subcategories
(3rd category level)
Manufacturer:
(Category: 109)
Turning tool with indexable jaws, clamp holder, turning tool, indexable insert holder, turning insert, indexable insert steel,-Manufacturer: Mitsubishi, clamp holder turning tool-Type: DGHR2525MS-Dimensions: 157/25/H39 mm-Weight: 0.7 kg
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws -Manufacturer: Holex, soft attachment jaw set, 3-piece, 315 -Type: 313310-315 -Width: 35 mm -Dimensions: see photo technical drawing -Overall dimensions: 145/105/H55 mm -Total weight: 5.2 kg
Face plate, face plate chuck, four-jaw chuck, facing chuck-Chuck size: 500 mm-Taper holder short taper: 6-Inside diameter: 95 mm-Hole circle: Ø 133 mm-Weight: 82 kg
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws-Top jaws: Jaw set for three-jaw lathe chucks, hard-Jaw width: 32 mm-Dimensions: see photo technical. drawing-Total dimensions: 125/96/H73 mm-Total weight: 4.1 kg
Tapping chucks, thread chucks, tapping chucks, tapping attachments -with: slip clutch -Integrated reversing gear with fast reverse -Thread sizes: M1.4-7 -Recording: MK2 -Dimensions: 70/230 mm -Weight: 2 kg
Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding smoke filter, welding smoke extraction, smoke gas extraction fan, filter system, cartridge dust extraction system-Manufacturer: BTR Environmental, Unicell cartridge dust extraction system-Type: C16-2K7-Extraction fan power: 3.0 kW-Inlet: Ø 220 mm-Individual components: see photos-Dimensions: 1210/1040/H2340 mm-Weight: 474 kg
Faceplate, faceplate chuck, four-jaw chuck -Mouth size: Ø 400 mm -Conical mount with groove: Ø 105 mm -Passage: Ø 80 mm -Weight: 35 kg
Bezel traveling, moving bezel, bezel, steady rest, lynette -Manufacturer: Meuser, bezel from lathe type MV SKV/2-1 -Bezel: driving -Max. Passage: Ø 170 mm -Center height: 230 mm -technical drawing: with the photos -Dimensions: 520/405/H510 mm -Weight: 33kg
Tool holder, milling holder, milling tool -Intake: SK50 5 pieces -Sizes: see pictures -Price: complete -Dimensions box: 400/300/H270 mm -Weight: 42.1 kg
live center, live center, live morse taper, live center, live lathe center, live center -Tip: shaft mounted -Recording: MK6 -Quantity: 1 piece available -Weight: 8 kg
Clamping angle for workpiece clamping, measuring device-Dimensions: 400/350/H230 mm-Thickness: 35 mm-Groove: 15 mm-Surface: milled-Weight: 48 kg
Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape-Manufacturer: Erge, heating tape heating sleeve-Type: Ø90 x 30mm-Item No.: 858 762 65-Heating power: 500 W-Voltage: 220 V-Dimensions: 230/160/H80 mm-Weight: 0.4 kg
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws-Top jaws: Jaw set for three-jaw lathe chucks-Jaw width: 27 mm-Dimensions: see photo technical. drawing-Total dimensions: 94/120/H76 mm -Total weight: 3,2 kg
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws power chucks-Top jaws: soft top jaws for wedge bar chucks, helical teeth-Jaw width: 22 mm-Dimensions: see photo technical. drawing-Total dimensions: 95/65/H60 mm-Total weight: 2.2 kg
Clamping plate, unit carrier, milled surface, welding table, welding table -Width of the table surface: 498 mm -Length of the clamping surface: 2525 mm -Height of table surface: 268 mm -Working height: 268 mm -Transport dimensions: 2525/500/H268 mm -Weight: 570 kg
Machine vise lower plate, clamping plate, vice plate, milling machine intermediate plate, turntable -with: T round groove -Dimensions: 270/240/H90 mm -Weight: 13 kg
Pressing pliers, pressing machine, pressing jaws, pressing tools, pressing rings-Manufacturer: Roller, pressing pliers pressing jaws pressing rings set-Sizes: M15, M22, M28, Z1-Individual components: see photos-Dimensions case: 410/220/H65 mm-Weight: 4.7 kg
Turnbuckle nut M12 Quantity: 80 pieces -Packaged: in a parcel -Sale: complete -Weight: 16 kg
faceplate, faceplate chuck, four-jaw chuck, facing chuck-Faceplate: chuck size Ø 560 mm-Bolt circle: Ø 235 mm-Groove width: 27 mm-Through hole: Ø 109 mm-Dimensions: Ø 560 x 290 mm-Weight: 116 kg
Fixators, leveling units, leveling elements, machine feet, leveling shoes, vibration dampers, spring elements -Manufacturer: Stop Choc, vibration dampers, 6 pieces, for machine tools and equipment -Type: Ø 129 mm -Installation height: 27 mm -Price/Sale: complete -Total weight: 9 kg
Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape-Manufacturer: Erge, heating tape heating sleeve-Type: Ø100 x 22mm-Item no.: 832 597 65-Heating power: 400 W-Voltage: 220V-Number: 3x heating tape available-Price per piece-Dimensions: 250/160/H60 mm-Weight: 0.3 kg/pc.
Step chuck, precision chuck, bell chuck, step collet, ring chuck, collet sleeves, collet, tool holder, tool holder, collet sleeves -Manufacturer: Schaublin, Step chuck precision chuck mount MK6 -Size: 81 to 106 (see photos) -Overall dimensions: Ø 131 x 175 mm -Weight: 5.3 kg
Pipe sealing cushion, leak sealing cushion, sealing plate, pipe sealing, penetration sealing -Pipe sealing cushions -Outer diameter: 84 mm -Height: 20 mm -Bolt circle: Ø 51/7 mm -Supply of: steel/stainless steel cover plates possible -Number: 299 pillows available -Price: per piece -Minimum order quantity: 5 pieces -Weight: 0.1 kg/piece
Collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets-Quantity: 15 collets -Various sizes: Ø 3/3x4/2x3/2x6/7/3x8/9/10/11 mm -Price/Sale: complete -Weight: 1 kg
Countersink, countersink, deburring countersink -Manufacturer: Roterberg, Countersink Senkmeister 3 -Countersink: 45° / Ø 35 mm -Recording: MK3 -Number: 3x countersinks available -Price: per piece -Dimensions: Ø 60 x 250 mm -Weight: 1.8 kg
Mounting plate, scribing/marking plate, measuring plate, measuring table, welding table, welding table, straightening plate -Width: 510 mm -Length: 350 mm -Height: 60 mm -Dimensions: 510/500/H190 mm -Weight: 120 kg
Clamping angle for workpiece clamping-Dimensions: W/H/L 600/405/710 mm-Thickness: 26 mm-Surface: milled-Weight: 167 kg
Tool holder, milling tool holder -Number: 6x SK50 recording -various versions -Ø 56 x 110 mm -Ø 46 x 130 mm -Ø 52 x 90 mm -Ø 42 x 80 mm -Ø 42 x 55 mm -Ø 32 x 60 mm -End milling cutter -Price/Sale: complete -Total weight: 24 kg
Angle grinder, cutoff grinder-Grinding wheels: Ø 180 mm-Power: 2300 W-Speed: 8500 rpm-Dimensions: 525/180/H140 mm-Weight 6.5 kg
hydraulic rope hoist, hoist, grab hoist, hydraulic cylinder for rope-hydraulically operated: cable pull-Max. Pulling force: 12 t-each: 1 pull cylinder with accessories-Number: 2 pieces-Price: per piece-Dimension: Ø 115 x 685 mm-Weight: 28 kg/piece
