Manufacturer:
(Category: 102)
Key data: 600 mm, 2000 mm
CNC Lathe Manufacturer: Gildemeister Type CTX 500 Year of manufacture 1999 little used max turning length 2000mm Driven tools every 2nd turret station 315mm three-jaw chuck Schunk Bezel SMW Machine is in TOP condition Geometrically it is also still very good, deviation at 2000mm 0.02mm. Machine is available from week 18. For further information, I am available to you at any time at 01778957069.We also have Whatsapp.
Two lead and feed screw lathes by Weiler are available. 1) Weiler Condor VS-2, distance between centers: 800mm, center height: 155mm, swing diameter over bed/cross slide: 330mm/160mm, speed: 2800rpm, machine dimensions X/Y/Z: approx. 1900mm/900mm/1500mm. 2) Weiler Praktikant M, distance between centers: 650mm, center height: 160mm, swing diameter over bed/cross slide: 320mm/175mm, machine dimensions X/Y/Z: approx. 1700mm/1000mm/1700mm, weight: approx. 700kg. Both machines show isolated individual functional limitations, but are operational. Documentation available. On-site inspection is possible.
A CNC lathe Gildemeister including a chip conveyor and a Forkat chuck is available. 1) Gildemeister NEF CT 60, year of manufacture: approx. 1982, distance between centers: 1000mm, turning length: 1000mm, max. turning diameter: 460mm, center height: 300mm, bed width: 450mm, spindle bore: 107mm, speed: 3015rpm, tool stations: 12, quill diameter: 100mm, quill stroke: 180mm, machine dimensions X/Y/Z: approx. 5400mm/2100mm/2000mm, weight: approx. 7000kg. 2) Chip conveyor Allweiler GB 30L 38L. Without Filter. Documentation available. An on-site inspection is possible.
Inv. Num. : 6136 Type: CTX alpha 500 Producer: DMG Gildemeister Created: 2008 Parameters: Control system: Siemens 840 Switch-on hours: 22803 h Hours: 11505 h Maximum turning length: 500 mm Maximum turning diameter: 200 mm Maximum turning diameter over bed: 500 mm Distance between tips: 780 mm Maximum spindle speed: 6000 1/min Maximum workpiece weight: 45 kg Weight: 4500 kg Equipment: Filtration Bar Feeder CNC Spacesaver SS 2500 (2018)
Year of manufacture 1980s/90s Technical data: Tip height: 185 mm Center width: 750 mm Turning diameter over bed: 370 mm Spindle bore: 36 mm Bed width: 250 mm Speed range: 38 - 1600 rpm Tailstock mount: MK 3 Quill stroke: 110 mm Dimensions (WxDxH), approx.: 1950 x 900 x 1200 mm Weight, approx.: 800 kg Equipment: - 3-jaw lathe chuck, brand: Röhm, ø 200 mm - Quick-change holder with 4 inserts - Bed stop - Chip tray
The machine is in good technical condition, after prior agreement it is possible to test it. Max. turning diameter over the bed 450 mm Max. machining diameter 320 mm Max. machining length 500 mm Distance between centers approx. 640 mm X-axis travel 160 mm Z-axis travel 540 mm Spindle bore diameter 65 mm Spindle taper CM4 Max. spindle speed 4,000 rpm Main motor power approx. 15 kW Turret head 8–12 tools Tool clamping type VDI Control system FANUC 18T (most common) Tailstock Usually no Bar feeder No Machine dimensions (L × W × H) approx. 3,650 × 1,200 × 1,980 mm Weight approx. 4,800 kg Power supply 400 V / 50 Hz
turning diameter: 640 mmturning length: 1.185 mmcontrol: SINUMERIK 840D swing diameter: 640 mmdistance of spindle heads: 1500 mmslide I:: X1 / Y1 / Z1 / B slide travel X-axis: 550 mmslide travel Z-axis: 180 mmZ- Travel: 1.185 mmB - axis: 240 °feed x-axis: 0 - 40.000 mm/minfeed y- axis: 1 - 24.000 mm/minFeed z- axis: 1 - 70.000 mm/minfeed B-axis: 1 - 20 1/minrapid traverse X/Y/Z: 40 / 24 / 70 m/minfeed capacity X/Y/Z: S6: 7,00/11,00/7,50 kNtool taper: HSK 63 turning speed milling-spindle: 10 - 12.000 1/minpower capacity at 100 % load: 13,20 kWpower capacity at 40 % load: 22,00 kWtorque milling spindle: 60 / 100 Nmtool magazin:: no. of workpieces in the magazine: 46 Stücktool length - max.: 350 / 200 mmtool diameter: 80 mmwotkpiece diameter with 2 vacant positions: 120 mmweight of tools max.: 6 / 10 kgslide II:: X2 / Z2 slide travel X-axis: 180 mmZ- Travel: 1.050 mmfeed x-axis: 1 - 24.0 ...
CNC lathe Okuma LB 4000 EX – MY C750 Control: OSP-P200L Year of Make: 2008 Turning length: 750 mm Turning diameter: 430 mm Swivel diameter over bed: Ø 670 mm Swivel diameter over slide: Ø 480 mm Speed: 42 – 4,200 rpm Tool turret V12 (all places driven) Equipment: One touch IGF Chip conveyor Touchsetter 3-jaw chuck (Kitagawa B212)
Control Siemens Sinumerik 840D Max. turning diameter 280 mm Max. rod passage main spindle 61 mm Turning length 490 mm Speed main/sub-spindle 4700 / 6000 min-1 12-fold revolver with applied revolver Wkz. C-axis Y-axis Parts catcher Workpiece ejector Chip conveyor Various tool holders
A conventional universal lathe Bulmak with gap bed (gap-bed lathe) is available. Center height: 210mm, turning diameter over bed/cross slide/in gap: 440mm/230mm/620mm, distance between centers: 1000mm, spindle speed: 2000rpm, bed width: 360mm, travel X/Z: 250mm/130mm. Machine dimensions X/Y/Z: approx. 3100mm/1300mm/1400mm, weight: approx. 2500kg. The machine is partially defective. On-site inspection is possible.
An untested conventional turret lathe WMW with extensive accessories is available. Machine dimensions X/Y/Z: approx. 2500mm/1600mm/1200mm, weight: approx. 2000kg. An on-site inspection is possible.
turning diameter: 820 mmturning length: 6000 mmturning diameter over slide: 520 mmHolder Multifix: control: Siemens type: 805 tailstock quill taper MT: 6 transmission ratio: 2 turning speeds: 8-1600 U/minbed width: 560 mmspindle bore: 128 mmfaceplate: 600 mm3 jaw chuck Forckrath: 400 mmsteady: 250-500 mmchip conveyor: diameter of quill: 125 mmquill stroke: 280 mmtotal power requirement: KVAweight of the machine ca.: 12 tdimensions of the machine ca.: 9,5x2,5x2,5 mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us ...
faceplate diameter: 2000 mmturning diameter: 2500 mmturning speeds: 0,5-100 U/minmax. workpiece weight -without tailstock: 6000 kgmax. workpiece weight between centres: 25000 kgPlate area: mmturning diameter in the pit: 3200 mmtotal power requirement: 55 kWweight of the machine ca.: tdimensions of the machine ca.: 22x5x4 mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data fo ...
turning diameter over bed: 1100 mmturning diameter over slide rest: 740 mmturning length: 6000 mmspindle bore: 110 mmturning speeds: 16-1600 U/mindigital readout: faceplate: mm3-jaw chuck: steady: total power requirement: 22 kWweight of the machine ca.: 11 tdimensions of the machine ca.: mYear of manufacture 1999Control: Siemens 840DTurning length (mm) 6000Max. turning diameter (mm) 1100Max. turning diameter over slide (mm) 740Spindle diameter (mm) 105Speed 16 - 1800 (18x)kW 22Voltage 380VHz 503-jaw chuck ø (mm) ¦4-jaw chuck ø (mm) ¦Fixed steady rest ø (mm) 2xThrough-spindle cooling ¦Multifix tool postThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More ...
turning diameter over bed: 540 mmturning diameter over slide rest: 340 mmturning diameter in the gap: 800 mmlength of gap: 350 mmturning length: 3000 mmturning speeds: 40-1800 U/minbed width: 340 mm3-jaw chuck: 255 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mNo. 65The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was ...
Inv. Num. : 8904 Type: SB-CNC Producer: SPINNER Created: 1999 Parameters: Maximum turning length: 250 mm Maximum turning diameter: 285 mm Spindle diameter: 42 mm Maximum spindle speed: 8000 1/min Weight: 1500 kg
CNC lathe Okuma LU 300 M 2SC1000 Control: OSP-P200L Year of Make: 2007 Turning length: 1,000 mm Turning diameter: 340 mm Swivel diameter over bed: 530 mm Swivel diameter over slide: 410 mm Spindle bore 72 mm Speed: 45 – 5,000 rpm 2 Tool Turrets A-turret: 12 tool positions (driven) B-turret: 8 tool positions Equipment: Tailstock Transformer Touchsetter Chip conveyor OneTouch IGF
DMG MORI NTX 2000/1500 SZM CNC turn-mill center was built in 2018 in Japan by DMG MORI CO., LTD. The machine on offer is an excellent choice for the mass production of precision parts, which are used in such industries as automotive or aerospace. This is because the NTX 2000/1500 SZM enables simultaneous turning and milling of workpieces with even the most complex geometries, in a single working cycle. The combination of these two processes significantly reduces production costs, as well as overall working time. The machining process is performed by using the state-of-the-art technology available on the market. It includes, among others, two spindles with a labyrinth cooling system. This system was designed for frequent use of high-pressure coolant. It ensures a constant zero-point height throughout the working cycle, regardless of the amount of generated heat. To limit the effect of ...
Key data: 230 mm, 460 mm, 25 U/min
Optimum D460x1500 lathe – fully functional Description: For sale is a used Optimum lathe D460x1500, built in 2006/01. The machine is fully functional and ready for immediate use in the workshop and production. It is ideal for turning medium-sized metal and steel parts. Technical data: Manufacturer: Optimum Model No.: D460x1500 Year of construction: 2006/01 Circumferential diameter over bed: 460–465 mm Circumferential diameter over upper slide: 270 mm Circumferential diameter without bed bridge: 690 mm Center width: 1500 mm Tip height: 230 mm Bed width: 300 mm Spindle bore: 58 mm Spindle cone: MK 6 Spindle mount: Camlock ASA D1–6 Speed range: 25 – 2,000 rpm⁻¹ Longitudinal feed: 0.031 – 1.7 mm/rev Transverse feed: 0.014 – 0.784 mm/rev Thread metric: 0.1 – 14 mm Thread imperial: 1/2 – 2 gears/inch Motor power ...
CNC lathe Okuma LB 3000 EX II Control: OSP-P300LA Year of manufacture: 2018 Turning length: 500 mm Turning diameter: 340 mm Swing diameter over bed: 530 mm Speed: 45 – 5,000 rpm Tool turret: 12 places (driven) Tool holder: BMT 65 Equipment: - Chip conveyors - Parts catcher - Touchsetter - Programmable sub-spindle - Bar feeder prepared - One Touch IGF - 3-Jaw Power Chuck Kitagawa
CNC Turning/Milling Centers CTX 410 /2 Management Heidenhain Plus IT - 3 cheek chuck - Driven tool stations - Tailstock - Chip conveyors - Coolant tank
CNC Turning/Milling Centers CTX 410 Management Heidenhain Plus IT - 3 cheek chuck - Driven tool stations - Tailstock - Chip conveyors - Coolant tank
CNC Turning and Milling Center Okuma Multus B300 II Control: OSP-P 300SA Year of manufacture: 2023 Travels: Turning length: 900 mm Turning diameter max. 630 mm X-axis 580 mm Y-axis 160 mm (+80/-80 mm) Z-axis 935 mm B-axis 225° (-30° / +195°; 0.001° steps) C-axis 360° Mount: HSK-A 63 Total tool stations: 40 locations Spindle speed: 50 – 5,000 rpm Accessories: - Chip conveyors - Tailstock design NC-controlled, MT5 - Touchsetter - High-pressure pump IKZ 40 bar - Renishaw touch probe prepared - 3-jaw chuck Kitagawa B212 Ø304 mm
Inv. Num. : 8258 Type: XE35N Producer: Hanwha Created: 2018 Parameters: Switch-on hours: 8482 h Operating hours: 6915 h Maximum turning length: 60 mm Maximum spindle speed: 6500 1/min Spindle bore: 35 mm Length: 2060 mm Width: 1440 mm Height: 1760 mm Weight: 2750 kg Equipment: Collets Chip conveyor Bar Feeder 2 driven holders on the sub-spindle C-axes on both spindles Medium pressure pump (15 bar) Guide tubes
Inv. Num. : 8891 Type: HT 20 RIII Producer: Hitachi Seiki Generated: 2000 Parameters: Maximum turning length: 304.8 mm Max. turning diameter: 203.2 mm Maximum turning diameter over bed: 450 mm Maximum spindle speed: 5000 1/min Travel X: 400 mm Travel distances Z: 600 mm Number of tool positions: 12 Length: 2730 mm Width: 1930 mm Height: 1400 mm Weight: 4600 kg Equipment: Grasshopper Technical documentation Tool Holder Mayfran Chip Conveyor Hainbuch clamping
Control Siemens SINUMERIK 828D Rotary diameter. [mm] 288 Turning length [mm] 243 Workspace max. turning diameter 288mm max. machining length 243mm X-axis 175mm Z-axis 350mm Main spindle Chuck diameter 210mm max. rod diameter 67mm Spindle bore diameter 76mm Drive power 10.5/20 kW Max. torque 213.7 Nm max. speed 4,500 rpm Tailstock Quill diameter 65mm Quill stroke 80mm Axial force 4,312 N Center Punch Holder MT4 Tool turret Number of tool stations 12 Tool holder BMT45 Powered Tools Yes max. speed 5,000 rpm
Parallel Lathe SCULFORT type MAXICAP SENIOR 380 x 4000 RN Between points: 4000 mm Maxi Ø on bench: Ø 780 mm Maxi Ø over saddle: Ø 580 mm (rear trolley dismantled) - Ø 500 mm (without rear trolley dismantled) Maxi diameter in brocken bed: Ø 1160 mm Width in brocken bed: 400 mm Spindle: Ø 80 mm Spindle speed: from 16 to 1280 RPM Square turret 3-jaws chuck Ø 400 mm Threadings: Metric + Withworth 3 points steady max Ø 350 mm Tailstock CM6 Motor power: 13 CV Feeds: auto transverse + longitudinal Clutch rapid used Lubricant tank Dimensions (L x W x H): 6500 x 1800 x 1900 mm Weight: approx 7 T
The new Hans Schreiner infinitely variable turning lathe with leading spindle and feed rod and cross feed. Hardened and cut bed and gear wheels. Main spindle,tapered roller bearings and v-ledges.Camlock mount C4, top slide ratatable by 360°, tailstockadjustment +/- 5 mm for taper turning. Good metal-cutting performance, infinitely variable speed via electronic speed control with digital speed indicator. Incl. three-jaw chuck 160 mm and steady rest. Technical data:Center height 140mmDistance between centers 650 mmmax. turning diameter 289 mmSpindle bore 38 mmSpindle cone MK 5Clamping cone tailstock MK 3 Spindle speeds 50 - 1125 RPM and 100 to 2250 RPMSpeeds 2Main motor power 1,5 kW S6Voltage 230 VoltWeight 230 kgStandard equipment:3-jaw chuck 160 mm with changeable jaws for internal turningcenter pointOptional equipment:2 axis digital displayUnderframe w ...
Precision full gear, lead, pull, shift spindle lathe, bed and gear gears hardened and ground. Main spindle, tapered roller bearings and wedge bars plan/upper slide can be adjusted. Camlock mount C5, upper slide 360 rotatable. Tailstock adjustment +/- 5 mm for taper turning,High clamping capacity, DIN acceptance protocol, operating and spare parts list.Dial rings metricWith 3-axis Sino digital display and removable bedStandard equipment:Sino 3-axis digital displayTool Quick-change holder E
