subcategories
(3rd category level)
Manufacturer:
(Category: 202)
I sell a tenon machine for parallel milling, grooves for pallet tape etc. WACO T2-SL Year of construction 1984. Groove width 30mm. Motor 3,3kW Made in Germany. Available the same. With dokumentazion.
module: Diameter: mmboring diameter: mmSprocket cutterDIN3968 Parting 65RO36 R1 EK 20°The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Copy lathe Manufacturer: Hempel Model: CKS-12 For the production of moulded turned parts in small series Without the use of moulded steels Scanning via sheet metal template or wooden model Turning length max.: 1200mm Rotary diameter max.: 250 mm Spindle motor: 5.5 KW Hydraulic motor: 2.2 KW
Protective cover for framing curly parts on the ring etc. This protective device is often recommended by the BG. Maximum fraeser diameter 160mm With start-up ring, brushes and brake wedge for the start-up bearing Obviously hasn't been used much before. The machine can be demonstrated by appointment with us on site. We only offer machines that are ready for preparation in our warehouse, see "further offers from this supplier".
Professional spindle grinding machine with iron table and tilting and thread cutting KUSING SFnc3 1200. Technical parameters: Power of the main engine: 3 kW (4 hp) Spindle diameter: ø 30 mm Spindle length: 140 (120) mm Stroke of the spindle: 170 mm Maximum tool diameter: ø 180 mm Tool speed: 3000/5000/8000 rpm The size of the iron table: 1020 x 700 mm Tilt: 0-45° Weight of the machine: 500 kg
Professional spindle grinding machine with aluminum sliding table and tilting device KUSING SFna 1200. Technical parameters: Power of the main engine: 3 kW (4 hp) Spindle diameter: ø 30 mm Spindle length: 140 (120) mm Stroke of the spindle: 170 mm Maximum tool diameter: ø 180 mm Tool speed: 3000/5000/8000 rpm The size of the iron table: 980 x 450 mm Size aluminium table: 1200 x 360 mm Tilt: 0-45° Weight of the machine: 320 kg Formatting trolley of the highest quality according to the principle of hardened rod guide (ALTENDORF principle) KuSING has been manufacturing woodworking machines since 1991.
I sell a combined pin cutting machine with drill head BALESTRINI I2F 1 swivel table with pneumatic material pressure. Automatic cutting saw from below. Milling head for pin or finger joint production. Drill head for dubel drilling production 3 spindle. Feed automatically. End sensors positioning. Available the same.
I sell radius copy milling unit for edges suitable for CNC machining center machines with edge banding HOMAG, WEEKE, BIESSE, SCM, MORBIDELLI, HOLZ-HER, IMA, FELDER, MASTERWOOD, BUSELLATO, etc. n 12,000 rpm. Radius R2mm. HSK63 posture. Available the same.
Copy machine, copying lathe with electronic control Make: Hempel Model: CKE 15 Working length max. 1500 mm Workpiece diameter max. 250 mm Milling motor 11 KW Spindle motor 3 KW Hydraulic motor 3 KW Grinding motor 0.55 KW, hydraulic grinding unit Noise/dust protection cabin
End Milling Machine Drill Milling Machine working width mm: 3200 Left - right swivelling saws from 0° - 45°. Complete with drilling unit Suitable for machining doors and door posts.
1 x used double-sided Rotoles S600 with 2 grinding units and 1x brush Working width 600mmm Speed 60m/min Calibration milling planing machines with feed rollers Best accuracy of the boards and excellent results in delamination attempts, at any speed. ROTOLES S calibration machines are the best choice for calibrating boards and slats before gluing. Rotoles S calibration milling planing machines with feed rollers Best accuracy of the boards and excellent results in delamination attempts, at any speed. ROTOLES S calibration machines are the best choice for calibrating boards and slats before gluing.
Working width from to: 140 mmWorking height from to: 20,80 mm: endlos mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Table dimensions: - mmMotor output: 7,5 kWSpindle diameter: 40 mmreus: 6000 U/minWeight: 300 kgYear: 2018 Universal profiler Götzinger UP 1730Machine for frontal and cross-side machining.Different application technology for wood productsFirst-class surface quality of machined workpieces due to high speed,Particularly stable bearing of the milling shaft and through synchronous milling.Rapid tool change through one-sided mounted cutter shaft and throughswiveling clamping device.The whole work process, such as clamping, pneumatic-hydraulic table feedwith speed control (stepless) and fast reverse.By exchanging the milling segments and by changing the attachment pointscan be up to ten different with a single profile milling setCreate profile companies.Technical specifications:Cutting depth max .: 30 mmMilling height max .: 150 mmVoltage cross section per stroke max.Softwood: 60 cm²Motor pow ...
Verticale drilling unit, 3 spindles suitable for IMA - incompatible with a Weeke plug
Adaptation unit with drill chuck for verticale drillings with 1 spindle Price per unit 2 Units available suitable for IMA - incompatible with a Weeke plug
Angular milling unit suitable for IMA - incompatible with a Weeke plug
Dowel wreaths for dowel cut-out and chamfing machine solver type AA 220 available for the following dowel diameters: Ø 5mm = 3 pieces Ø 6mm = 6 pieces Ø 8mm = 6 pieces Ø 10mm = 6 pieces Ø 11mm = 3 pieces Ø 12mm = 4 pieces Total 28 pieces. Especially for the wreaths for 6 and 8 mm dowels, special designs are included, for dowels 6x20 or 8x25.
Weibert WJ-F40 Table milling machine Milling spindle 30mm 90° 4 speeds 1400/3500/6000/8000 rpm Table casting L= 1000mm W= 500mm 2.2 KW 400V Right+Left Run WJ-600300 + Options
CATALOG NUMBER 6024 TECHNICAL DATA - 2.9kW main engine - 0.75kW spindle motor - 0.75kW trolley feed motor - 380V power supply - dimensions length / width / height 1600x1100x1200mm - weight 891 kg Machine equipped with: - 2 tables with dimensions of 300x340mm - pneumatic clamps - angularly adjustable tables in two planes - the possibility of making long and round tenons on the tables - table speed and spindle speed regulated mechanically - adjustable up / down tables - pin width adjustment Net price: PLN 16900 Net price: EUR 3885 Net price, calculated at the rate of 4.35 PLN / EUR (with larger exchange rate fluctuations the price may change)
ROOT START REDUCER LOG END REDUCER60 m / min for logs with diameter 60 cm - 4 logs / min at roller conveyor feed rate 30 m / min for logs with diameter 60 cm - 3 logs / min Maximum removal 200 mm Max log diameter 700 mm measured 1500 mm measured 1500 mm from the root and length min 3.2 m max 6.2 m Number of cutting tools 30 Cutting tool width 60 mm Cuttin motor 37 kW, 1500 rpm
Round End tenoner Manufacturer: Pade Model: TSU Tenon width: 4-100 mm / + pin thickness Tenon thickness: 4-30 mm Tenon depth: 10-50 mm Support tables 2 pieces for reciprocal work Support tables Tiltable
Automatic double copy milling machine - longitudinal copy milling machine Manufacturer: Wigo Model: 1075 Working length: Workpiece with straight end faces .. 1300mm Wersktück with rounded end faces .. 1000mm Working width: max. 200mm Working height: max. 130mm Feed continuously 0.5 - 12 m/min Milling units: 2 x 4 KW Hydraulic unit: 1.1 KW Additional 2 milling unit on the right side. Clamping cylinder pneumatic: 2 pcs.
- Structure in stainless steel - Workpiece fixing system - Table adjustable - 2 milling spindles - 2 multifunction drilling spindles - Switch box
Dimensions mm: 3200 X 2200 Milling depth mm: 35 Total connection KW: 1.2
Edge thickness max mm: 3 Workpiece thickness max mm: 60 Total connection kW: 1.1 Weight Kg: 110
Turning machine Heavy execution Peak width 250mm Peak length 1350mm Copying facility large chuck
Type MX5117B Work table dimensions 1130x670 mm Spindle speed diameter 35 mm Spindle rotation speed 6000-8000-800-10000 rpm Max. working thickness 120 mm Motor power 4 kW Dust exhaust outlets 200x65, 200x80 mm Transport dimensions 1130x670x1100mm Weight 325 kg
BALLISTRINE- C 70 N- auto feed thru (2) sided shaper(2) 10HP; 3PH spindle motors • (2) 30mm diameter spindles with 5in. under the nut • Spring loaded floating spindles • In-feed and out-feed rubber covered upper feed rollers • Working width 14.4in. (360mm) max • Working height 4.8in. (120mm) max • Min working length 9.6in. (240mm) • Spindle 8,000 RPM • feed 3 to28..Price-$8,900
