm, operating hours: 15911h, batch counter: 9792. Ultrasound included. Documentation available. On-site inspection is possible. Available from September 2024.
new
PATRONENFILTER FÜR PULVERBESCHICHTUNGSKABINEN Die Filter bestehen aus 100% reinem Polyester. Nachstehend sind die verfügbaren Standardgrößen aufgeführt 320x600mm 320x650mm 320x1000mm 320x1200mm Andere Größen und Spezifikationen können ebenfalls angefertigt werden. Kontaktieren Sie uns für weitere Informationen und Preise. für Pulverkabinen für Staubabscheider für automatische Maschinen für Pulverbeschichtungsanlagen hoher Wirkungsgrad antistatische Option Option Bajonettanschluss POWDER COATING BOOTH CARTRIDGE FILTERS Filters made of 100% pure polyester. Below are the standard sizes available 320x600mm 320x650mm 320x1000mm 320x1200mm Demands of different sizes and specifications can also be produced Contact us for more information and price. abcs://vogamachine.com for powder booths for dust collectors for automatic m ...
used
Volume: 100l, passage width/height: 300mm/600mm, compressed air consumption per blasting nozzle: 45m³/h, cabin dimensions X/Y/Z: 1900mm/1400mm/1100mm, dimensions X/Y/Z: approx. 3600mm/3600mm/4800mm, weight: approx. 2000kg.
new
2. VFDK-3 WALL TYPE CARTRIDGE FILTERED POWDER COATING BOOTH Wall-type powder coating booths are an economical manual powder coating booth solution for companies producing and powder coating small parts. These powder coating booths save space in the workshop and are a practical method of powder coating the work pieces to be painted. The wall-type coating booths can be combined with conveyors in transfer-type powder coating plants or have a simple conveyor line according to the project. WORKING PRINCIPLE The extraction fan is located at the top of the booth, at the end of the system. The pressurized air flow created by the fan carries the powder coating particles towards the filters and collects them on the outer surface of the filters. Powder coating filters are cartridge type and are cleaned during operation by a pull-reverse filter cleaning system. The pull-reverse system consists o ...
used
A furnace with a roller conveyor is available. Chamber dimensions X/Y/Z: approx. 2870mm/2690mm/2630mm, door opening X/Y: approx. 2450mm/2400mm, outer dimensions X/Y/Z: approx. 4100mm/3000mm/3350mm. The doors on both sides only close with an additional latch. Burner and oil supply have been regularly serviced. On-site inspection is possible.
new
1. ELECTRICAL BOX TYPE OVEN Purpose of use : Powder curing Maximum temperature : 220ºC The furnace heating system is designed as forced convection system. It is based on the principle of pumping the oven volume air into the oven with the help of a circulation fan and increasing the oven temperature with the heat transfer provided by the air passing through the heating unit. The walls of the furnace and heating unit are made of modular sheet metal and high density insulated panels. Air distribution ducts with regulated flaps inside the oven ensure that the oven temperature is homogenous at every point. The temperature control device is digital type and provides precise adjustment of the oven temperature. The heating unit is placed on the side, rear or top of the oven and consists of an insulated heating chamber, heating cell with resistance inside, circulation fan that can opera ...
used
A Sinjet cleaning system is available. On-site inspection is possible.
new
Pulverbeschichtungsanlage für Autofelgen Kann 4 Stück 22"-Felgen in 1 Charge pulverbeschichten Komponenten der Anlage: 1,5x1x1,28m Pulverbeschichtungsofen, 18KW elektrisch VFK-2 einseitige manuelle Pulverbeschichtungskabine Förderstrecke und Ladewagen Manuelle Pulverbeschichtungsanlage Lieferung - 8 Wochen EXW Istanbul Fabrik Inklusive Montage und Schulung Powder coating line for car wheels Able to powder coat 4 pcs of 22" rims in 1 batch Line components: 1,5x1x1,28m powder coating oven, 18KW electrical VFK-2 single sided manual powder coating booth Conveyor track and load trolley Manual powder coating equipment Delivery - 8 weeks EXW Istanbul Factory Assembly and training included
used
A seamless tube drawing machine is available. Drawing machine: outer tube diameter: 22mm/55mm, tube wall thickness: 1mm/3mm, tube length: 5000mm/10000mm, max. tube weight: 32kg. Outer tube diameter (drawn): 15mm/45mm, tube wall thickness (drawn): 0.8mm/2.8mm, tube length (drawn): 7000mm/16000mm, tube material: St37/St52. Total tensile force: 30t, single tensile force: 30t, total cycle time 1 piece/3 pieces 12m tube: 1min/1min. Pipe pointing machine AHM 63 with slide insertion device: Pipe diameter: 20mm-70mm, pipe wall thickness: 1mm-6.5mm, pipe length: 3000mm-10000mm, material: steel, strength: 800N/mm², curvature of total pipe length: 2.5D, roller table lengths: 10000mm, system center over floor: approx. 1700mm. Cycle time (tube to tube): 15s, max. forming force: 4x630kN, stroke rate: 630/min, working height: 1700mm. Documentation available. On-site inspection is possible.
new
CABLE POWDERING MACHINE FOR ELECTRICAL CABLES EXTERNAL DIMENSIONS Length : 1.000 mm Width : 1.000 mm Height : 2100 mm CABLE PASSAGE Size : 100 mm diameter Height from ground : 1.000 mm Cable insulation material : PVC, PE, XLPE to be used Cable size to be powdered: 5–70 mm diameter HIGH VOLTAGE UNIT Input voltage : 14V 16kHZ Output voltage : 100 kV Max. current : 120 µa Polarization : Negative TECHNICAL SPECIFICATIONS OF THE MACHINE Input : 220V 50 Hz Installed power : 1 KW Extraction fan : 3.000 m³/h 0,75KW Vibration : 0,15KW 220V Compressed air : 6-10 bar Air consumption : 300 lt/min Filtration : 320x300mm polyester filter Filter cleaning : Automatic Powder recycling : Vibration sieve Powdering method : Application by 2 electrodes, electro static application
used
A Ruez cooling lubricant system as good as new is available. Capacity: 34720l, filling volume: 32710l, usable volume: 22020l + clean tank volume: 6000l. Level indicator: OWE 2C, inlet/distributor: screen basket, machine dimensions X/Y/Z: approx. 7400mm/2800mm/6000mm. Including integrated sludge scraper and chip conveyor. Including two-part Ruez lamella separator, Ruez safety trough, clean tank, Ruez magnetic roller filter, chip cart superstructure. Without belt filter and sediment system. Documentation available. On-site inspection is possible.
new
Gema, Wagner COST-EFFECTIVE AND VERY LONG LIFE POWDER GUN CASCADES FOR ALL WELL-KNOWN POWDER COATING GUNS MADE IN TURKEY
used
Throughput: 300kg/m², max. working width: 1500mm, max. workpiece thickness: 20mm, min. workpiece dimensions X/Y: 50mm/50mm, number of brushes: 4, brush heads: 2, machine dimensions X/Y/Z: approx. 2800mm/1500mm/1500mm, weight: approx. 1800kg, operating hours: 51h. Documentation available. On-site inspection is possible.
new
1. HEAT CLEANING OVEN Cycle time : 2 - 4 hours Loading : Trolley, manual loading from the door side INTERNAL USEFUL DIMENSIONS Length : 1.870 mm Width : 1.460 mm Height : 1.500 mm (gross) 1.000 mm (net) Interior volume : 4,1 m³ Insulation : Ceramic wool + Rock wool Insulation thickness : 175 mm Maximum temperature : 1.260˚C Heating type : Direct heated Heating source : Natural Gas, LPG or Diesel Combustion chambers : 2 sets Burner capacity : 2 x 350.000 kcal/h Burner : RIELLO (Italy) Overheating control : Stainless steel water spray nozzles – 2 pc Safety control : Stainless steel water spray nozzles –4 pc Oven safety door : 1 set Electrical panel : PLC controlled, Schneider Electric branded switchgear components Control system : Touch screened panel and software system MATERIAL Oven body : Structural steel and sheet metal, spray p ...
used
Travel X/Y/Z: 520mm/370mm/300mm, travel U/W: +/-60mm, max. workpiece weight: 650kg, max. workpiece dimensions X/Y/Z: 790mm/730mm/275mm, max. taper angle: +/-30°/80mm, wire diameter: 0.1mm-0.3mm, wire feed: 200g-2500g, table dimensions X/Y: 750mm/590mm. Machine dimensions X/Y/Z: approx. 2600mm/3300mm/3300mm, weight: approx. 2600kg, control: Fanuc System 16-WB. The machine is in need of repair. Documentation available. On-site inspection is possible.
new
PULVERBESCHICHTUNGSANLAGE, TRANSFER-TYP Aushärteofen - Gas, Diesel oder elektrische Quelle Pulverbeschichtungskabine - Zyklontyp oder mit Patronenfilter Pulverbeschichtungsanlage - manuelles oder automatisches System Hängefördersystem - Raupenfahrwerke und Rumpfform Wir bieten die besten technischen Lösungen und wettbewerbsfähige Preise Deutschsprachiger Ansprechpartner in Deutschland Kontaktieren Sie uns für weitere Informationen und Angebote VOGAMAKINA Ltd. infovogamakinacom
used
A Plakoma brushing and deburring machine is available. The machine was used to remove flame burrs and to clean the surfaces of metal products. It has a stop system and positioning. Including a gantry crane with a load capacity of 16 tons. Individual components of the machine were overhauled in 2008. Documentation available. On-site inspection is possible. Expected to be available at the end of 2025 or beginning of 2026.
new
PULVERBESCHICHTUNGSANLAGE, TRANSFER-TYP Aushärteofen - Gas, Diesel oder elektrische Quelle Pulverbeschichtungskabine - Zyklontyp oder mit Patronenfilter Pulverbeschichtungsanlage - manuelles oder automatisches System Hängefördersystem - Raupenfahrwerke und Rumpfform Wir bieten die besten technischen Lösungen und wettbewerbsfähige Preise Deutschsprachiger Ansprechpartner in Deutschland Kontaktieren Sie uns für weitere Informationen und Angebote VOGAMAKINA Ltd. abcs://vogamachine.com info@vogamakina
used
Two fully automated special construction systems (2017/2019) with integrated deburring units are available. Output: 30 pieces/min, machine dimensions X/Y/Z: approx. 2600mm/1500mm/2900mm. Components: Vibratory feeders as an integrated complete unit for round stainless steel sleeves with hopper, sorting bowl, 3x drop chute, accumulation section and control units, Siemens control system and mobile operating panel, separate control cabinets for the feeder and overall system, Suhner 3-fold drilling quills with belt drive, rotary indexing table with worm gear and 4 work stations with exact 90° as well as Festo pneumatics. Intended use: The machines were built for the production of oval sleeves from round sleeves. The entire process with feeding, sorting, filtering, transport, bending, deburring and discharge is fully automated. Documentation is available. On-site inspection is possible.
new
PULVERBESCHICHTUNGSANLAGE, TRANSFER-TYP Aushärteofen - Gas, Diesel oder elektrische Quelle Pulverbeschichtungskabine - Zyklontyp oder mit Patronenfilter Pulverbeschichtungsanlage - manuelles oder automatisches System Hängefördersystem - Raupenfahrwerke und Rumpfform Wir bieten die besten technischen Lösungen und wettbewerbsfähige Preise Deutschsprachiger Ansprechpartner in Deutschland Kontaktieren Sie uns für weitere Informationen und Angebote VOGAMAKINA Ltd. infovogamakinacom
used
Two fully automated special construction systems (2017/2019) are available. Production output: 3600/h, materials: all materials and geometries that can be plastically formed with rollers, operating hours: approx. 5000h-6000h. Components: Vibratory feeders as an integrated complete unit for round stainless steel sleeves with hopper, sorting bowl, drop chute and control units, Siemens control and display, Pilz safety and guard locking devices and Festo pneumatics. Intended use: The machines were built for the production of oval tubes from round tubes. The entire process with feeding, sorting, filtering, transport, bending and discharge is fully automated. Machine dimensions X/Y/Z: approx. 1500mm/1500mm/2200mm. Documentation available. On-site inspection is possible.