| Description: |
WOOD CNC ROUTER 3D MILLING MACHINE CNC-STEP High-Z S-1000/T
Specifications / Technical Data S-1000/T
CNC-Router /
CNC-Engraver
With the purchase of the T-variation
of High-Z CNC-router you get a proven technology with a certain icing
of the cake in TÜV-certified quality. High-Z/T was conceived for once
more precision (repetition precision approx. 0,02mm) and especially
for higher traverse speed.
Because of the used ball
screws the High-Z/T CNC-engraver achieves a fantastic precision and an
almost unmeasurable back lash of approx. 0,01mm. At the same time
there are high traverse speeds up to approx. 108mm / sec. ( 6.500
mm/min ) possible.
With this cnc-machine you're
able to carry out an engrave and mill speeds of approx. 4500 mm/min.
and express travels up to 6500mm/min.
Here's a
video on a unloaded drive with the new High-Z / T.
This
cnc-router series is usable in the industrial field as well as for
works like engraving, milling, drilling, measuring, cutting and
measuring out systems as for example adhering of adhesive on 3D
outlines.
All cnc-routers / cnc-milling-machines
are being delivered with black energy-chains on all axis, which allows
a better cabling management. Also, all machines are equipped with an
emergency stop button. An additional emergency stop you find in front
of the controller.
Basic equipment
of all High-Z CNC-milling machines:
Software
ConstruCAM-3D limited ( from S-720 and S-400/T ) included
Contact free reference switch and emergency stop button
as well as 22mm thick linear guide ways and individually adapted screw
nuts
------------------------------------------------------------------
--------------
Equipment / Productdetails:
o Drive : 4 stepping motor by Nanotec with
1600 steps/rev (1/8 Step)
o 2 motors for constant tension and
compression during milling operation on X-Axis
o Guide ways X and
Y axle 22 mm / Z Axis 16mm, grinded and with 61hrc hardened surface
o Feed through of long workpieces possible, because there's no
belt drive at the end of the X-axle
o Ball bearings at both
sides of ball screws on X and Y axis
o Traverse speed of rapid
feed: max. 7000 mm/min
o Technical resolution : 0,00625 mm ( 1/8
Schritt )
o Reversal error max.: +/- 10µm ( 0,01mm )
o
Table size / clamping area: 1300 x 700 mm
o Traverse Paths: X=1000
mm; Y=580 mm; Z= 110 mm
o Reference- and limit switch on all axes
o Double safety emergency stop button
o Energy chain for clean
cabling
o Total dinemsions incl motors: L x W x H = appr. 1320 x
840 x 500mm
o Milling Motor anchorage: Euroneck Ø43mm
o incl.
Software WIN PCNC Light (optional WIN PCNC Economy, USB or
professional)
o incl. Software ConstruCAM-3D limited(
recommended sell price full version 1902.81 EUR)
o Modular
frame for universal application
o Weight appr. 51 kg
o
Complete machine Includet 4 driver microstep controller 4 x 3,5
Ampere
o An approx. 30-minute long introduction during pick
up and an unlimted telephone support are included.
o An
approx. 2 hours long introduction and an installation of software on
your brought note book/ PC as well
as a explanation of
fundamental terms of Corel Draw etc. possible, too.
------------------------------------------------------------------
--------------
Technical data contained
in the price TÜV-certified control system, tailored to the CNC
milling machine / CNC engraving machine:
o
4-Channel Stepper motor -CNC-Controller with actual
SMD-Technology
o Main voltage 115 - 240 Volt / 47 - 63
Hz.
o Motor current C4444965 4 x 3,5 Ampere
o
Microstep controller Resolution 1/10-Step / 2000 Steps/Rev.
o
4 Connections for 4 brushless Motor / Stepper motor
o
Connection with parallel port and Software WIN PCNC Light, Economy or
USB with WIN PCNC USB or
Profi version. ( Also
possible:MACH3, USBCNC, NC-Easy LINUX EMC and LINUX CNC and much
other
stepper driver software.)
o "Sleep-Function"
for controlling current down
o Oszillation motor-Connection
24 Volt by PWM controllable ( for example: Tangential knife ) or
24 Volt constant for motor Break by ST-plug
o 2 relais for
maximum 1200 Watt by Software switchable (up from WIN PCNC Light), 230
Volt,
max. 6,0 A / Plug (for example Air compressor, cooling,
exhaust, dust extraction).
o 0 - 10 Volt for connecting a HF
converter for an high frequency spindle
o 12 Status-LEDs for
monitoring all important function (Power, Toggle, Move, X, Y, Z, C;
Overheat,
Emergency stop, Relais: Spindle / Cooling, Short
Circuit)
o Connection possibility of 4 end- or. Reference
switches and one Emergency Stop switch
o Motor connection by
D-Sub 9-pin. (C-Axis: 15-pin.)
o Emergency-Stop Switch
o Overheating protection
o Short circuit protection
------------------------------------------------------------------
--------------
fresadora fresatrice fraiseuse
Jyrsintae fraisage machin Freesmachine Frezesanas masina frezavimo
masinos ? Frezarka Freza Fraesmaskin Frézovací stroj Frézka ?; New
ready for operation
seller offer No. resale 67805431
|