Manufacturer:
(Category: 102)
Inv. Num. : 8708 Type: GENOS L3000-e Producer: OKUMA Created: 2021 Parameters: Switch-on hours: 7963 h Hours: 4206 h Maximum turning length: 500 mm Max. turning diameter: 300 mm Maximum main spindle power: 22 kW Maximum spindle speed: 3800 1/min Number of all tools: 12 pieces Weight: 7700 kg Equipment: C-axis Y-axis CNC tailstock Tool probe Powered tools VDI Holder Powered Tool Holders (5 pieces)
max. bar material dia.: 65 mmmax. swing diameter: 175 mmmax. bar length: 3.000 mmcontrol: System TX 8F travel -x axis: 140 mmtravel -z axis: 520 mmCNC lathe | TRAUB - TNC 42/65 DG equipped with bar loader.The machine is in a well-maintained condition and can be inspected at any time under power.The machine videos from the production plant will be shared on request.Technical data of the machine will follow soon.We ask for your understanding !- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: TNC65 | TNC-65 |TNC 42-65 DG | TNC 42/65DGThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 165 mm, 330 mm, 2800 U/min
WEILER Condor lead and pull spindle lathe (overhauled) Circumferential diameter over bed 300 mm Center width 800 mm Turning diameter over carriage 170 mm Gr. workpiece weight between the tips 100 kg Bed width 240 mm Spindle bore 38 mm Spindle speeds 24 - 2800 rpm Spindle motor 3 KW Z-travel 800 mm X-travel 170 mm Z1-travel 100 mm Lead screw diameter 24 mm Thread pitches: 35 Metric 0.35 - 12 mm 40 Witworth 2 - 45 Gg / " 25 Module 0.2 - 4 Module 32 Diametrical Pitch 5 - 90 D.P. Tailstock quill stroke 110 mm Tailstock quill diameter 50 mm Tailstock quill cone 3 MK 2-axis digital display 3-jaw chuck Multifix holder B with 8 cassettes Rotating grain tip Tailstock Thread Device: Metric, Witworth, Module, Diametral Pitch Geometrically outdated!
turning diameter: 820 mmturning length: 2.000 mmcontrol: SIN 810 D center height over square guideway: 400 mmturning diameter over slide rest: 500 mmx-travel: 540 mmz-travel: 2.100 mmfeed x/z-axis: 0,01 - 50 mm/minrapid traverse X-axis: 5,00 m/minrapid traverse Z-axis: 10,00 m/minfeeding force facing: 12.500 Npower feed longitudinal: 20.000 Nspindle turning speed range: 6,4 - 1.600 U/minspindle turning speed - gearbox stage 1: 6,40 - 376 1/min.spindle turning speed - gearbox stage 2: 27,40 - 1.600 1/min.power capacity at 60% / 100 % load: 46,00 / 37,00 KWmax. torque at 60% / 100% load: 5.073 / 4.069 Nmconstant cutting rate: 1 - 9.999 m/min.spindle head DIN 55027 - Size: 11 spindle diameter in front bearing: 170 mmspindle bore: 128 mmtailstock quill taper MT: 6 diameter of quill: 125 mmquill stroke: 280 mmthread pitch: 0,1 - 400 mmtotal power requirement: 35,00 kWweight of the machine ca. ...
A Mazak CNC 5-axis turning and milling center with counter spindle is available. Swing diameter: 820mm, machining diameter: 820mm, machining length: 1500mm, max. workpiece weight in chuck/between centers: 650kg/150kg, main spindle speed: 1600rpm, spindle bore: 185mm, power: 30kW/40kW, tailstock force: 15kN, quill stroke: 1466mm, tool holder: BT50, spindle speed: 10000rpm, travel X/Y/Z: 870mm/500mm/1600mm, rapid traverse: 40m/min. Machine dimensions X/Y/Z: approx. 6500mm/3700mm/3200mm, weight: approx. 26000kg, control: Mazatrol Matrix. Documentation available. An on-site inspection is possible. The machine is located in China.
HAAS ST-15 CNC lathe was built in 2020 in the United States by HAAS AUTOMATION, INC. This highly efficient machine with a compact design is an excellent choice for both unit and series production. Workpieces with a maximum length of 406 mm are machined inside a large workspace by means of a high-speed spindle and precision cutting tools, taken from a 12-position turret. All this is complemented by intelligent CNC control, in which advanced machining programmes are created in just a few steps. The HAAS ST15 CNC turning center weighs 3584 kg. Technical specifications of the HAAS ST-15 metal lathe - CNC controller: HAAS - swing over over bed: 419 mm - bar diameter: 64 mm - maximum turning length: 406 mm - feed in the X/Z axis: 200/406 mm - rapid traverse in the X,Z axis: 30.5 m/min - thrust force in the X,Z axis: 14679 N - maximum spindle rotational speed: 4000 rpm - maximum spi ...
CNC controller: SIEMENS SINUMERIK 840D-ERGOLINE Capacity X-axis travel mm: 725 Y-axis travel mm: ± 50 Z-axis travel mm: 300 Turning length mm: 160 Max. turning diameter mm: ø: 250 Swing over bed mm: ø: 320 Tool magazine Magazine places: 16 Tool holder: VDI-30 Tool length max. mm: 390 Tool diameter max. mm: 140 Lower turret Number of tool slots St .: 12 Speed driven tools RPM: 4.000 Drive power driven tools kW: 11,7 Milling function: Yes Main spindle Speed spindle rpm: 5.000 Drive power spindle kW: 11,7 (40% ED) Maximun torque Nm: 280 / 360 (100% / 40% ED) Coolant system Tank capacity liter: 980 L High-pressure bar: 8 / 20 Equipment Chip conveyor CE conformity Coolant gun Air blast / coolant switch-over Internal coolant supply Paper band filter Automatic workpiece magazine loader - 16 positions x ø 220 Working time hours ...
HAAS DS-30 CNC lathe was built in 2013 in the United States by HAAS AUTOMATION, INC. The machine, designed for machining workpieces with a maximum diameter of 457 mm, offers excellent efficiency, reliability and precision. Inside a large workspace there are two spindles with a C-axis, which enable the machining of both sides of a workpiece in a single work cycle. The tool head, in turn, allows for the attachment of both fixed and driven tools. This solution increases the flexibility of the machine by enabling it to be adapted to specific production needs. All this is complemented by advanced CNC control with many useful functions. The HAAS DS30 CNC turning center weighs 7221 kg. Technical specifications of the HAAS DS-30 metal lathe - maximum turning diameter: 457 mm - maximum turning length: 660 mm - swing over bed: 806 mm - swing over cross slide: 527 mm - feed in the X/Z axis: ...
1x INDEX ER25 (built in 1974) with milling device (IRCO bar feeder with weight feed) 3x INDEX 25 (model years 1973-76) 4x INDEX C29 (years 1970-81) 3x INDEX DG12 (years 1972-75) 1x INDEX DG20 (built in 1972/73)
Guide and tension spindle lathe Lathe Lathe Weisser Heilbronn Junior Heidenhain Control with cabin incl. oil pan Last test 05/2025 (see picture) The machine is in perfect condition and can be delivered nationwide for € 350. We will be happy to answer any questions you may have at any time. We are looking forward to a good cooperation and thank you for your interest in advance.
turning length: 1.300 mmspindle diameter: 120 mmspindle bore: 38 mmcontrol: SIEMENS - 840 D numbers of positions in the tool changer: 12 tool taper: VDI 30 CNC Turning- and Milling Center | NILES-SIMMONS - N10 equipped with Y-axis, turret for driven tools, steady rest, and tailstock.The machine is in well-maintained condition.For further technical details, please refer to the attached offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: N-10 | N 10 | N10/2 | N10-2The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Tip height: 175 mm Center width: 800 mm Circumferential diameter over bed: 350 mm Circumferential diameter over support: 310 mm Spindle bore: 46 mm Speed range: 25 - 2000 rpm With digital display
Ravensburger, Type KT 45, built in 1978 Tip height above bed 600 mm Tip width faceplate for support 450 mm Face plate diameter 1,000 mm Turning diameter in the recess max. 1,350 mm with digital display Power 18.5 kW
Specifications: - Center height 220 mm - Turning diameter over bed 440 mm - Center height over bridge 330 mm - Turning diameter in the offset 630 mm - Center height / turning diameter via support 135 / 270 mm - Center width 1000 mm - Spindle bore 52 mm - Mounting cone of the tailstock quill MK 4 - Travel of the tailstock quill 310 mm - 18 spindle speeds 25 - 2000 rpm - Feeds longitudinal + flat - Metric Threads / Withworth Threads / Module Threads / DP Threads - Drive 400 V / 6 kW - 4-jaw chuck with interchangeable jaws and center punch, new Multifix size B with 3 inserts
Turning diameter over bed (mm) 365 Turning length (mm) 1000 Spindle bore (mm) 42.5 Max. rotary diameter over carriage (mm) 205 R.P.M. / Speed 38 - 1600 (16x) Accessories: Digital display 2 axes 3 B. chuck 250 mm, 4. B. chuck 200 mm, documentation and Multifix steel holder
Make: Colchester Type / Model: Student Center width: 500 mm Passage: 42 mm Tip height: 175 mm Turning diameter over bed: 350 mm over slides: 200 mm Speed range: 34 to 1,500 mm Feed lengthwise: flat: 0.04 to 0.25 mm/rev Connection: 1.1 / 2.2 kW Accessories: Steel holder, 3-jaw chuck, 4 jaw chucks, steel bracket Weight: approx. 800 kg Dimensions: 1,550 x 900 x 1,200 mm
: 0554 mm: 370 mm: 2000 mm: 280 mm: 104 mm: 11 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 0390 mm: 240 mm: 1250 mm: 190 mm: 54 mm: 5,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 680 mm, 1300 mm, 4000 1/min
Year of construction 2003 Spindle Hours 11600 Siemens Control 810D max. circulation 680 mm Circulation via X-guide 565 mm Longitudinal travel 1300 mm Planweg mm 315 Spindle head h5 Spindle diameter in front bearing 150 mm Spindle bore 107 mm Chuck diameter 315 mm max. torque 600 Nm Spindle speed 4000 rpm Rapid traverse X-axis 60 m/min Rapid traverse Z-axis 45 m/min Tool carrier for 12 tools Powered Tools 12 Tool holder VDI 40 Quill stroke 120 mm Recording MK 5 Dimensions of the machine with chip conveyor L/W/H 570/2600/2210 mm Machine weight approx. 10000 kg Accessories: Bezel clamping range 30-245 mm Conveyor Lathe chuck
The machine is in good technical condition, testing possible after prior agreement. including a new chip remover
CNC controller: Siemens 840D sl with CELOS ERGOline Capacity X-axis travel mm: 480 (–10) Y-axis travel mm: ±100 Z-axis travel mm: 845 B-axis travel mm: ±110° (0,001º) C-axis: 360º (0,001º) Turning length mm: 800 Max. turning diameter mm: ø: 500 Distance between spindle centers mm: 1.020 Turn-mill spindle Speed spindle rpm: 12.000 Drive power kW: 22 / 19 Tool magazine Magazine places: 24 Tool holder: HSK-A63 Tool length max. mm: 300 Tool diameter max. mm: 125 Tool weight max kg: 7 Main spindle Speed spindle rpm: 5.000 Drive power spindle kW: 25 / 34 (100 / 40%) Spindle bore mm: 67 Maximun torque Nm: 380 / 280 Counter spindle Speed spindle rpm: 6.000 Drive power spindle kW: 20 / 27 (100 % / 40%) Spindle bore mm: 52 Maximun torque Nm: 170 Counter spindle travel mm: 800 Coolant system Tank capacity liter: 600 L High-pre ...
Inv. Num. : 8679 Type: VL 5S Producer: Emag Created: 2007 Parameters: Control system: Siemens 840 SL Feed length X-axis: 570 mm Feed length Z-axis: 200 mm Max. turning diameter: 220 mm Maximum workpiece weight: 120 kg Maximum spindle speed: 4500 1/min Max. workpiece height: 110 mm Weight: 6500 kg Equipment: Turret with Leiftool drive Chip conveyor
Inv. Num. : 8680 Type: VSC 250 DS Producer: Emag Created: 2007 Parameters: Control system: Siemens 840 SL Table diameter: 260 mm Feed length X-axis: 680 mm Feed length Z-axis: 200 mm Maximum turning length: 100 mm Max. turning diameter: 250 mm Maximum workpiece weight: 40 kg Motor power: 35 kW Length: 3800 mm Width: 2100 mm Height: 2400 mm Weight: 7500 kg Equipment: Chip conveyor
Horizontal CNC lathe with double spindle and two working spaces. Muratec MW 40 Year of Make: 2017 Original price: 260.000,- € net Current leasing rate: 2,678 € LNS FOX Spray Cabine, built in 2017 SPECIFICATIONS Machine Type: Lathe Front Spindle Construction: horizontal lathe Chuck size: 135 mm (5 inches) Number of spindles: 2 pieces Turret: 2 à 10 stations Spindle speed: 10,000 rpm Drive power: 3.7 / 2.2 kW
CNC Lathe Manufacturer: Gildemeister Type: CTX 420 linear V3 Year of Make: 2003 Control: Heidenhain Plus IT Circumferential diameter over bed: 680 mm Circumferential diameter over face slide: 565 mm Plan travel: 260 mm Longitudinal travel: 635 mm Drive power: 40/ 100% 25/37 kW Speed range from – to: 20 – 5000 rpm Weight approx.: 6500 Kg Equipment: Driven tools: 12 stations Tool carrier: 12-cavity Sauter revolver VDI 30 Partial hollow clamps Tailstock Quill stroke automatic Quill holder: Mk 5 Conveyor Measuring arm Oil mist extraction Errors excepted
: 0400 mm: 246 mm: 1250 mm: 195 mm: 54 mm: 7,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 2500 mm, 8000 mm
Poreba TZB-250 CNC Heavy Duty Modular Lathe Fanuc Oi-TF CNC Control with MPG Pendant (Retrofit 2015), 78.74” 4-Jaw Face Plate Type Chuck, 98.42” Swing Over Bed, 314.96” Maximum Turning Length, 125.98” Maximum Swing Over Gap, Spindle Speeds 0.5-1000 RPM, 4.13” Spindle Bore, 4-Way Tool Post, 35,275 Lbs. Approx. Weight Capacity (Unsupported), Power Tailstock, Open Steady Rest, 75 HP Spindle Motor, S/N 1132 070
Gurutzpe B1800/3 CNC Lathe Fanuc Oi-TD CNC Control, 52” Swing Over Bed, 372” Between Centers, 36” Cushman 4-Jaw Independent Chuck, 41” Swing Over Carraige, Spindle Speeds 1-300 RPM, 4.33” Spindle Bore, Sauter 4-Position Turret, 48,400 Lbs. Weight Capacity (Unsupported), 70,500 Lbs. Weight Capacity (2 Steadies), Hydraulic Tailstock, (3) Roller-Type Steady Rests, Full Length Scale on Z-Axis, Hennig Chip Conveyor [CNC Retrofit 2010]
