| Description: |
D-CNC ROUTER MILLING MACHINE FRESATRICE CNC-STEP High-Z S-1400/T
Specifications / Technical Data S-1400/T
CNC-Router and
CNC-Engraver / Engraving Machine
(Attention: Pictures
are showing the type with trapezium spindles, thats the only different
to the t-series )
With the purchase of
the T-variation of High-Z CNC-router you get a proven technology with
a certain icing of the cake in TÜV-certified quality. High-Z/T
cnc-routers are conceived for once more precision (repetition
precision approx. 0,02mm) and especially for higher traverse
speed.
Because of the used ball screws the High-Z/T
cnc-machines achieves a fantastic precision and an almost unmeasurable
back lash of approx. 0,01mm. At the same time there are high traverse
speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible.
With this 3D-cnc-machine you're able to carry out an
engrave and mill speeds of approx. 4500 mm/min. and express travels up
to 6500mm/min.
Here's a video on a unloaded drive
with the new High-Z / T.
This 3D-cnc-milling machine
series is usable in the industrial field as well as for works like
engraving, milling, drilling, measuring, cutting and measuring out
systems as for example adhering of adhesive on 3D outlines.
With the S-1400 cnc-routers you are able to mill in
almost all materials. Additional linear rail ways from HIWIN at X-axis
are making the machine extreme stable. With the two trapezium nuts at
X and y axis you are able to adjust backlash too.
High quality components and a optional underframe leave none
wishes open. So you are able to do that too: Milling in a big metall
sheet cabinet. Work further like a professional and arrange a
demonstration today in our house.
All cnc-machines
are being delivered with black energy-chains on all axis, which allows
a better cabling management. Also, all machines are equipped with an
emergency stop button. An additional emergency stop you find in front
of the controller.
Basic equipment
of all High-Z CNC-milling machines:
Software
ConstruCAM-3D limited ( from S-720 and S-400/T ) included
To
use the software CAD CAM ConstruCAM in full screen, you need the
milling software version WIN PCNC Economy upward
Contact free reference switch and emergency stop button
as well as 22mm thick linear guide ways and individually adapted screw
nuts
------------------------------------------------------------------
--------------
Equipment / Productdetails:
oDrive : 4 stepping motor by Nanotec with 1600
steps/rev (1/8 Step)
o2 motors for constant tension and
compression during milling operation on X-Axis
oGuide ways X 22mm
and Y axle 30 mm / Z Axis 16mm, grinded and with 61hrc hardened
surface
oFeed through of long workpieces possible, because there's
no belt drive at the end of the X-axle
oAdditional linear
guide rails 15mm from HIWIN for the X Axis
oBall bearings at
both sides of ball screws on X and Y axis
oTraverse speed of
rapid feed: max. 7000 mm/min
oTechnical resolution : 0,0079375 mm
( 1/8 Schritt )
oReversal error max.: +/- 10µm ( 0,01mm )
oTable size / clamping area: 1730 x 880 mm
oTraverse Paths:
X=1400 mm; Y=780 mm; Z= 110 mm
oReference- and limit switch on all
axes
oDouble safety emergency stop button
oEnergy chain for
clean cabling
oTotal dinemsions incl motors: L x W x H = appr.
1750 x 1040 x 500mm
oMilling Motor anchorage: Euroneck Ø43mm
oincl. Software WIN PCNC Light (optional WIN PCNC Economy, USB or
professional)
oincl. Software ConstruCAM-3D limited (
recommended sell price full version 1902.81 EUR)
oModular
frame for universal application ( shown underframe optional, 980 Euro
incl VAT )
oWeight appr. 76 kg
oComplete machine with Included
4 driver microstep controller 4x 2.1 Ampere, T-Groove plate and Kress
milling motor 1050 Watt incl. 8mm collet
oAn approx.
30-minute long introduction during pick up and an unlimted telephone
support are included.
oAn approx. 2 hours long introduction
and an installation of software on your brought note book/ PC as well
as a explanation of fundamental terms of Corel Draw etc. possible,
too.
------------------------------------------------------------------
--------------
C4444965
Technical data contained
in the price TÜV-certified control system, tailored to the CNC
milling machine / CNC engraving machine:
o
4-Channel Stepper motor -CNC-Controller with actual
SMD-Technology
o Main voltage 115 - 240 Volt / 47 - 63
Hz.
o Motor current 4 x 3,5 Ampere
o Microstep
controller Resolution 1/10-Step / 2000 Steps/Rev.
o 4
Connections for 4 brushless Motor / Stepper motor
o
Connection with parallel port and Software WIN PCNC Light, Economy or
USB with WIN PCNC USB or
Profi version. ( Also
possible:MACH3, USBCNC, NC-Easy LINUX EMC and LINUX CNC and much
other
stepper driver software.)
o "Sleep-Function"
for controlling current down
o Oszillation motor-Connection
24 Volt by PWM controllable ( for example: Tangential knife ) or
24 Volt constant for motor Break by ST-plug
o 2 relais for
maximum 1200 Watt by Software switchable (up from WIN PCNC Light), 230
Volt,
max. 6,0 A / Plug (for example Air compressor, cooling,
exhaust, dust extraction).
o 0 - 10 Volt for connecting a HF
converter for an high frequency spindle
o 12 Status-LEDs for
monitoring all important function (Power, Toggle, Move, X, Y, Z, C;
Overheat,
Emergency stop, Relais: Spindle / Cooling, Short
Circuit)
o Connection possibility of 4 end- or. Reference
switches and one Emergency Stop switch
o Motor connection by
D-Sub 9-pin. (C-Axis: 15-pin.)
o Emergency-Stop Switch
o Overheating protection
o Short circuit protection
------------------------------------------------------------------
--------------
fresadora fresatrice fraiseuse Jyrsintae
fraisage machin Freesmachine Frezesanas masina frezavimo masinos ?
Frezarka Freza Fraesmaskin Frézovací stroj Frézka ?; New ready for
operation
seller offer No. resale 67805429
|