subcategories
(3rd category level)
Manufacturer:
(Category: 202)
Specifications / Technical Data S-400/T CNC portal fraesmachine / engraving machine, TUeV certified Already more than 4500 CNC machines of type High-Z sold worldwide ! With the T-variant of the High-Z CNC-Fraesmaschine you acquire old-fashioned technology with the certain I-T-Tpfelchen The High-Z/T is designed for even more accuracy (repeatability about 0.01mm ) and especially for higher travel speeds. The high-Z/T CNC fraes machine achieves fantastic accuracy and an almost unmeasurable reversal of about 0.01mm due to the ball-circuit spindles used. At the same time, high travel speeds of up to 108mm/second ( 6500mm/ minute) can be achieved. Thus, engraving and fraes speeds of up to approx. 4500mm/min can be realized and fast-moving speeds up to approx. 7000mm/min. This is just as applicable in the industrial sector for work such as engraving, frause, drilling, measuring, cutting, as wel ...
Specifications / Technical Data S-400/T CNC-Portal-Router / CNC-Engraving machine with TÜV certification With the purchase of the T-variation of High-Z cnc-router you get a proven technology with a certain icing of the cake in TÜV-certified quality. High-Z/T cnc-routers was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T 3D-cnc-engravers achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machines you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on a unloaded drive with the new High-Z / T. This 3D-milling-machine series is usable in the indust ...
AUTOMATIC DOVETAILING machine OMEC 750 I second hand machine machine is utilised to indent dovetails for drawers and various furniture elements CE compliant machine: YES machine also for curved pieces instruction and certification booklet: YES tool / cutter: YES volt. 380/50
Makita chain moulder 7101, 110V This article is in good and working condition. Chain mortiser for fast, clean, and precise nicks or cuts through holes in wood. Ideal for timber-frame houses, sheds, huts, restoration and much more.
Hitachi chain moulder 110 V This article is in good working condition. The chain size is 30 mm and is out of focus. Chain mortiser for fast, clean, and precise nicks or cuts through holes in wood. Ideal for fences, sheds, huts, restoration and much more.
Type TP4 Spindle rotation speeds 20 000 U/Min/rpm Table dimensions 900x770 mm Weight 800 kg Transport dimensions 1800 x1000x1000mm
Type : T900 Spindle-30 mm spindle rotation speeds- 2500 / 5000 /8000U /Min/rpm Spindle tilt- 5° to +45° spindle trave-140 mm max. clamping height-125 mm max. tool diameter-230 mm Table dimensions-1020x700 mm table height-900 mm dust collector plug-60/120 mm engine power-3 kW 400V weight net/gross-280 kg packaging dimensions-1150x1155x730mm
Weibert WJ-F30 Table milling machine 5.5 KW R + L barrel swiveling 3000 to 10000 U/1 Control Panel top Safety rulers WJ 600500
Spindle diameter 30 mm Spindle speeds (4 levels) 1800/3000/6000/9000 RPM Spindle stroke 100 mm Spindle turning - 5° up to + 30 ° Max clamping height 105 mm Work table 710 x 640 mm Table height 900 mm G & HM-FS200S-STI
Engine power: 400V 3 KW 4 HP, 2 engines Formatschiebetisch: 1500mm Cutting height: 103 mm Blade: swivel, max. 315 mm Milling cutter: starr 90° Blower rpm: Rpm: 1500/3500/6000/8000 RPM. WJ-400100 K NET 2990,-new
AUTOMATIC TWIN TABLE SLOT MORTISER Type BALESTRINI 2/CAP RECONDITION MACHINE Max oscillating length mm. 120 Max. mortise depth mm. 80 Spindle collect diameter mm.13 Max. bit diameter mm. 20 Spindle motor power: Hp 3 Oscillating motor power: Hp 1 Spindle rotation: rpm 9000 Volt. 380/50
AUTOMATIC TENONER machine BALESTRINI 2/TAO AUTOMATIC MORTISER machine BALESTRINI 2/CAP recondition machines volt. 380/50 NOT SEPARATE SALE
AUTOMATIC HYDRAULIC HORIZONTAL COPY LATHE Type BULLERI 110 / 4 MANDRINS N. 4 DISTANCE BETWEEN MANDRINS mm.320 MAX. WORKING DIAMETER mm.315 MAX. ADMITTED LENGTH mm.1200 MAX. WORKING LENGTH mm.1000 ROTATION SPEED rpm 4850 N.02 CUTTER MOTOR CUTTER MOTOR POWER Hp 7,5 each one HYDRAULIC PUMP MOTOR POWER Hp 1,5
DOUBLE AUTOMATIC TEMPLATE SHAPER MACHINE Type BALESTRINI C70 Max. working width mm. 360 Max. working heigth mm. 120 Feed : from 1 to 8 mt./min. ( automatic or pedal variation ) n.02 Router Shaft diam. mm.30 n.02 Router Shaft motor power Hp 5,5 each one n.01 Hydraulic advance variable spped motor power Hp 1 net weight : kgs. 1000
WJ-F102-1150 Mill: swivel 90-45 Spindle speeds (6 steps) 3000/4000/5000/6000/8000/10000 rpm Sliding table:1150mm (Optional 1600mm) M?o?t?o?r?l?i?i?t?u?n?g?: 400V 3 kW (4.0 hp) max. clamping height: 125 mm Table opening: 270 mm max. tool diameter retractable: 260 mm Options at extra cost: Telescope 900mm Eccentric tensioner Milling motor 4 KW (5.5hp), S1 100% Milling motor 5.5 KW (7.5 hp), S1 Milling spindle 40.50 or 60mm Integral safety rails 500mm Right and left-hand running milling cutter Table extension right/left
Year & Manufacturer: SCM Dimensions (mm): 5500 × 2500 × 1600 Power supply: 380 V – 50 Hz Power: 2 × 4 kW (sawing units) + 2 × 4 kW (milling units) Working parameters: Max. working width approx. 3000 mm – Max. workpiece thickness approx. 180 mm – Chain length approx. 2200 mm Parts capacity: Two heads on each side Included equipment: 2 sawing units (blade Ø350 mm), 2 milling units (spindle approx. 90 mm), chain conveyor, separate control cabinet Remarks: SCM D80 type machine. Motor speed: 3000/6000 rpm. Auction-ID: A1-50001-23
Year & Manufacturer: 2001 — MECANOBOIS Dimensions (mm): 3000 × 2200 × 1600 Power supply: 400 V Auction-ID: A1-50001-24
5.5 and 2x 2.1 Kw with 4 axles, of which the two rear axles of 40 mm for tool holder. The two front axles are equipped with HM pin heads of 160 x 30 mm. Depth / height stop adjustable. Separately supplied 2 pin heads of D=140 mm and 150 mm pin length milling size. With thermal switch. Auction-ID: A1-48994-22
Frame can be tilted 90 degrees Dovetail sled with router Scheer Router shaving speed from 11000 rpm. With four rulers with a pitch of 32 -32 -25 -20 mm. With three guide fingers for those rulers of 32-25-20 mm. Auction-ID: A1-48994-29
With a Holz-her power supply. On a pallet. Auction-ID: A1-49727-7
Tilting axle braked up to 45 degrees. On a pallet. Auction-ID: A1-49727-10
ASSFALG edge milling machine type KKF 4 for machining and milling workpiece edges Compact tabletop machine with large, transparent protective cover and two selectable speeds Auction-ID: A1-49712-9
Cutting edge milling machine type BU/FR 90-3 for machining and post-processing of cut edges Industrial version with separate control panel and digital display Technical data Manufacturer: Reichel GmbH / Bubenheimer Maschinen Machine: Cutting Edge Milling Machine Type: BU/FR 90-3 Year of manufacture: 1990 Factory No.: 9545 Power: approx. 2 kW Electrical connection: approx. 400 V / 50 Hz / PE Separate control panel Digital displays Emergency stop Workpiece guide / stop available Extraction system: HOLZKRAFT Transport dimensions control (L × W × H): approx. 800 × 500 × 1,100 mm Transport dimensions extraction (L × W × H): approx. 800 × 400 × 1,800 mm Auction-ID: A1-49712-7
ASSFALG edge milling machine type KKF 4 for machining and milling workpiece edges Compact tabletop machine with large, transparent protective cover and two selectable speeds Auction-ID: A1-49712-33
900 € 
